HOMMIX DG-B3302 Verona Brushed Brass 3-Way Tap Instruction Manual

DG-B3302 Verona Brushed Brass 3-Way Tap
Instruction Manual

Hommix Verona 3-Way Tap

DG-B3302 Verona Brushed Brass 3-Way Tap

Installation Instructions

Hommix Verona
Three Way Kitchen Tap

Specifications

1. Ceramic valve cartridge
2. Flow rate: 2.2G/M base on 0.5Mpa
3. 1/4″ Connector for filtered water tube
4. 2 x G-1/2″ Flexible Hoses

Installation Tools

• Adjustable Spanner / Monkey Wrench
• PTFE tape
• 2.5mm Allen key

Accessories

1. 1 Pc lock bolt
2.  1 pc rubber gasket
3. 1 Pc metal gasket
4. 1 Pc lock nut
5. 2 Pcs of fixing screws
6. 1 set filtered water pipe and a plastic adapter (1/4″ push fit)
7. 2 Pcs hot and cold 600mm hoses

Replacement Parts

1. Aerator Set
   1.1. Aerator Holder
   1.2. Aerator

2.  Spout Assembly

3. Ø22×2.5 O-ring x 2

4. Ø14×2.3 O-ring x 2

5. Spout Assembly Lock Cover

6. Lock Ring

7. Filter Water Lever Set

8.  Filter Water Ceramic Cartridge

9. Faucet Body

10. Mixer Water Ceramic Cartridge

11. Cartridge Lock

12. Mixer Water Cartridge Cover

13. Mixer Water Level set

14. Faucet Body Base

15. Faucet Body Base O-ring Ø47×3

16. Mixer Water Hose(Maybe not included )

17. Lock Accessories
    17.1. 1 Pc lock bolt
    17.2. 1 pc rubber gasket
    17.3. 1 Pc metal gasket
    17.4. 1 Pc lock nut
    17.5. 2 Pcs of Fixing screws
    17.6. 1 set filter water hose and adapter (push fit)

Profile Drawing

Important Note 1
You do not need to drill any holes, the illustration below demonstrate measurements of the lock nut screws

Important Note 2
Please ensure the tap hoses are attached to the correct positions as marked below.

Step: 1
Attach the lock bolt to the tap

Step: 2
Attach the filter water hose

Step: 3
Attach the Hot and Cold hoses![HOMMIX DG B3302 Verona Brushed Brass 3 Way Tap

• Cold hoses](https://manuals.plus/wp-content/uploads/2023/08/HOMMIX-DG-B3302 -Verona-Brushed-Brass-3-Way-Tap-Cold-hoses.png)

Step: 4
Insert the tap with the tubes attached through the hole and attach the rubber gasket, metal gasket and lock nut to the lock bolt

Step: 7
Connect the Hot & Cold Hoses to the supply water Step: 8
Test the your Hommix Verona to ensure it is dispensing water

Important Note 3
Please ensure any sand, silt, rubbles or anything that may block the valve cartridge and aerator is removed and cleaned before fixing the tap. During construction, the water pipes often end up with these, please ensure it is cleaned before  connecting the hoses to the hot and cold.
Illustration of a Reverse Osmosis System connected to the Hommix Verona 3-Way Tap

|

Taking care of your tap
Your Hommix Verona 3-Way Tap requires minimal care and maintenance but here are a few tips:
DON’Ts
DON’T use cleaning products, chemicals or any other types of substances to clean the tap
DON’T use organic solvents or acidic cleaners, lime-scale removers, household vinegar or cleaners containing acetic acid for cleaning
DON’T use any sort of brushes or abrasive sponges and scrubs
DOs
DO dry the tap after washing up with a dry soft cloth (we advise this for cleaning your sink too)
DO use a soft damp cloth followed by a dry soft cloth to clean if the tap requires cleaning
That’s all! We did say minimal care and maintenance. If you have any questions or need help with installation, please do not hesitate to contact us.
Live Chat – https://www.hommix.co.uk
Call us – 0330 113 9292
Email us – [email protected]

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>