MTSIM Rail Mount Keyboard Bridge Instruction Manual

MTSIM Rail Mount Keyboard Bridge

Product Information: RAIL MOUNT KEYBOARD BRIDGE

The RAIL MOUNT KEYBOARD BRIDGE is a versatile accessory that allows you to mount your keyboard onto a rail system. It provides a convenient solution for optimizing workspace ergonomics and increasing productivity.

General Assembly Information

• Profile Nut: Hex key set with ball head and extension or similar tool is required for assembly.
• Universal Connector: The bridge includes universal connectors with slot nuts (M8x30) for secure attachment.
• Bolt Dimensions: The bridge utilizes M8 bolts with various lengths (M8x35, M8x25) for assembly.
• Profile Cap Assembly: The bridge includes profile caps for a finished look.
• Parts: The package includes all necessary parts for assembly, and no extra or spare parts are provided.

Product Usage Instructions

Assembly Steps:

1. Ensure a flat surface for assembly to ensure proper alignment of parts.
2. Follow the steps mirrored for both sides of the bridge.
3. Adjust the distance of the keyboard plate to your table edge as desired.
4. Secure the universal connectors using M8x16 flat head black bolts and slot nuts.
5. Move the bridge to the desired height before tightening the bolts. Both sides should be at the same height.
6. Attach the cap using M5 and M6 slot nuts, along with M6x16 and M6x18 flat head black bolts.
7. Ensure all components are securely tightened.

Note: The assembly instructions provided are for the right side of the bridge, but should be mirrored for the left side.

For additional information and safety notices, please refer to the complete instruction manual provided.

GENERAL ASSEMBLY INFO AND HOW TO

PROFILE NUT

HEX KEY SET WITH BALL HEAD + EXTENSION OR SIMILAR REQUIRED

UNIVERSAL CONNECTOR

ALTERNATIVE

BOLT DIMENSIONS AND HOW TO MEASURE THEM [mm]

PROFILE CAP ASSEMBLY

PARTS

[dimensions in mm / different scales] No extra or spare parts listed!

BAG 1

BAG 2

DIMENSION

ASSEMBLY

QUICK RELEASE

WARNING NOTICES

• CAUTION! Do not clamp your fingers while attaching the rail mount keyboard bridge.
• CAUTION! Check before usage if all screws are tightened.
• CAUTION! Check before usage that the mounting plate is screwed on tight after making height adjustments.
• DANGER: Contains small parts not suitable for children under 3 years. Only suitable for children over 12 years and adults.

All MTSIM products are hand assembled and quality checked. The mount is designed for usage only with a computer controller (e.g. joystick or throttle). We exclude liability if the product is used for purposes other than intended. MTSIM shall be liable for damage arising from causes other than the detriment to life, body and health only to the extent that such damage arises from wilful misconduct, gross negligence or the culpable violation of a fundamental contractual obligation on the part of MTSIM or a vicarious agent (e.g. the delivery service) of MTSIM. Any further liability for damages shall be excluded.

If you have safety concerns or questions regarding assembly, contact us under info@mtsim.com or visit www.mtsim.com/en/

References

• MTSIM – MONSTERTECH – Simulation Design – Official Website

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>