QAZQA 93271 Jeany SL Spotlight Instruction Manual

Table of Contents

QAZQA-93271-Jeany-SL-Spotlight-product

Product Information
The product is called Jeany SL and it is an electrical lighting fixture.

The product is available in different models:

Jeany SL 93271/93272 – Single round light fixture with 1 GU10 socket. Suitable for a halogen light source with a maximum power of 35W. Overall size: 80mm.
Jeany SL 2 Round 93273/93274 – Double round light fixture with 2 GU10 sockets. Suitable for halogen light sources with a maximum power of 35W. Overall size: 120mm.
Jeany SL 2 93275/93276 – Double light fixture with 2 GU10 sockets. Suitable for halogen light sources with a maximum power of 35W. Overall size: 255mm.
Jeany SL 3 Round 93277/93278 – Triple round light fixture with 3 GU10 sockets. Suitable for halogen light sources with a maximum power of 35W. Overall size: 120mm.
Jeany SL 3 Curl 93279/93280 – Triple curl-shaped light fixture with 3 GU10 sockets. Suitable for halogen light sources with a maximum power of 35W. Overall size: 250mm.
Jeany SL 4 93281/93282 – Quadruple light fixture with 4 GU10 sockets. Suitable for halogen light sources with a maximum power of 35W. Overall size: 625mm.

Manufacturer Information

FittinQ B.V. – Smaragdweg 52, 5527 LB Hapert, The Netherlands. Website: www.qazqa.nl
FittinQ LTD – 55 Baker Street, London, W1U 7EU United Kingdom

Product Usage Instructions

Choose the appropriate Jeany SL model based on your requirements.
Ensure that the input voltage of your electrical supply matches the specified input voltage (220-240V~ 50Hz).
For each light fixture, select a suitable GU10 halogen light source with a maximum power of 35W.
When replacing a halogen lamp, make sure to wait for it to cool down for a minimum of 5 minutes to avoid burns.
Install the light fixture securely at the desired location.
Connect the light fixture to the electrical supply following standard wiring practices.
Switch on the electrical supply to illuminate the Jeany SL light fixture.

QAZQA-93271-Jeany-SL-Spotlight-fig-1

Jeany SL

QAZQA-93271-Jeany-SL-Spotlight-fig-2

QAZQA-93271-Jeany-SL-Spotlight-fig-3

Please study the instruction manual and the below information carefully before installing or using this product.

Please keep this user manual for further reference

The luminaires may only be installed by authorized and qualified technicians according to the valid regulations for electrical installation.
Maintenance of the luminaires is limited to their surfaces. During maintenance, no moisture can come into contact with any areas of the terminal connections or voltage control parts.
The electrical supply must be switched off at the outset, preferably by means of a switch in the distribution box, before any installation, maintenance or repair work is undertaken.
Exterior lighting must not be installed during rain.
Take account of the minimal separation distance from other objects and the room required around the fitting.
If in any doubt, consult a professional, taking local installation requirements into account. Some countries stipulate that lighting may be installed only by registered installers.
Clamping screws in electrical connections must be adequately tightened. This is particularly the case with 12V low-voltage conductors.
Clean with a clean, dry cloth or brush, use no solvents or abrasives.
Avoid dampness on all electrical components Take account of all available technical information.
Meaning of symbols:
This luminaire cannot be disposed of together with normal domestic waste in standard rubbish can, but you have to bring it to a staging area for electrical wasteTake note of the symbols when connecting wires: