PATLITE WD PRO Series Wireless Data Acquisition System WD PRO Transmitter Instruction Manual

Wireless Data Acquisition System
WD PRO Transmitter
TYPE WDT-6LR-Z2-PRO
Instruction Manual (Digest version)

WD PRO Series Wireless Data Acquisition System WD PRO Transmitter

Notice To Customer
Thank for your purchasing our PATLITE products.

• This Wireless Data Acquisition Systern WD PRO transmitter (hereafter referred to as “this product”) is a WD PRO Series product.
• Request the installation and wiring be performed by a professional contractor if construction work is involved.
• Prior to installation, read this manual thoroughly before using this product to ensure correct use.
• Re-read this manual before conducting maintenance, inspections, repairs, and so on. If you have any questions about this product, please contact our service and repair desk listed on the back of this manual.
• For details on use, from our website download and refer to the Instruction Manual.

Home page address
www.patlie.com
To the Contractor

Before you begin

About Safety Symbols

• To prevent injuries to the user and other personnel, as well as to prevent damage to assets, note the following.

• The degree of harm and damage that will occur when misuse is made by iqnoring the contents of the icons indicated is explained below.
  WARNING
  This symbol indicates, “Failure to follow the instructions may lead to death or serious injury.”
  CAUTION
  This symbol indicates, “Failure to follow the instructions may lead to injury or property damage.”

• The following symbols classify and describe the content of associated messages.

| This symbol identifies “Prohibited” operations that should never be carried out.
---|---
| This symbol identifies “Mandatory” instructions that should always be carried out.
| This symbol identifies general “Caution” related information.

Safety precautions

WARNING
This product gets various data and wirelessly transfers this data from a transmitter to a receiver. Do not use this product for any other purpose.
Do not use this product in the vicinity of implanted cardiac pacemakers and other medical equipment, as this product’s radio waves may affect the performance of these devices.
Do not use or install the receiver in locations where liquids such as water is present, oil will splatter, or locations that are humid or dusty. Failure to follow these instructions could result in fire, electric shock or product failure.
To prevent accidents, do not use this product other than for its intended purpose and do not run operations or maintenance other than those described in this manual.
Do not use this product where high reliability is required and where human life is involved, such as medical equipment, atomic energy equipment and machinery, aviation and aerospace, transportation, and control of other equipment. If this product is used for these applications, we cannot be held responsible in the event of injury or property damage.
Do not modify or disassemble this product. Failure to follow these instructions could result in fire or electric shock.
Do not use this product when there is condensation. Failure to follow these instructions could result in fire or electric shock.
Do not allow liquids to enter the receiver, and do not allow it to have contact with metallic objects. Failure to follow these instructions could result in fire or electric shock.

Request the installation and wiring be performed by a professional contractor if construction work is involved. Failure to follow this instruction could result in fire, electric shock or falls.
Turn off the power before performing any electric wiring or product installation. Failure to follow this instruction could result in electric shock.|
  In places such as aircraft and hospitals, turn off this product where usage of wireless devices is prohibited and where its radio waves affect surrounding equipment.
We cannot foresee all circumstances concerning the handling and dangers associated with this product. Therefore, not every possible danger is indicated in this instruction manual. To prevent accidents when operating or maintaining the product, in addition to the safety guidelines identified in the instructions of this manual, follow all general safety guidelines.
in the unlikely event that there is an abnormal situation such as smoke or odors emitting from the product, immediately cut the power supplied to the product. Continued use of the product in this condition could result in fire or electric shock.

CAUTION
Do not install this product near other electrical appliances. If you install this product near a facsimile, personal computer, television, microwave oven, or equipment using a motor, this product may not operate properly.
Do not use or store this product in the following locations. Failure to follow this instruction could result in a malfunction or product failure.

• Environments with poor breathability and ventilation
• Near equipment that generate strong electrical or strong magnetic fields
• Places exposed to direct sunlight
• Locations subject to shock and vibration
• Near heating appliances
• Environments where there is dust, iron powder, and soon
• Places near fire or environments with high temperatures and humidity
• Locations where the product could fall and break
• Locations exposed to salty sea air

Do not use this product near chemicals. This product could melt or become deformed if any chemicals adhere to it.

Due to the nature of radio waves, communication can be disabled even over insignificant distances as a result of noise or other environmental factors.
  Always use this product with each signal tower unit and head cover securely installed to maintain dust and waterproofing performance.
Do not use this product with the O-ring removed. Waterproofing will be affected. Failure to follow this instruction will result in injury or equipment damage.
To prevent static electricity, discharge the static electrical charge in your body before starting work. (You can discharge static electricity by touching your hand on grounded metal objects.)

• Conformity requirements for the UL Standard
  – Maximum surrounding air temperature rating of 50 °C
  – For use in Pollution Degree 2 Environment.

| This telecommunication equipment conforms to the standard or technical requirements of NBTC.
---|---

FCC notation requirement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

• FCC notation requirement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1.  This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

♦ FCC CAUTION
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However,there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by tuming the equipment off and on,the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
  {Responsible party in U.S.A.} PATLITE U.S.A. Corporation, R20130 S. Western Ave. Torrance, CA90501, U.S.A.

Model

WDT-6LR-Z2-PRO: ø 60, WD PRO Series

Compatible Unit Model

• You can mount the following to the top of this product.
  Contact Input –| Serial Communication Base Unit WDB-D80S-PRO
  ---|---
  [Caution] Do not connect units other than compatible units.
  Failure to follow this instruction could result in equipment damage.

• You can mount the following to the top of this product.
  LED Unit (Maximum number of tiers: 5)|  LR6-E-O, LR6-E-OZ, LR6-E-MZ
  ---|---
  Buzzer unit| LR6-BW

R,Y,G,B,C

Content

Part Name and Dimensions

Mounting Methods

Follow the instructions below when installing or removing this product and detaching parts (such as the LED unit and buzzer unit) from the LR signal tower.

• The WD PRO base unit applies to the series. The following shows how to attach and detach the Contact Input- Serial Communication Base Unit (WDB-D80X-PRO).

WARNING
Before any work is done, disconnect the power.
Be sure wiring is carried out correctly. Otherwise, an internal short-circuit or combustion may occur.
CAUTION
**** Install this product directly above the WD PRO base unit.
The maximum number of attachments per Signal Tower is five LED units + one buzzer unit + this product. Do not attach units beyond that.
Do not apply excessive force to the units or WD PRO base unit. Failure to follow this instruction could result in equipment damage.
Do not touch the connectors on the units or WD PRO base unit, or the LED in LED units. Failure to follow this instruction could result in equipment damage.
Use the following method when detaching units. Failure to follow these instructions could result in equipment damage. Attaching: Attach units one at a time to the WD PRO base unit. Detaching: Hold adjacent units and remove units one at a time.
Securely lock each unit when attaching. Failure to follow this instruction could result in equipment damage.

NOTIC

• Before starting setup and wiring work, always read the Instruction Manual (which you can download from our website).

Attach
Align this product with the positioning mark on the WD PRO base unit and tum clockwise to lock.

Detach

While holding the WD PRO base unit, turn this product counterclockwise to release the lock, then lift up.

How to Read the Positioning Mark

Specications

For customer in China
PATLITE Corporation G2j
PATLITE Corporation Head office www.patlite.com/
PATLITE (U.S.A.) Corporation www.patlite.com/
PATLITE Europe GmbH Germany www.patlite.eu/
PATLITE (SINGAPORE) PTE LTD www.patlite-ap.com/
PATLITE (CHINA) Corporation www.patlite.cn/
PATLITE KOREA CO.,LTD. www.patlite.co.kr/
PATLITE TAIWAN CO., LTD. www.patlite.tw/
PATLITE (THAILAND) CO., LTD. www.patlite.co.th/
PATLITE MEXICO S.A. de C.V. www.patlite.com.mx/

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>