HOMMIX Olaf 3 Way Tap Triflow Filter Tap Instruction Manual
- June 13, 2024
- HOMMIX
Table of Contents
HOMMIX Olaf 3 Way Tap Triflow Filter Tap
Hommix Olaf Three-Way Kitchen Tap
Specifications
1. Ceramic valve cartridge
2. Flow rate: 2.2G/M base on 0.5Mpa
3. 1/4 Connector for filtered water tube
4. 2 x G-1/2 Flexible Hoses
Installation Tools
- 1 PC lock bolt
Accessories
- 1 Pc rubber gasket
- 1 Pc metal gasket
- 1 PC lock nut
- 2 Pcs of fixing screws
- 1 set filtered water pipe and a plastic adapter (1/4 push fit)
- 2 Pcs hot and cold 600mm hoses
Product Usage Instructions
Step 1: Attach the lock bolt to the tap
Use the provided lock bolt to attach the tap securely.
Step 2: Attach the filter water hose
Connect the filter water hose to the designated connector on the tap.
Step 3: Attach the Hot and Cold hoses
Connect the hot and cold hoses to their respective connectors on the tap.
Step 4:
Insert the tap with the tubes attached through the hole and attach the rubber
gasket, metal gasket, and lock nut to the lock bolt
- Insert the tap through the designated hole and secure it with the rubber gasket, metal gasket, and lock nut.
Step 5: Attach the tube from the filtration system/hard water to the push-
fit
Connect the tube from the filtration system or hard water source to the push-
fit connector on the tap.
Step 6: Attach the fitting to the pipe if it’s not already attached
If the fitting is not already attached to the pipe, connect it securely.
Step 7: Connect the Hot & Cold Hoses to the supply water
Connect the hot and cold hoses to the supply water lines.
Step 8: Test your Hommix Verona to ensure it is dispensing water
Turn on the water supply and check if the tap is dispensing water properly.
Taking care of your tap
Your Hommix Verona 3-Way Tap requires minimal care and maintenance, but here
are a few tips:
DOs
- Dry the tap after washing up with a dry soft cloth (we advise this for cleaning your sink too)
- Use a soft damp cloth followed by a dry soft cloth to clean if the tap requires cleaning
DON’Ts
- Use cleaning products, chemicals, or any other types of substances to clean the tap
- Use organic solvents or acidic cleaners, lime-scale removers, household vinegar, or cleaners containing acetic acid for cleaning
- Use any sort of brushes or abrasive sponges and scrubs
If you have any questions or need help with installation, please do not hesitate to contact us.
- Call us – 0330 113 9292
- Email us – info@hommix.co.uk.
Specifications
- Ceramic valve cartridge
- Flow rate: 2.2G/M base on 0.5Mpa
- 1/4″ Connector for filtered water tube
- 2 x G-1/2″ Flexible Hoses
Installation Tools
- Adjustable Spanner/Monkey Wrench 2.5mm Allen key
Accessories
- 1 Pc lock bolt
- 1 pc rubber gasket
- 1 Pc metal gasket
- 1 Pc lock nut
- 2 Pcs of fixing screws
- 1 set filtered water pipe and a plastic adapter (1/4″ push fit)
- 2 Pcs hot and cold 600mm hoses
Parts List
- Mixer water spout tip
- Mixer water integrated aerator
- Spout Assembly
- Spout/Faucet Body
- Rubber ring
- Locking ring
- Ø22×2.5 O-ring x 2 & Ø14×2.3 Oring x 2
- Faucet body locking ring
- Filter water lever set
- Filter water cartridge set
- Spout body locking nut
- Faucet body 304 SS
- Mixer water cartridge
- Mixer water cartridge lock
- Mixer water lever set
- Mixer water cartridge cover
- Faucet body base O-ring Ø54×3
- Locking set with filter water tube
- Mixer water hose (May not be included)
Profile Drawing
Installation Instruction
Important Note 1
You do not need to drill any holes, the illustration below demonstrates
measurements of the lock nut screws
Important Note 2
Please ensure the tap hoses are attached to the correct positions as marked
below.
- F- Filter Water
- C- Cold Water
- H- Hot Water
Step: 1
Attach the lock bolt to the tap
Step: 2
Attach the filter water hose
Step: 3
Attach the Hot and Cold hoses
Step: 4
Insert the tap with the tubes attached through the hole and attach the rubber
gasket, metal gasket, and lock nut to the lock bolt
Step: 5
Step: 6
Step: 7
Connect the Hot & Cold Hoses to the supply water
Step: 8
Test your Hommix Verona to ensure it is dispensing water
Important Note 3
Please ensure any sand, silt, rubbles, or anything that may block the valve
cartridge and aerator is removed and cleaned before fixing the tap. During
construction, the water pipes often end up with these, please ensure it is
cleaned before connecting the hoses to the hot and cold.
Information 1
Information 2
Taking care of your tap
Your Hommix Verona 3-Way Tap requires minimal care and maintenance but here are a few tips:
DON’Ts
- DON’T use cleaning products, chemicals, or any other types of substances to clean the tap
- DON’T use organic solvents or acidic cleaners, lime-scale removers, household vinegar, or cleaners containing acetic acid for cleaning
- DON’T use any sort of brushes or abrasive sponges and scrubs
DOs
- DO dry the tap after washing up with a dry soft cloth (we advise this for cleaning your sink too)
- DO use a soft damp cloth followed by a dry soft cloth to clean if the tap requires cleaning
- That’s all! We did say minimal care and maintenance. If you have any questions or need help with installation, please do not hesitate to contact us.
Contact Information
- Live Chat – https://www.hommix.co.uk.
- Call us – 0330 113 9292
- Email us – info@hommix.co.uk.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>