Dirt Devil DD7002 Steam Mop Instruction Manual

Dirt Devil DD7002 Steam Mop

Product Information

• Product Name: Steam Mop
• Model Number: DD7002 / VS521
• Manufacturer: A.I.&E.
• Manufacturer Address: Adriaan Mulderweg 9-11, 5657 EM Eindhoven, The Netherlands
• Item Number: 871125247589
• Power: 1300W
• Voltage: 220-240V~50-60HZ
• Water Tank Capacity: 330ml
• Ready Time: 30 seconds
• Guarantee: 2 years

Product Usage Instructions

Installation

1. Attach the lower body (2) to the mop head (3) by snapping it into place.
2. Install the handle (1) into the lower body until it locks into the right place.
3. Install the water tank (4) below the main body.
4. Install the mop pad (5) on the mop head.
5. The steam mop assembly is now complete.

Operations

Special Features

• Removable water tank: The water tank is located on the bottom of the main body. It is recommended to use distilled or demineralized water instead of tap water.
• Filter: The steam mop is equipped with a filter to ensure clean steam.

Steam Control

1. Turn off the steam mop when taking the water tank off.
2. Fill the water tank with the water cup provided. Do not use chemicals in the water tank of your steam mop.
3. The steam control indicator light will stop blinking when the steam mop is ready to use.
4. Press the steam level button to choose the desired level of steam.
5. Please note that when you first press the steam level button, the steam is at its maximum level. Adjust the steam level by pressing the button again.

Microfiber Mop Pads

The steam mop comes with reusable microfiber mop pads that are machine washable and safe for virtually all hard floor surfaces.

There are two different pads included:

• The white microfiber pad is best for everyday use on delicate flooring like sealed hardwoods and laminate.
• The gray and white striped pad can be used for scrubbing heavily soiled floors.

Please refer to the extended manual by scanning the provided QR code for more detailed instructions.

A INSTRUCTION MANUAL
Steam-mop
Model number: DD7002 / VS521

IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS FOR FUTURE USE
This model is for household use only. Commercial use of this unit voids the manufacturer’s warranty.
READ ALL INSTRUCTIONS BEFORE USING YOUR STEAM MOP
When using an electrical appliance, basic precautions should be observed, including the following:

• Unplug from outlet when not in use and before conducting maintenance

WARNINGS

• TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY:
  Always switch off and unplug the appliances from the socket after use and before cleaning the appliance or any maintenance task.

• WARNING: Danger of scalding.

• This appliance can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
  Children shall not play with the appliance.

• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.

• Cleaning and user maintenance shall not be made by children without supervision.

• Keep the appliance out of the reach of children when it is energized or cooling down.

• The appliance shall not be left unattended while it is connected to socket.

• The appliance shall not be used if it has been dropped, if there are visible signs of damage or if it is leaking.

• Liquid or steam must not be directed towards equipment containing electrical components, such as the interior of ovens.

• If the power cord is damaged stop using the appliance immediately.

• To avoid a safety hazard, an authorized agency service engineer must replace the power cord.

• Keep hands, feet, loose clothing and hair away from rotating brushes.

• Use only the power plug supplied with the appliance.

• Static electricity: some carpets can cause a small buildup of static electricity. Any static discharge is not hazardous to health.

• Do not use your appliance out of doors or on any wet surface or for wet pick up.

• Do not pick up hard or sharp objects, matches, hot ashes, cigarette ends or other similar items.

• Do not spray with or pick up flammable liquids, cleaning fluids, aerosols or their vapors.

• Do not run over the power cord when using your appliance or remove the plug by pulling on the power cord.

• Do not continue to use your appliance or charger if it appears faulty.

• Agency service: To ensure the continued safe and efficient operation of this appliance we recommend that any servicing or repairs are only carried out by an authorized Agency service engineer.

• Do not use the appliance to clean animals or people.

• Do not use appliance in an enclosed space filled with vapor given off by oil-base paint, paint thinner, some moth proofing substances, flammable dust, or other explosive or toxic vapors

• Do not use on leather, wax polished furniture or floors, synthetic fabrics, valet or other delicate, steam-sensitive materials

• CAUTION: HOT SURFACE

• IPX4: Item is protected from splashing water, not matter the direction.

Product View

1. Steam control
2. Steam level indicator
3. Lower body
4. Mop head
5. Wire hook
6. Power switch
7. Filter
8. Power cord
9. Water tank
10. Water cup
11. Mop pad
12. Carpet glider
13. Wire hook
14. Metal tube
15. Tube lock
16. Water inlet
17. Handle

Installation of the item

Your steam mop assembles quickly and easily. It is packaged with the following items:

1. Attach lower body (2) to mop head (3) by snapping it into place
2. Install the handle (1) into the lower body until it lock into right place
3. Install the water tank (4) below the main body
4. Install the mop pad (5) on the mop head
5. Steam mop assembly is now complete

Operations

Special Features

Removable water tank
Water tank is located on the bottom of the main body. Distilled or demineralize water is recommended instead of tap water

Note:
Turn off the steam mop when taking the water tank off
Fill the water tank with the water cup
Do not use chemicals in the water tank of your steam mop

Steam Control
Steam control indicator light will stop blinking when steam mop is ready to use. Then press the steam level button to choose the level of steam you desire.

Note:
Press the power switch first and then press the steam control. Please note that when you first press the steam level button, the steam is at its maximum level. Please adjust your desired level by pressing the button.

Microfiber Mop Pads
Reusable microfiber mop pads are machine washable and safe for virtually all hard floor surfaces. Your steam mop may have come with two different pads. The white microfiber pad is best for everyday use on delicate flooring like sealed hardwoods and laminate. The gray and white striped pad can be used Mop pad for scrubbing heavily soiled floors and cleaning tougher messes.

Getting ready
The mop pad may have already come attached to the mop head.

1. Set mop head in mop pad, making sure quick-grip release tab is located on the back.
2. Fill the water tank.
   • Press the buttons on both sides of the tank and pull it out.
   • Pull out the rubber plug on the back of the tank.
   • Fill water tank with water. For beat results, water should be at room temperature.
   • Replace the water tank and gently slide it into place.
3. Quickly release the power cord and insert it into the 120volt power socket.
4. The indicator will light up when the steam mop is ready to use press the steam level button to select the steam level you want.

Note:
Upon first use of the steam mop or first use after refilling the water tank, the pump may make a “knocking” sound. This is normal and should only last a few seconds.

Before you clean
Thoroughly sweep or vacuum floor prior to cleaning with the steam mop.

Cleaning hard floors
Your steam mop is designed to clean hard flooring such as ceramic tile, vinyl, laminate, marble, stone and sealed hard wood floors. Use of your steam mop on waxed or some unwaxed floors may result in a diminished glossiness. The steam mop is not for inconspicuous area and check the care instructions from your flooring manufacturer.

1. Plug the unit in and wait 30 seconds for it to heat up. Choose the level of steam to clean your floor: Low(delicate floors). Medium(regular cleaning). High(durable floors or sticky messes). Begin cleaning by slowly passing the unit over the floor surface.
   Note:
   Press power switch before you press steam control. When you first press the steam level button, the steam is at its maximum level. Please adjust desired level by pressing the button.

2. To turn off the steam mop, continue to press the steam level button until the blue light is illuminated above the steam level button.

3. When the steam mop stops emitting steam, unplug the unit. Simply remove the water tank, refill and continue steaming.
   Note: Be sure to disinfect the floor, use a microfiber mat and wipe it back and forth at least three times with continuous steam. For best results, remove the liner and clean it after.

Carpet Gilder
This accessory is used to attach the steam mop to allow the steam mop to slide over the carpet, thus cleaning the carpet.

Note: Please make sure that carpet gilder has been buckled on the floor head. If it is not in the correct position, it will cause carpet gilder to fall out during the use of the steam mop.

Note: Move the steam mop in a continuous motion until you are finished. DO NOT leave the mop in a stationary position.

Maintenance & Care

1. Unplug power cord form outlet.
2. Carefully remove the mop pad from the mop head. The mop pad and lower assembly may be hot.
3. Any water remaining in the water tank should be emptied prior to machine storage.
4. Mop pad can be machine washed in warm water. Use only liquid detergents. Do not use fabric softeners or bleach for best results, air dry.
5. Wrap power cord around hook on back of the steam mop.
6. Wipe all surfaces of the steam mop with a soft cloth. Store upright in a protected, dry area.

Troubleshooting

WARNING
To reduce the risk of electric shock, turn power switch off and disconnect the plug form electrical outlet before performing maintenance or troubleshooting checks.

Note:
Other maintenance or service not included in the manual should be performed by an authorized service representative.

Specifications

• Power : 1300W
• Input voltage : 220 – 240 V AC 50-60 Hz
• Power plug : Type C (CEE 7/17)
• Capacity watertank : 330ml
• Usetime full tank : 15min
• Steam pressure: 0,6-0,8 bar
• Heating time : 30sec
• Cable length : 5m
• Range : 5,5m
• Removable tank : Yes
• Hard water filter : Yes
• Variable steam control : Yes
• Shape foot : Rectangle

PACKAGING CONTENT

• 1x steam mop
• 1x carpet slider
• 1x microfiber pad

The Environment
The symbol on this appliance indicates that this appliance may not be treated as household waste. Instead it must be handed over to the applicable collection point for the recycling of electrical and electronic equipment. Disposal must be carried out in accordance with local environmental regulations for waste disposal. For more detailed information about treatment, recovery and recycling of this appliance, please contact your local city office, your household and waste disposal service or the shop where you purchased the appliance.

Scan QR-Code for extended manual

References

• Que Faire de mes Déchets ? Découvrez les solutions pour tous vos déchets et nos conseils pour en produire moins.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>