D-Link DWL-700AP 2.4GHz 802.11g Wireless Access Point Specifications And Datasheet

D-Link DWL-700AP 2.4GHz 802.11g Wireless Access Point

Description

802.11b Wireless LAN Access Point
The D-Link Air DWL-700AP Access Point is designed to give 2.4GHz wireless LAN users low-cost yet secure access to an IEEE 802.11b wireless Local Area Network (LAN). This Access Point combines industry standards with versatile functions like repeater mode and enhanced IEEE 802.11i security features like WEP, TKIP, and AES to give you wireless LAN interoperability and functionality at an affordable price.

• Wireless Access
  The DWL-700AP Access Point connects the wireless LAN nodes (workstations, print servers, etc.) together via a 2.4GHz IEEE 802.11b wireless interface. It listens to all data traffic and maintains a dynamically updated MAC address database. When necessary, IP addresses are matched to MAC addresses and information is stored in the database as well. A 10/100Mbps Fast Ethernet port provides a bridge between a wireless network and a wired network. The DWL- 700AP converts data packets over a wired Ethernet LAN into radio signals to be used on the wireless network and vice versa.

• Built-in Repeater Function
  The DWL-700AP can be configured to operate in any one of the following modes: (1) as a wireless access point, (2) a wireless client or (3) a repeater. With these built-in functions, the DWL-700AP gives you the flexibility to configure the device to as an access point at home or the office with normal wireless operation range requirements, or as a repeater that connects 2 wireless networks together when the number of wireless users increases and spreads in a wider area.

• Network Security
  In the air, transmitted data can be easily intercepted if not well protected by a security scheme. The DWL-700AP provides the necessary security, using the enhanced 64/128-bit industry-standard WEP (Wired Equivalent Privacy) encryption protocol. It also provides IEEE 802.11i security features such as an embedded AES/TKIP security engine (hardware supported).

• Web-based & SNMP Configuration/Management
  The DWL-700AP can be configured and managed by HTTP (web-based configuration) or SNMP (SNMP v.2 support) through built-in MIBs. DHCP client and server are supported.

Key Features

• 802.11b 2.4GHz industry standard with wide range of wireless LAN interoperability
• 11Mbps data transfer rates
• 10/100Mbps auto-sensing Fast Ethernet port to bridge wireless LAN to Ethernet-based network
• Built-in repeater function
• Embedded AES/TKIP security engine
• SNMP v2 support
• Client access control via MAC address
• Configuration by HTTP and SNMP
• Management features: SNMP, HTTP, DHCP Server & Client

Technical Specifications

Standards

• IEEE 802.11b wireless LAN
• IEEE 802.3 10BASE-T Ethernet
• IEEE 802.3u 100BASE-TX Fast Ethernet

Wireless LAN to Ethernet Interface

• Through RJ-45 10/100Mbps Fast Ethernet port

Frequency Range

• 2.4GHz to 2.4835GHz

Modulation Techniques

• Direct Sequence Spread Spectrum (DSSS)

Data Rates

• 11 Mbps
• 5.5 Mbps
• 2 Mbps
• 1 Mbps
• Auto fall-back

Data Rate & Modulation Scheme

• 11Mbps: CCK
• 5.5Mbps: CCK
• 2Mbps: Barker
• 1Mbps: Barker

Operating Channels

• North America (FCC): 11
• Canada (DOC): 11
• Europe (ETSI): 13

Antenna

• Detachable 2dBi Gain antenna with reverse SMA connector

Receive Sensitivity

• @ <8%: -82 dBm (typical)

Transmit Output Power

• 18dBm (typical)

Operating Range

• Indoors: up to 100 m (328 feet) *
• Outdoors: up to 300 m (984 feet) *
• Environmental factors may adversely affect operating range

Operating Modes

• Access Point
• Wireless client
• Repeater

Security

• Data encryption: 64-bit, 128-bit WEP (Wired Equivalent Privacy)

Device Management

• Web-based through Internet Explorer v6 or later; Netscape Navigator v.6 or later; or other Java-enabled browsers
• DHCP Server and Client

Physical & Environmental

Power Input

• DC 5V, 2.0A
• Uses external AC power adapter

Dimensions

• 142 (L) x 109 (W) x 31 (H) mm
• (5.6 x 4.3 x 1.2 inches)

Weight

• 200 grams (0.44 lb.)

Operating Temperature

• o to 55o C (32o to 149o F)

Storing Temperature

• -20o to 75o C (4o to 167o F)

Humidity

• Up to 95%, non-condensing

Emission

• FCC Class B
• CE Class B

Box Includes

• DWL-700AP Wireless Access Point
• User s Manual on CD
• Quick Installation Guide
• 1.8 m Cat. 5 Ethernet straight-through cable
• Power Adapter
  

Ordering Information

DWL-700AP: 802.11b Wireless LAN Access Point

Please specify your order as follows:

• DWL-700AP/ENA: EU standard power adapter, North America frequency

Support

U.S.A

• TEL: 1-949-788-0805
• FAX: 1-949-753-7033

Trademark
Specifications are subject to change without prior notice. D-Link is a registered trademark and D-LinkAir is a trademark of D-Link Corporation/D-Link System Inc. All other trademarks belong to their proprietors.

FAQs

What is the D-Link DWL-700AP Wireless Access Point?

The D-Link DWL-700AP is a 2.4GHz 802.11g Wireless Access Point, designed to provide wireless connectivity to devices within its coverage area.

What wireless standards does the DWL-700AP support?

The DWL-700AP typically supports the 802.11g wireless standard, operating in the 2.4GHz frequency range.

What is the maximum wireless data transfer rate of the DWL-700AP?

The DWL-700AP offers a maximum wireless data transfer rate of up to 54 Mbps, suitable for basic wireless networking tasks.

Is the DWL-700AP suitable for home or business use?

The DWL-700AP is often used in small to medium-sized home or business networks to provide wireless connectivity to devices.

Does the DWL-700AP have multiple operating modes?

Yes, the DWL-700AP typically supports multiple operating modes, including Access Point (AP) mode and Wireless Client mode.

What security features does the DWL-700AP offer?

The DWL-700AP often provides security features such as WEP encryption, WPA/WPA2, MAC address filtering, and SSID broadcast control to secure your wireless network.

Is the DWL-700AP compatible with Power over Ethernet (PoE)?

The DWL-700AP may support Power over Ethernet (PoE) for convenient installation and power supply through an Ethernet cable.

What is the range or coverage area of the DWL-700AP?

The coverage area and range of the DWL-700AP can vary depending on factors such as antenna configuration and environmental conditions. It's typically suitable for small to medium-sized areas.

What types of antennas does the DWL-700AP use?

The DWL-700AP often features built-in or detachable dipole antennas, which can affect signal coverage and performance.

Can the DWL-700AP be managed and configured remotely?

Remote management and configuration options may be available for the DWL- 700AP, typically through a web-based interface.

What are the recommended operating conditions for the DWL-700AP?

The DWL-700AP operates best within specific temperature and humidity ranges, and it should be placed in a dry and well-ventilated location.

What is the warranty coverage for the D-Link DWL-700AP?

The D-Link DWL-700AP Wireless Access Point typically comes with a warranty of 5 years from the date of purchase.

References:D-Link DWL-700AP 2.4GHz 802.11g Wireless Access Point – Device.report

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>