brother HL-L3280CDW Wireless Printer User Guide
- June 13, 2024
- Brother
Table of Contents
- brother HL-L3280CDW Wireless Printer User Guide
- brother HL-L3280CDW Wireless Printer User Guide
- NOTE:
- Unpack the machine and check the components
- Waste Toner Box Belt Unit
- Remove the packing materials and re-install the toner cartridge and drum
- Load paper in the paper tray
- NOTE:
- Select your language (if needed)
- Connect your computer or mobile device to your machine
- Manual wireless setup (Wireless models)
- For LCD models
- Read More About This Manual & Download PDF:
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
brother HL-L3280CDW Wireless Printer User Guide
brother HL-L3280CDW Wireless Printer User Guide
HL-L3215CW I HL-L3220CW / HL-L3220CWE / HL-L3220CDW / HL-L3240CDW / HL-
L3280CDW HL-L8230CDW / HL-L8240CDW
Read the Product Safely Guide first. then read this Quick Setup Guide for the
correct installation procedure. Not all models are available in all countries.
NOTE:
-
The components included in the box may differ depending on your
-
The available connection interfaces vary depending on the model. You must purchase the correct interface cable if you require one
-
USB cable
We recommend using a USB 2.0 cable (Type A/B) that is no more
Toner Cartridge and Drum Unit Assemblies*(Black, Cyan, Magenta, and Yellow)
Unpack the machine and check the components
Waste Toner Box Belt Unit
- The illustrations in this Quick Setup Guide show the HL-L3240CDW.
- Brother aims to reduce waste and save both raw materials and the
energy required to produce them. Read more about our environmental work at www.brotherearth.com than 2 metres long.
- Network cable (HL-L3240CDW / HL-L3280CDW / HL-L8240CDW)
Use a straight-through Category 5 (or greater) twisted-pair cable.
Remove the packing materials and re-install the toner cartridge and drum
unit assemblies
Load paper in the paper tray
NOTE:
Before connecting the power cord, locate the Serial Number label on the back or side of the machine. Record this number for Registration and Warranty support.
Select your language (if needed)
-
For LCD models
- Press ▼ or ▲ to select [Initial Setup], and then press OK.
- Press ▼ or ▲ to select [Local Language], and then press OK.
- Press ▼ or ▲ to select your language, and then press OK.
- Press Cancel.
-
For Touchscreen models
- On the machine’s Touchscreen, press [Settings] > [All Settings] > [Initial Setup] > [Local Language].
- Press your
- Press .
Connect your computer or mobile device to your machine
Follow these steps to complete the setup using one of the connection types available on your machine
Visit setup.brother.com to download and install Brother software
Setup Finished
You can now print using your machine. To check for the latest firmware, visit support.brother.com/up7
Important Notice for Network Security: The default password to manage this machine’s settings is located on the back of the machine and marked “ Pwd ”.
We recommend immediately changing the default password to protect your machine from unauthorised access
Can’t Connect? Check the following:
Manual wireless setup (Wireless models)
If the wireless setup is not successful, try to set up the connection
manually.
Find your SSID (Network Name) and Network Key (Password) on your wireless
access point/router and write them in the table provided below.
SSID
(Network Name)
|
---|---
Network Key (Password)|
If you cannot find this information, ask your network administrator or wireless access point/router manufacturer.
- For LCD models
To select menu options, press
▲ or ▼, and then press OK to confirm.
Select [Network] >
[WLAN(Wi-Fi)] > [Find Network].
Follow the LCD instructions.
- For Touchscreen models Press >
[Find Wi-Fi Network]. Follow the Touchscreen instructions
Select the SSID (Network Name) for your access point/router and enter the Network Key (Password).
For LCD models
Press and hold ▲/▼ to select one of the following characters:
0123456789abcdefghijklmnopqrstuvwxy zABCDEFGHIJKLMNOPQRSTUVWXY
Z(space)!”#$%&'()*+,-./:;<=>?@[\]^_‘{|}~
When the wireless setup is successful, the Touchscreen/LCD displays
[Connected].
If setup is not successful, restart your Brother machine and your wireless
access point/router, and repeat
Read More About This Manual & Download PDF:
References
- setup.brother.com | Official Machine setup site | Brother
- Brother Solutions Center
- Brother Solutions Center
- Brother Solutions Center
- Brother Group SDGs Special Site: Brother SDGs story