HOMMIX Vega 3 Way Tap Triflow Filter Tap Instruction Manual

June 13, 2024
HOMMIX

HOMMIX-logo

HOMMIX Vega 3 Way Tap Triflow Filter Tap

Product Information

  • Product Name: Hommix Vega 3-Way Tap
  • Specifications:
    • Ceramic valve cartridge
    • Flow rate: 2.2G/M base on 0.5Mpa
    • 1/4 Connector for filtered water tube
    • 2 x G-1/2 Flexible Hoses
  • Installation Tools: 1 lock bolt, 1 rubber gasket, 1 metal gasket, 1 lock nut, 2 fixing screws, 1 set filtered water pipe with plastic adapter, 2 hot and cold 600mm hoses
  • Parts:
1. Mixer Water Aerator
2. Filter Water Aerator
3. Spout Assembly
4. Spout Assembly Lock Cover
5. Lock Ring
6. Filter Water Level Set
7. Filter Water Cartridge
8. Faucet Body
9. Mixer Water Cartridge
10. Cartridge Lock
11. Mixer Water Cartridge Cover
12. Mixer Water Level Set
13. Faucet Body Base
14. Faucet Locked Set

Product Usage Instructions

  1. Attach the lock bolt to the tap.
  2. Attach the filter water hose.
  3. Attach the hot and cold hoses.
  4. Insert the tap with the tubes attached through the hole and attach the rubber gasket, metal gasket, and lock nut to the lock bolt.
  5. Attach the tube from the filtration system/hard water to the push fit. Attach the fitting to the pipe if it’s not already attached.
  6. Connect the hot and cold hoses to the supply water. Lock the filter water pipe by plastic adapter.
  7. Test your Hommix Verona to ensure it is dispensing water.

Important Note: Before fixing the tap, ensure any sand, silt, rubble, or debris that may block the valve cartridge and aerator is removed and cleaned. Clean the water pipes if necessary before connecting the hoses to the hot and cold.

Taking care of your tap:

  • DO NOTs:
    • DO NOT use cleaning products, chemicals, or any other types of substances to clean the tap.
    • DO NOT use organic solvents or acidic cleaners, lime-scale removers, household vinegar, or cleaners containing acetic acid for cleaning.
    • DO NOT use any sort of brushes or abrasive sponges and scrubs.
  • DOs:
    • DO dry the tap after washing up with a dry soft cloth (we advise this for cleaning your sink too).
    • DO use a soft damp cloth followed by a dry soft cloth to clean if the tap requires cleaning.

Installation Instructions

Hommix Vega
Three Way Kitchen Tap

Specifications

  1. Ceramic valve cartridge
  2. Flow rate: 2.2G/M base on 0.5Mpa
  3. 1/4″ Connector for filtered water tube
  4. 2 x G-1/2″ Flexible Hoses

Installation Tools

  • Adjustable Spanner / Monkey Wrench
  • PTFE tape
  • 2.5mm Allen key

Accessories

  1. 1 Pc lock bolt
  2. 1 pc rubber gasket
  3. 1 Pc metal gasket
  4. 1 Pc lock nut
  5. 2 Pcs of fixing screws
  6. 1 set filtered water pipe and a plastic adapter (1/4″ push fit)
  7. 2 Pcs hot and cold 600mm hoses

Parts

  1. Mixer Water Aerator
  2. Filter Water Aerator
  3. Spout Assembly
  4. Spout Assembly Lock Cover
  5. Lock Ring
  6. Ø28×2.5 O-ring x 2
  7. Ø14×2.3 O-ring x 2
  8. Filter Water Level Set
  9. Filter Water Cartridge
  10. Faucet Body
  11. Mixer Water Cartridge
  12.  Cartridge Lock
  13. Mixer Water Cartridge Cover
  14.  Mixer Water Level set
  15. Faucet Body Base
  16. Faucet Body O-ring Ø47×3
  17. Faucet Locked Set
  18. 1 Pc lock bolt.
  19. 1pc rubber gasket.
  20. 1Pc metal gasket.
  21.  1Pc lock nut.
  22. 2Pcs Fixed screw.
  23. 1sets filter water pipe and a plastic adapter.
  24. 2Pcs hot and cold hoses.

Profile Drawing

HOMMIX-Vega-3-Way-Tap-Triflow-Filter-Tap-01 \(6\)

  1. Important Note 1
    You do not need to drill any holes, the illustration below demonstrate measurements of the lock nut screws

  2. Important Note 2
    Please ensure the tap hoses are attached to the correct positions as marked below.
    HOMMIX-Vega-3-Way-Tap-Triflow-Filter-Tap-01 \(7\)

  • Step: 1
    Attach the lock bolt to the tap

  • Step: 2
    Attach the filter water hoseHOMMIX-Vega-3-Way-Tap-Triflow-Filter-Tap-01
\(8\)

  • Step: 3
    Attach the Hot and Cold hoses

  • Step: 4
    Insert the tap with the tubes attached through the hole and attach the rubber gasket, metal gasket and lock nut to the lock boltHOMMIX-Vega-3-Way-Tap-
Triflow-Filter-Tap-01 \(9\)

  • Step: 5HOMMIX-Vega-3-Way-Tap-Triflow-Filter-Tap-01 \(10\)

  • Step: 7
    Connect the Hot & Cold Hoses to the supply water

  • Step: 8
    Test the your Hommix Verona to ensure it is dispensing waterHOMMIX-Vega-3
-Way-Tap-Triflow-Filter-Tap-01 \(12\)

Important Note 3
Please ensure any sand, silt, rubbles or anything that may block the valve cartridge and aerator is removed and cleaned before fixing the tap. During construction, the water pipes often end up with these, please ensure it is cleaned before connecting the hoses to the hot and cold.

Illustration of a Reverse Osmosis System connected to the Hommix Vega 3-Way Tap

HOMMIX-Vega-3-Way-Tap-Triflow-Filter-Tap-01 \(14\)

Taking care of your tap

  • Your Hommix Verona 3-Way Tap requires minimal care and maintenance but here are a few tips:
  • DON’Ts
    • DON’T use cleaning products, chemicals or any other types of substances to clean the tap
    • DON’T use organic solvents or acidic cleaners, lime-scale removers, household vinegar or cleaners containing acetic acid for cleaning
    • DON’T use any sort of brushes or abrasive sponges and scrubs
  • DOs
    • DO dry the tap after washing up with a dry soft cloth (we advise this for cleaning your sink too)
    • DO use a soft damp cloth followed by a dry soft cloth to clean if the tap requires cleaning

That’s all! We did say minimal care and maintenance.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

HOMMIX User Manuals

Related Manuals