INNOVA 13-003 Mini Amp Kit Instruction Manual
- June 13, 2024
- InnOVA
Table of Contents
INNOVA 13-003 Mini Amp Kit
Product Information
- Product Name: Mini Amp Kit
- Model Number: 13-003
- Included in the package:
- Mini Amp with built-in Bluetooth
- Speakers
- Speaker Wires
- Tools needed for installation:
- Phillips Screwdriver
- Wire Stripper
- Crimp Tool
Professional installation is recommended. If you choose to install the product yourself, exercise caution, care, and patience during the installation process. Make sure to follow the instructions carefully.
Product Usage Instructions
- Ensure your cart’s TOW/RUN switch is in the tow position.
- Decide where you want to mount the mini amp. Note: Do not mount it in the battery box.
- The mini amp needs to be powered by a switch and is not designed to stay on constantly. We recommend using a DC to DC converter for this purpose.
- Note: For gas carts, make sure to connect the power wire to the switched side of the keyswitch.
- To pair your device with the Bluetooth receiver, follow these steps:
- Turn on your device and search for the Bluetooth signal.
- Once your device finds the Bluetooth receiver, it will prompt you for a pairing code. Enter “0000”.
- You only need to perform this pairing process once.
- Installation is now complete.
INCLUDE
- Mini Amp w/built-in
- Bluetooth
- Speakers
- Speaker Wires
Tools needed:
- Phillips Screw Driver
- Wire Stripper
- Crimp Tool
Installation instructions
Professional installation is recommended. If you choose to not have this product installed by a professional, we highly recommend that you exercise caution, care, and patience when installing this product.
-
Make sure your cart’s TOW/RUN switch is in the tow position.
-
Locate where you would like to mount your mini amp.
Note: Do not mount in battery box. -
The Mini amp needs to be powered by a switch, it is not designed to stay on constant. We recommend using a DC to DC converter to achieve this.
NOTE: FOR GAS CARTS ENSURE YOU HOOK POWER WIRE TO THE SWITCHED SIDE OF THE KEYSWITCH
(Blue Tooth)
You will need to pair your devise with the blue tooth receiver. Turn on your
devise and search for the signal. Once your devise has found the blue tooth
receiver it will ask for a pairing code. That code is “0000”. You will only
need to do this once.