VISUAL COMFORT CD 4004 Fondant 8 Inch Flush Mount Instruction Manual
- June 13, 2024
- VISUAL COMFORT
Table of Contents
VISUAL COMFORT CD 4004 Fondant 8 Inch Flush Mount
Product Information
- Product Name: Fondant 8 Flush Mount
- Item Number: CD 4004
- Manufacturer: [Manufacturer Name]
- Product Type: Light Fixture
Product Usage Instructions
- Carefully remove all parts from the box and place them on a clean, soft surface.
- Remove the mounting plate (A) from the fixture (E) by unscrewing the screws (D).
- Install the mounting plate (A) to the junction box and secure it with the provided mounting screws (B).
- Connect the supply ground wire to the green ground screw on the mounting plate (A) and secure it. Refer to Diagram 1 for visual guidance.
- Note : It is important to ensure that the fixture is properly grounded.
- Connect the fixture neutral wire (white) to the supply neutral wire (usually white) using the wire nut (C).
- Connect the fixture hot wire (black) to the supply hot wire (usually black) using the wire nut (C).
- Caution: Do not reverse the hot and neutral connections.
- Ensure all wire connections are tight, then carefully tuck them into the junction box.
- Install the fixture (E) onto the mounting plate (A) and secure it with the screws (D).
Caution: This light fixture should be installed by all applicable, local installation codes, and by a person familiar with its construction and operation, as well as the associated hazards. If any damage or defect is found, do not install the fixture. Retain all packaging material until installation is complete and approved.
Care Instructions:
Clean the light fixture only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.
Important: This product is listed and certified for use in the United
States.
Item # CD 4004
NOTICE:
This light fixture should be installed by all applicable, local installation codes, and by a person familiar with the construction and operation of it, as well as the hazards involved. Inspect item and contents carefully. If any damage or defect is found, do not install it. Retain all packaging material until installation is complete and approved.
TOOLS REQUIRED (NOT INCLUDED):
- Phillips Screwdriver
- Slotted Screwdriver
ASSEMBLY INSTRUCTIONS
-
Carefully remove all parts from the box. Place on a clean, soft surface.
-
Remove mounting plate (A) from fixture (E) by removing screws (D).
-
Install mounting plate (A) to the junction box and secure it with mounting screws (B).
-
Connect the supply ground wire to the green ground screw on the mounting plate (A) and secure it. (see diagram 1)
NOTE : The fixture must be grounded. -
Connect the fixture neutral wire (white) to the supply neutral wire (usually white) using wire nut (C).
-
Connect the fixture hot wire (black) to the supply hot wire (usually black) using wire nut (C).
CAUTION : Do not reverse the hot and neutral connections. -
Make sure all wire connections are tight, then carefully tuck into the junction box.
-
Install fixture (E) to mounting plate (A) and secure with screws (D).
FEATURES
Care Instructions
Clean only with a soft dry cloth or feather duster. Do Not use abrasive or chemical agents
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>