Wings Vibe True Wireless Earbuds User Manual
- June 13, 2024
- WINGS
Table of Contents
- Wings Vibe True Wireless Earbuds User Manual
- Introduction
- FEEL IT! FLAUNT IT!
- What’s In The Box
- How To Pair
- Single Earbud Usage
- Touch Control Usages
- Call Control
- Charging Function
- Technical Specifications
- Safety And Maintenance
- DOWNLOAD
- Wings Vibe True Wireless Earbuds User Manual – []
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Wings Vibe True Wireless Earbuds User Manual
Introduction
Welcome to the Wings True Wireless Generation with the all new Wings Vibe. We
hope you are as excited as us to feel and flaunt your latest soundwear.
But before you dive right in, we strongly recommend going through this user
manual thoroughly as it contains important technical information to ensure you
have a seamless audio experience with us. Once you are done reading the
manual, we are sure you will be all set to.
FEEL IT! FLAUNT IT!
What’s In The Box
- 2 x Bluetooth Earbuds
- 1 x User Manual
- 1 x Portable Charging Case
- 1 x Type-C Charging Cable
- 8 x Ear Cushion
How To Pair
Step 1: Open the lid of the charging case. The earbuds will automatically power on.
Step 2: Both earbuds will auto-pair with each other and enter pairing mode.
Step 3: Turn on the Bluetooth on your mobile and pair with device name “Wings Vibe”.
Step 4: Congratulations! You are now connected and re stunt playing m.d:rt
Note: There. is no master earbud mnd ;toy or= –ifvd can be Mix!” ward first and connected with your mobile.
Single Earbud Usage
Step 1: Take out any one earbud from the charging case.
Step 2: It will automatically power on and enter pairing mode.
Step 3: Turn on the Bluetooth on your mobile and pair with device name “Wings Vibe”.
Step 4: Congratulations! You are now connected and can start playing media.
Note: During mono mode usage, at any time, you can take out the other earbud also and it will autoconnect and move into dual mode.
Touch Control Usages
Play/Pause: Double touch on right or left earbud to play/pause.
Changing Songs: Touch and hold right parted for about 2 seconds to skip to next song. Touch and hold left earbud for about 2 seconds to go to previous song.
Adjusting Volume: Touch the right earbud once to increase the volume. Touch the left earbud once to decrease the volume.
Siri/Google Assistant: Triple touch on right or left earbud to activate voice assistant.
Call Control
Answer incoming Call: Double touch on right or left earbud to answer .11. Reject Incoming Call: Touch and hold right or left earbud for 2 seconds to reject an incoming .11. Haw Up After Call: Double touch the left or right earbud to hang up after call.
Charging Function
Charging the Earbuds: Place the earbuds back Into the charging case. Please make sure to close the lid of the case after which earbuds will start charging.
Charging the Case: Take the Type-C charging cable. Plugin the Type-C end into the charging case and the other end into a plug point/laptop/powerbank.
Charging Level Indicators: When left and right earbuds red LED lights up it indictates under charging. When left and right earbuds red LED turns off it indicates fully charged. The centre LED light show the case batten,’ level as follows:
- 0-2596: 1d White LED blinking.
- 25-50%:
- LED lights up,
- LED blinking.
- 50-75.:
- LED lights up,
- LED blinking.
- 75-99,6::14, 2.
- LED lights up,
- LED blinking.
- 100%: Fully charged, all four LEDs lights up permanently.
Note: Please do not use more than 5SI output plug points to charge as it can cause damage to the case and will affect battery life.
Technical Specifications
- Biuetooth Version: V5.0
- Bluetooth Profile: HSP, HFP, A2DP, AVRCP
- Frequency: 20Hz-20000Hz
- Charge Jack: Type C
- Charging Time: 2 hours
- Music Play Time: About 6 hours
- Maximum Power Transmitted:0.01 ibs (5.0g)x 2
- Output Power RMS: Total 6 mW( 3mWi-3mW)
- Rated Input Voltage: DC 5 V, 310 mA
- Frequency bands: 2.402 Ghz – 2.480 Ghz
Safety And Maintenance
Please read below suggestions in order to helping prolong the product lifespan and clearly understand the warranty clauses:
- Keep the product dry, do not put it in humid conditions to avoid short circuit
- Do not expose it to the peak sun or high heat for extended period of time as this will short lifespan of electronic components. damage battery and deform some plastic parts.
- Do not put it in cold circumstance to avoid damage to PCB board.
- Do not attempt to dismantle the product, as It maybe unsafe especially for non-professionals.
- Do not use chemical products, detergent, oily liquids to clean the item.
- Do not scratch the surface with sharp Items to avoid damaging the case and appearance.
- Do not char, the case for more than 5 hours to avoid loss In battery life.
- Avoid hearing music at maximum volume for long periods of time as this can affect your hearing and Is not advisable.
Note: Any damage to the product that is not manufa-cturing defect will lead to warranty being rendered null and void. Therefore, please take utmost care of your product.