POLARIS IN-GWS-P-RZRXP RZR XP Glass Windshield Instruction Manual
- June 13, 2024
- Polaris
Table of Contents
POLARIS IN-GWS-P-RZRXP RZR XP Glass Windshield
Product Information
The product you have chosen is the IN-GWS-P-RZRXP windshield for your vehicle. This windshield is designed to provide protection from wind and debris while driving. It comes with various components including the Windshield, Seal, Bulb Seal, Wiper, Clamps, and U-Seal.
Contact Information
For any questions or assistance with installation, please contact us:
Email: sales@superatv.com
Website: www.superatv.com
Phone: 1-855-743-3427
Operating hours:
- Monday – Thursday: 8:00 am – 8:00 pm EST
- Friday: 8:00am – 7:00pm EST
- Saturday: 9:00am – 2:00pm EST
Product Usage Instructions
Please follow the instructions below to properly install the IN-GWS-P-RZRXP windshield:
Preparation
- Do not discard the packaging until the product has been successfully installed.
- Read the instructions and view the illustrations before beginning.
- Raise the front of the Roof if applicable. Resecure after installation is complete.
- To ease installation, soak the Bulb and U-Seals in hot water before cutting or installing to increase flexibility.
Installation Steps
Step 1: Install U-Seal
Install the U-Seal along the top edge of the Windshield as shown.
Step 2: Install Bulb Seal
Install the Bulb Seal at the bottom of the Windshield as shown. Ensure that
the bulb always faces toward the vehicle.
Step 3: Install Clamps and Seal
- Separate the Clamps and set them aside.
- Install the Grommets from the Clamps into the Frame.
- Install the Seal to the side of the Frame.
- Repeat these steps for the opposite end.
Step 4: Install Wiper Components
- Separate the components shown from the Wiper and set them aside.
- Install the previously removed Wiper components to the Frame.
Step 5: Install Wiper and Handle
Install the Wiper and Handle, then tighten them securely.
Step 6: Secure the Windshield with Clamps
Install the Windshield to the machine and secure it with Clamps as shown.
Additional Assistance
If you need further assistance with your installation, please refer to the
contact information provided above or reach out to our customer support team.
INSTALLATION INSTRUCTIONS
Glass Windshield: for Polaris RZR XP® 1000 (2024)
-
Do not discard packaging until the product has been successfully installed.
-
Raise front of Roof if applicable. Resecure after installation is complete
-
To ease installation, soak Bulb and U-Seals in hot water before cutting or installing to increase flexibility
-
Install Grommets, from Clamps, into the Frame.
-
Install Seal to the side of Frame.
-
Repeat steps for the opposite end.
-
Install Windshield to machine.
-
Secure with Clamps as shown.
Liability Statement
- SuperATV’s® products are designed to best fit user’s ATV/UTV under stock conditions. Adding, modifying, or fabricating any factory or aftermarket parts will void any warranty provided by SuperATV® and is not recommended. SuperATV’s® products could interfere with other aftermarket accessories. If user has aftermarket products on machine, contact SuperATV® to verify that they will work together.
- Although SuperATV® has thousands of satisfied customers, user should be aware that installing lift kits, long travel, or suspension kits, tires, etc. will change the ride of machine and may increase maintenance and part wear. Operating any off road machine while, or after, consuming alcohol and/or drugs increases risk of bodily harm or death. No warranty or representation is made as to this product’s ability to protect user from severe injury or death. SuperATV® urges operators and occupants to wear a helmet and appropriate riding gear at all times.
- By purchasing and installing SuperATV® products, user agrees that should damages occur, SuperATV® will not be held responsible for loss of time, use, labor fees, replacement parts, or freight charges. SuperATV®, nor any 3rd party, will not be held responsible for any direct, indirect, incidental, special, or consequential damages that result from any product purchased from SuperATV®. The total liability of seller to user for all damages, losses, and causes of action, if any, shall not exceed the total purchase price paid for the product that gave rise to the claim.
- SuperATV® will warranty only parts provided by SuperATV®. Any damage or problems with OEM housings, bearings, seals, or other manufacturers’ products will not be covered by SuperATV®. SuperATV® parts and products are not warrantied if item was not installed properly, misused, or modified.
- Installing, adding, modifying, or fabricating any factory or aftermarket product to your ATV/UTV may violate certain local, state, and federal laws. Be advised that laws vary depending on town, city, county, state, etc. Use of certain products on public streets, roads, or highways may be in violation law. The Buyer is solely and exclusively legally and personally responsible for any violation of the law by the installation or use of the product. You must abide by all local, state, and federal laws, including but not limited to vehicle safety, traffic laws, and ordinances. It is your responsibility to know the laws and how they apply to you.
- The Buyer is responsible to fully understand the capability and limitations of his/her vehicle according to manufacturer specifications, warnings and instructions and agrees to hold SuperATV® harmless from any damage resulting from failure to adhere to such specifications, warnings and/ or instructions. The Buyer is also responsible to obey all applicable federal, state, and local laws and ordinances when operating his/her vehicle while using this product, and the Buyer agrees to hold SuperATV® harmless from any violation thereof.
2753 Michigan Road • Madison, Indiana 47250 • 855-743-3427
Need help with your installation?
sales@superatv.com
1-855-743-3427
www.superatv.com
8:00am – 8:00pm EST M-Th 8:00am – 7:00pm EST Friday 9:00am – 2:00pm EST
Saturday
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>