rizoma ZTH064 Cupolino Headlight Fairing User Manual

rizoma ZTH064 Cupolino Headlight Fairing

Product Information

Rizoma is a manufacturer of motorcycle accessories and components. The product in question is the Cupolino Headlight fairing, identified by the part number ZTH064.

General Conditions

Attention: This component comes assembled for shipping purposes only. Tighten all fasteners to appropriate torque specifications before riding.
Descriptions preceded by this symbol contain information, instructions, or procedures, which, if not followed, may result in death or serious injury.

1. Carefully read, understand and follow these instructions, they are an essential part of the product. If you have any doubt whatsoever regarding the installation or use of your RIZOMA product, please see your authorized RIZOMA dealer for assistance (on www.rizoma.com).
2. For correct installation, all tightening has to be done after the correct positioning of the accessories without restricting the moving parts, to not compromise the correct functioning of the product.
3. After installing any Rizoma product, please check that all related components of the motorbike function e.g. brakes, throttle, clutch, lights and steering. We strongly suggest to repeat these checks periodically, especially after long trips or prolonged periods of not using the bike.

Your RIZOMA products require regular inspection and maintenance. The more you ride the more often you must inspect your RIZOMA products. If your products are leaking, bent, deformed, cracked, chipped or worn, no matter how slight, immediately have a RIZOMA dealer inspect the products before you ride again. In any case never try to repair or modify the Rizoma products or their components, always replace with Rizoma original components.
Rizoma products may not be compatible with your motorcycle or with other aftermarket equipment installed before. For your safety Rizoma suggests to always contact your RIZOMA dealer.
O.E.M.: original equipment manufacturer.

Product Usage Instructions

1. Carefully read, understand, and follow the provided instructions as they are essential for proper product usage. If there are any doubts or questions, consult an authorized RIZOMA dealer for assistance.
2. After installing any Rizoma product, it is important to check that all related components of the motorbike function properly, such as brakes, throttle, clutch, lights, and steering. Thesechecks should be repeated periodically, especially after long trips or prolonged periods of not using the bike.
3. Your RIZOMA products require regular inspection and maintenance. The more you ride, the more frequently you should inspect your RIZOMA products. If any product appears to be leaking, bent, deformed, cracked, chipped, or worn, no matter how slight, it is recommended to have a RIZOMA dealer inspect the products beforeriding again. Under no circumstances should you attempt to repair or modify Rizoma products or their components; always replace them with Rizoma original components.

It is important to note that the provided instructions do not include the removal of OEM (original equipment manufacturer)components.

Product Assembly Instructions

Before you start mounting the product please check the completeness of the kit on the part list. The difficulty level and the time of assemblage shown do not include the removal of OEM components.
Warning: Make sure that your motorbike is standingfirmly before you start work, as a fall may lead to damage to the motorbike or injury to you or others.

1. WARNING:
   TO CLEAN YOUR HEADLIGHT FAIRING DON’T USE DETERGENT, AGGRESSIVE PRODUCTS OR ABRASIVE SPONGE THAT CAN DAMAGE OR SCRATCH YOUR HEADLIGHT FAIRING, BUT USE ONLY NEUTRAL DETERGENT WITH COLD WATER.
   WARNING:
   DO NOT EVER TRY TO CLEAN OR ADJUST THE HEADLIGHT FAIRING DURING DRIVING THE MOTORCYCLE. THE BIKER WILL HAVE A REDUCED CAPACITY TO KEEP CONTROL OF THE MOTORCYCLE, IF THE BIKER REMOVES THE HANDS FROM THE HANDLEBAR DURING DRIVING. IF YOU ATTEMPT TO CLEAN OR ADJUST
   THE HEADLIGHT FAIRING WHILST DRIVING THE MOTORCYCLE YOU COULD LOSE CONTROL AND HAVE AN ACCIDENT.

2. REMOVE ORIGINAL SCREWS

3. INSTALL RUBBER NUTS AND WASHERS

4. INSTALL BRACKET

5. INSTALL HEADLIGHT FAIRING

Difficulty Level: Facile (Simple)
Estimated Time of Assemblage: 15-20 minutes
Warnings:

1. Step 1: Remove the original screws using the provided part number ZTH064 Cupolino Headlight fairing.
2. Step 2: Install the rubber nuts and washers using the provided part number ZTH064 Cupolino Headlight fairing.

Please refer to the part list to ensure the completeness of the kit before proceeding with the assembly process. RIZOMA reserves the right, in its sole discretion, to make changes to the product and this information at any time and without prior notice. Although many catalogs and advertisements depict riders engaged in extreme or stunt riding, this activity is extremely dangerous, increases the risk of an accident, and increases the severity of any injury.
The action depicted is performed by professionals under strictly controlled riding conditions.
Only you know the limits of your riding ability and only you can control the conditions under which you ride. By and in consideration for his/her purchase and use of the RIZOMA product, the user expressly recognizes and agrees that in the event of any claim arising out of the use of this RIZOMA product, whether such claim is based in contract, warranty, tort (personal injury or wrongful death) or otherwise, the laws of the Republic of Italy shall apply and jurisdiction and venue for any such action shall be in the Courts of Busto Arsizio, Italy.
All riders are strongly urged to take a motorcycle rider safety clinic. Always wear a properly fitted and fastened motorcycle helmet (RIZOMA recommends a full face helmet), that has been approved by ANSI , SNELL, CE, or any other relevant authority, and any other safety equipment necessary for your riding style, such as full finger gloves, boots, and body armor.
Be sure to read and follow all the instructions and warnings that originally accompanied your motorcycle, as well as the literature that accompanied any other component parts installed on your motorcycle. Be sure that your tires are inflated to the correct pressure and that there is no damage whatsoever in the tread or sidewall of the tire.
Some of our products may not be approved for road circulation in the countries where homologation is required.
Thus RIZOMA® srl declines any responsibility for a different use of its products.

References

• Home - Rizoma

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>