D-Link DWL-700AP 2.4GHz 802.11g Wireless Access Point Quick Installation Guide
- June 13, 2024
- D-Link
Table of Contents
D-Link DWL-700AP 2.4GHz 802.11g Wireless Access Point
Before You Begin
It’s best to use a computer (with an Ethernet adapter) that is connected to a switch for configuring the DWL-700AP. The default IP address for the DWL-700AP is 192.168.0.50 with a Subnet Mask of 255.255.255.0. You will need to assign your computer a Static IP address within the same range as the DWL-700AP’s IP address for the purpose of configuring the DWL-700AP. See the Manual on the CD-ROM if you need assistance in assigning a Static IP address for your network adapter.
Check Your Package Contents
If any of the above items are missing, please contact your reseller.
Connecting The DWL-700AP Wireless Ac-cess Point To Your Network
- A. First, connect the power adapter to the receptor at the back panel of the DWL-700AP and then plug the other end of the power adapter to a wall outlet or power strip. The Power LED will turn ON to indicate proper operation.
- B. Using a Ethernet cable, insert one end of the cable to the LAN port on the back panel of the DWL-700AP and the other end of the cable to a switch. Note: You also have the option of connecting the DWL-700AP directly to the computer that will be used for configuration. The Link LED light will illuminate to indicate a proper Ethernet connection.
- C. Computers with 802.11b wireless adapters such as the DWL-650 Air Wireless Cardbus Adapter and the DWL-520 Air Wireless PCI Adapter can connect to the DWL-700AP. By default, the DWL-700AP SSID is set to
‘default’ with a Channel setting of ‘6’.
Using The Setup Wizard
The logon pop-up screen will appear.
Once you have logged in, the Home screen will appear.
You will see the following screens.
Step 1 – Set up your new password. You have the option to establish a password.
Step 2 – Set Wireless LAN Connection. By default the DWL-700AP SSID is set to ‘default’ with a Channel setting of ‘6’.
Step 3 – Encryption
The DWL-700AP is capable of two levels of wireless encryption – 64-bit, and
128-bit. By default encryption is disabled. You can change the encryption
settings for more secure wireless communication.
Your Setup is Complete!
You will be returned to the Home tab. Please close all internet browser
windows.
When you have completed the steps in this Quick Installation Guide, your
connected network should look similar to this:
Connecting to the DWL-700AP
Using the Air Wireless Utillity included with the Air Adapters, you can browse
and connect to the DWL-700AP.
Warning: The MAC address of the DWL-700AP is listed on the product
sticker on the bottom of the unit.
The Link Info page of the Air utility will show the connection status between the DWL-700AP and Air wireless adapter.
FAQs
What is the D-Link DWL-700AP Wireless Access Point?
The D-Link DWL-700AP is a 2.4GHz 802.11g Wireless Access Point, designed to provide wireless connectivity to devices within its coverage area.
What wireless standards does the DWL-700AP support?
The DWL-700AP typically supports the 802.11g wireless standard, operating in the 2.4GHz frequency range.
What is the maximum wireless data transfer rate of the DWL-700AP?
The DWL-700AP offers a maximum wireless data transfer rate of up to 54 Mbps, suitable for basic wireless networking tasks.
Is the DWL-700AP suitable for home or business use?
The DWL-700AP is often used in small to medium-sized home or business networks to provide wireless connectivity to devices.
Does the DWL-700AP have multiple operating modes?
Yes, the DWL-700AP typically supports multiple operating modes, including Access Point (AP) mode and Wireless Client mode.
What security features does the DWL-700AP offer?
The DWL-700AP often provides security features such as WEP encryption, WPA/WPA2, MAC address filtering, and SSID broadcast control to secure your wireless network.
Is the DWL-700AP compatible with Power over Ethernet (PoE)?
The DWL-700AP may support Power over Ethernet (PoE) for convenient installation and power supply through an Ethernet cable.
What is the range or coverage area of the DWL-700AP?
The coverage area and range of the DWL-700AP can vary depending on factors such as antenna configuration and environmental conditions. It's typically suitable for small to medium-sized areas.
What types of antennas does the DWL-700AP use?
The DWL-700AP often features built-in or detachable dipole antennas, which can affect signal coverage and performance.
Can the DWL-700AP be managed and configured remotely?
Remote management and configuration options may be available for the DWL- 700AP, typically through a web-based interface.
What are the recommended operating conditions for the DWL-700AP?
The DWL-700AP operates best within specific temperature and humidity ranges, and it should be placed in a dry and well-ventilated location.
What is the warranty coverage for the D-Link DWL-700AP?
The D-Link DWL-700AP Wireless Access Point typically comes with a warranty of 5 years from the date of purchase.
References:D-Link DWL-700AP 2.4GHz 802.11g Wireless Access Point – Device.report
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>