Zoroufy 2023 Grand Regency Wall Hanger Collection Instruction Manual
- June 13, 2024
- Zoroufy
Table of Contents
Zoroufy 2023 Grand Regency Wall Hanger Collection
Product Information
The Finial Pineapple Ball Urn is a decorative accessory designed to be attached to a wall. It is made of lacquer-coated materials to resist tarnishing and maintain its appearance. The product comes with various components, including a rod, end support brackets, center support brackets, clips, and a disc for securing rugs, tapestries, or quilts.
Specifications
- Rod Gauge Rod Diameter: .031″
- Wall Hanger Collection Length: 3/2/2/.031/.5”
Product Usage Instructions
- Attach the finial by inserting the rod into the finial base and tightening the small screw.
- Slide the first end support bracket onto the rod. Hold the rod in the desired position against the wall and mark the position of the holes in the attached end support bracket.
- While supporting the opposite side, install the attached end support bracket.
- Slide the remaining support brackets onto the rod and locate the desired position by leveling the rod. Install the second end support bracket on the opposite end.
- Install the center support bracket(s) evenly between the end support brackets.
- Attach the clips to the rug, tapestry, or quilt and secure in place by tightening the disc. Place the clips over the rod.
- If bracket screws are not installed into a stud, wall anchors must be used.
Note: Periodically check and tighten all screws and hardware. Do not use brass cleaner or other abrasives to clean the product. Simply wipe it with a soft dry cloth to maintain its appearance.
INSTALLATION INSTRUCTIONS
- Attach the finial by inserting the rod into the finial base and tightening the small scew.
- Slide the first end support bracket onto the rod. Hold the rod in the desired position against wall and mark the position of the holes in the attached end support bracket.
- While supporting the opposite side, install the attached end support bracket.
- Slide the remaining support brackets onto the rod and locate the desired position by leveling the rod. Install the second end support bracket on the opposite end.
- Install the center support bracket(s) evenly between the end support brackets.
- Attach the clips to the rug, tapestry, or quilt and secure in place by tightening the disc. Place the clips over the rod.
Wall anchors must be used if bracket screws are not installed into a stud.
ALL PARTS ARE LACQUER COATED TO RESIST TARNISHING. DO NOT USE BRASS CLEANER OR OTHER ABRASIVES. TO CLEAN, SIMPLY WIPE WITH A SOFT DRY CLOTH. PERIODICALLY CHECK AND TIGHTEN ALL SCREWS AND HARDWARE.
2140 W. GREENVIEW DR. SUITE 5, MIDDLETON, WI 53562-0345 • 800-762-1525 • info@zoroufy.com • www.zoroufy.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>