Leica 55500 Tempus Asph Red Dot Sight Instruction Manual
- June 4, 2024
- Leica
Table of Contents
Instruction manual
FOREWORD
Dear customer,
we wish you a great deal of enjoyment and every success with your new Leica
product.
Please read this manual to familiarize yourself with the full scope of
functions your product has to offer.
Please use this product only as described in this manual. Only then can the
safe and easy operation be guaranteed.
Your Leica Camera AG
Please read the chapters “Safety Remarks” and “Important Information” before
using the product for the first time. Knowledge of the content will prevent
inadvertent damage
to the product, possible injuries, and other risks.
SCOPE OF DELIVERY
The standard scope of delivery* contains the following:
- Leica Tempus ASPH.
- Protective cap
- 2 mounting screws (T10)
- Tool for extracting the battery bracket
- Hex key 1.5 mm
- Test certificate
- Battery (CR 2032)
SPARE PARTS/ACCESSORIES
Contact Leica Customer Care or your specialist Leica retailer for details
on the latest spare parts/accessory range: en.leica-camera.com/Stores-Dealers
/Leica-dealer-locator
LEGAL INFORMATION
REGULATORY INFORMATION
You will find the manufacturing date of your product on the stickers on the
packaging. The date format is year/month/day.
DISPOSAL OF ELECTRICAL AND ELECTRONIC EQUIPMENT
**** (Applies within the EU and for other European countries with segregated
waste collection systems.)
This device contains electric and/or electronic components which must not be
disposed of in general household waste! Make sure to bring this device to a
local disposal collection point for recycling.
This service is free of charge. Any standard or rechargeable batteries used in
this device must be removed and disposed of separately in accordance with
local regulations.
Please contact your local authorities, a waste disposal collection point, or
the retailer, from whom you purchased the device for more information on
correct waste disposal.
SAFETY REMARKS
GENERAL INFORMATION
- Keep the device out of the reach of small children.
- Do not attempt to disassemble or modify the device; exposing the internal electronics may cause damage, injury or electric shock.
BATTERY
- Only the battery type stated and described in this manual must be used. Any improper use of the batteries or the use of unapproved battery types may result in an explosion!
- Do not expose the battery to sunlight, heat, humidity or moisture for prolonged periods of time. It must not be placed in a microwave oven or a high-pressure container as this would pose a fire or explosion hazard!
- Never dispose of batteries in fire and never attempt to heat, recharge, dismantle or break open a battery.
- Batteries must always be stored out of the reach of children. Do not leave batteries lying around, as they could be swallowed by children or pets.
IMPORTANT INFORMATION
GENERAL INFORMATION
- Protect the device against any kind of shocks that are not caused by the weapon.
- Damaged sealing rings must be replaced.
- Do not attempt to take the device apart yourself. Repairs must only be carried out in authorized workshops.
- Make a note of the serial number of your device, as this information will be extremely important in case of loss.
- Depleted batteries must never be disposed of in household waste as they contain toxic materials that are harmful to the environment. Battery collection points are provided at most large retail outlets; alternatively, you can dispose of old batteries at a local special waste collection point to ensure correct recycling.
- Remove the battery from the housing if you will not be using the product for an extended period of time.
- Do not use excessive force when making adjustments via the adjustment screws.
- Low temperatures impair battery performance. Carry the device close to the body in cold conditions and use a fresh battery.
- Make sure to store the batteries in a cool, dry place.
WARRANTY
In addition to your statutory warranty rights with regards to the seller,
Leica Camera AG offers a 10-year warranty for the optics and housing of this
Leica product, and/or a 2- year warranty for the electronics as stated in the
conditions below. The Leica warranty does not impact on any statutory consumer
rights in accordance with relevant national law or any consumer rights
vis-a-vis the retailer arising from the purchase contract concluded between
them. Please note different warranty regulations for the USA at the
following link: leicacamerausa.com/sport-optics-warranty
WARRANTY CONDITIONS
Our ten-year warranty for this product commences on the date of sale by an authorized retailer under the following conditions:
-
Any claims related to manufacturing defects during the warranty period will be remedied free of charge at our discretion by repairing the defect, replacing defective parts or
by replacing the faulty product with a similar product of perfect function. All other claims of any kind and on whatever legal basis shall not be accepted in connection with this warranty. -
Wear parts like eyecups, leather details, armoring, carry straps and accessories are exempt from the warranty. The same applies to surface damage.
-
Any warranty claims become void if the defect in question is a result of improper handling – which also includes the use of third-party accessories – or if the product was manipulated by unauthorized persons or workshops or if the serial number of the product was rendered illegible.
-
Warranty claims can be submitted only in conjunction with the original proof of purchase – complete with the date of purchase, as well as the address and signature of an
authorized retailer. -
In case of a warranty claim, please send the Leica product, the original proof of purchase, and a description of the fault to Leica Camera AG Customer Care.
PICK-UP SERVICE FOR REPAIR SUBMISSIONS
(Applies for EU only)
We will organize the shipping of your device to our Customer Care department
if you should notice a problem with your device during the warranty period.
Please contact our service hotline to make the necessary arrangements (+49
(0)6441 2080 189). Our pick-up service will collect your Leica product at the
agreed time from your premises free of charge and transport it to our Customer
Care location for evaluation. Contact: en.leica-camera.com/Contact
Definition of the various categories of information found in this manual
Note
-
Additional Information
Caution -
Non-compliance may result in damage to the device and accessories
-
Non-compliance may result in personal injury
Warning -
Non-compliance may result in serious injury or death
PART DESIGNATIONS
- Lateral adjustment screw
- Battery bracket
- 3a/3b Brightness adjustment buttons
- Vertical adjustment screw
- Mounting bores (Docter profile)
Do not tamper with the housing screws!
Caution
Never look directly at the sun or other bright sources of light through your
Leica optics! Doing so may seriously damage your eyes!
Warning
Make sure the device is not loaded before doing any work or changing settings
on the rifle scope and before changing batteries.
PREPARATION
INSERTING/CHANGING THE BATTERY
A cylindrical 3 V lithium cell (type CR 2032) is required for power
supply.
-
Use the tool provided to hook into the upper edge of the battery bracket to extract it
-
Remove old batteries (where inserted)
-
Place the battery in the bracket compartment
-
Ensure correct polarity: + = top
-
Insert the battery bracket
MOUNTING
Leica Tempus ASPH. has the same profile as Docter Sight reflex sights. The
outer dimensions are not identical. The device is attached with two Torx
screws. Popular mountings manufacturers include:
- EAW
- Dentler
- Recknagel
- Spuhr
- Henneberger
- MAK
- Innomount
- Ziegler e.g.
The range of optional mountings is too large for Leica Camera AG to exhaustively test all available types for compatibility and quality. Leica Camera AG cannot provide any guarantee of function for the use of so-called “no name” mountings, as these may not comply with standards. Please make sure to check for compatibility before purchasing any mounting. Your gunsmith will be happy to offer advice.
SETTINGS AND OPERATION
POWERING ON/OFF
To switch on the device
- Press one of the brightness adjustment buttons briefly To switch off the device
- Press and hold one of the brightness adjustment buttons briefly (≈ 3 s)
ADJUSTING THE POINT OF IMPACT
Calibration of the LED unit to align with the weapon is necessary if there are
points of impact offsets.
The procedure is the same on the two adjustment screws (page: 1, elevation:
4).
- Turn the adjustment screws to effect compensation (see below)
- The illuminated dot will move in the relevant direction.
- The adjustment screws come with a very fine detent. One-click is equal to 1.1 MOA.
| – Point of impact too high (downward correction required)
▸ Turn the adjustment screw 4 in a clockwise direction
---|---
| –
Point of impact too low (upward correction required)
▸ Turn the adjustment screw 4 in an anti-clockwise direction
| – Point of impact too far left (correction to the right required)
▸ Turn the adjustment screw 1 in a clockwise direction
| – Point of impact too far right (correction to the left required)
▸ Turn the adjustment screw 1 anti-clockwise direction
SETTING THE BRIGHTNESS
The brightness of the illuminated dot can be adjusted in multiple
increments.
Decreasing the brightness
-
Press button 3a once.
Increasing the brightness -
Press button 3b once.
Note
The illuminated dot will deactivate automatically after 4 mins of inactivity.
The preset brightness setting of the illuminated dot will be retained.
CARE/CLEANING
- Your Leica product requires no special care.
- Coarse dirt particles like sand should be removed with a soft brush or simply blown off.
- Fingerprints, etc. on the lens can be pre-cleaned with a moist cloth and then wiped down with clean leather or lint-free cloth.
- The device should be stored in a well-ventilated, dry, and cool place to prevent fungal growth (particularly important in humid climates).
- Do not use alcohol or chemical cleaning solutions on the optics or housing.
- Do not use excessive force when cleaning a severely soiled lens surface. The coating is abrasion-resistant, but not impervious to sand or salt crystals.
- The housing should be cleaned using a damp leather cloth only. Using a dry cloth may cause friction, which may result in a static discharge.
- Always rinse off any traces of salt water! Dried salt crystals could damage the surfaces.
TECHNICAL DATA
Device designation | LEICA TEMPUS ASPH. 3.5 MOA | LEICA TEMPUS ASPH. 2.0 MOA |
---|---|---|
Order No. | 55500 | 55502 |
Front lens (aspherical) | 21 x 25 mm | |
Parallax-free | 40 m | |
Mounting options | Docter Sight | |
Adjusting the point of impact | 1.1 MOA per click (1.6 cm at 50 m) | |
Reticle adjustment range | 100 x 100 MOA (approx. 1.5 m at 50 m) | |
Illuminated dot size | 3.5 MOA (approx. 5 cm at 50 m) | |
Reticle lighting | 12 increments | |
Automatic switch-off | 4 h | |
Waterproofing | 1 m/10 min | |
Weight | 37 g/40 g (without/with battery) | |
Dimensions (L x W x H) | 53.5 x 34.5 x 28 mm | |
Shooting stability | 800 g (1 ms), not suitable for pistols | |
Power supply | CR2032 – lithium coin battery, 3 V, 230 mAh |
Subject to changes in design, production, and scope of delivery.
LEICA CUSTOMER CARE
Please contact Leica Camera AG Customer Care for the maintenance of your Leica
equipment and for help and advice regarding Leica products and how to order
them. You can also contact the Customer Care department or the repair service
provided by your regional Leica subsidiary for repairs or warranty claims.
Leica Camera AG
Leica Customer Care
Am Leitz-Park 5
35578 Wetzlar
Germany
Phone: +49 (0)6441 2080-189
Fax: +49 (0)6441 2080-339
Email:customer.care@leica-camera.com
www.leica-camera.com
Documents / Resources
|
Leica 55500 Tempus Asph Red Dot
Sight
[pdf] Instruction Manual
55500 Tempus Asph Red Dot Sight, 55500, Tempus Asph Red Dot Sight, Asph Red
Dot Sight, Red Dot Sight, Dot Sight, Sight
---|---
References
- Contact | Leica Camera AG
- Leica Dealer Locator | Leica Camera AG
- Leica Camera Wetzlar Germany – Official | International
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>