HOMMIX DG-S3301 Sasani Brushed 304 Stainless Steel 3-Way Tap Instruction Manual

DG-S3301 Sesani Brushed 304 Stainless Steel 3-Way Tap
Instruction Manual

Hommix Sesani 3-Way Tap

DG-S3301 Sesani Brushed 304 Stainless Steel 3-Way Tap

Installation Instructions

Hommix Sesani
Three Way Kitchen Tap

Specifications

1. Ceramic valve cartridge
2.  Flow rate: 2.2G/M base on 0.5Mpa
3.  1/4″ Connector for filtered water tube
4. 2 x G-1/2″ Flexible Hoses
5. G-3/8 or G-1/2 Hose pipe connector as required

Installation Tools

• Adjustable Spanner / Monkey Wrench
• PTFE tape
• 2.5mm Allen key

Accessories

1. 1 Pc lock bolt
2. 1 pc rubber gasket
3. 1 Pc metal gasket
4. 1 Pc lock nut
5. 2 Pcs of fixing screws
6. 1 set filtered water pipe and a plastic adapter (1/4″ push fit)
7. 2 Pcs hot and cold 600mm hoses

Parts

1. Mixer Water Aerator
2. Filter Water Aerator
3. Spout Assembly
4. Spout Assembly Lock Ring set
5. Ø23×3 O-ring x 2
6. Ø14×2 O-ring x 2
7. Filter Water Level Set
8. Filter Water Ceramic Cartridge 9. Faucet Body
9. Mixer Water Ceramic Cartridge
10. Cartridge Lock
11. Mixer Water Cartridge Cover
12. Mixer Water Level set
13. Faucet Body Base
14. Faucet Base O-ring Ø42×2.5
15. Mixer Water Hose (May Not Be Included)
    17-1. 1 Pc lock bolt.
    17. Faucet Accessories
    17-2. 1pc rubber gasket.
    17-3. 1Pc metal gasket.
    17-4. 1Pc lock nut.
    17-5. 2Pcs Fixed screw.
    17-6. 1 set of filter water pipe and a plastic adapter.

Profile Drawing

Important Note 1
You do not need to drill any holes, the illustration below demonstrate measurements of the lock nut screws

Important Note 2
Please ensure the tap hoses are attached to the correct positions as marked below.

Step: 1
Attach the lock bolt to the tap
Step: 2
Attach the filter water hose

Step: 3
Attach the Hot and Cold hoses

Step: 4
Insert the tap with the tubes attached through the hole and attach the rubber gasket, metal gasket and lock nut to the lock bolt

Step: 5

Step: 6

Step: 7
Connect the Hot & Cold Hoses to the supply water

Step: 8
Test the your Hommix Sesani to ensure it is dispensing water

Important Note 3
Please ensure any sand, silt, rubbles or anything that may block the valve cartridge and aerator is removed and cleaned before fixing the tap. During construction, the water pipes often end up with these, please ensure it is cleaned before connecting the hoses to the hot and cold.
Illustration of a Reverse Osmosis System connected to the Hommix Sesani 3-Way Tap

Information 1

Information 2

Please Note:
The filter lever is on the right hand side of the tap.
Taking care of your tap
Your Hommix Verona 3-Way Tap requires minimal care and maintenance but here are a few tips:
DON’Ts
DON’T use cleaning products, chemicals or any other types of substances to clean the tap
DON’T use organic solvents or acidic cleaners, lime-scale removers, household vinegar or cleaners containing acetic acid for cleaning
DON’T use any sort of brushes or abrasive sponges and scrubs
DOs
DO dry the tap after washing up with a dry soft cloth (we advise this for cleaning your sink too)
DO use a soft damp cloth followed by a dry soft cloth to clean if the tap requires cleaning
That’s all! We did say minimal care and maintenance. If you have any questions or need help with installation, please do not hesitate to contact us.
Live Chat – https://www.hommix.co.uk
Call us – 0330 113 9292
Email us – info@hommix.co.uk

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>