TELWIN 954583 Starter Charger Instruction Manual

TELWIN 954583 Starter Charger

Product Information

The product is a battery charger with multiple language options for the user manual. It has safety features to prevent accidents and can be used by both adults and children above the age of 8. The charger comes with different types of output cables for charging batteries.

Product Usage Instructions

1. Before using the battery charger, carefully read the instruction manual.
2. General Safety Rules:
   • During charging, avoid flames and sparks as the battery produces explosive gases. Do not smoke.
   • Place the batteries to be charged in a well-ventilated area.
3. Introduction and General Description:
   • The battery charger can charge different types of batteries using different output cables.
   • There are two types of output cables available:
   1. Cables fitted with eyelets (fig. B-1)
   2. Cables fitted with clamps (fig. B-2)
   • Before using the appliance, make sure to properly instruct inexperienced and untrained individuals.
   • The appliance can be used by children aged 8 and above, as well as individuals with reduced physical, sensory, or mental capabilities, provided they have received proper supervision or instruction.
   • Children should not play with the appliance, and user maintenance should not be done by children without supervision.
   • Disconnect the mains cable before performing any maintenance.
4. Description of the Battery Charger:
   • The charger has control, adjustment, and indicator devices.
   • To select the charge current/charge voltage:
   1. Press the button seen in fig. A-1 to set the charge levels to 1A – 6V, 1A ( )12V, 4A ( )12V.
   2. The LEDs seen in fig. A-2 will light up according to the selected charge current.
   • To enable the AGM function, press and hold the button seen in fig. A-1 for 3 seconds.

EXPLANATION OF DANGER, MANDATORY AND PROHIBITION SIGNS

• DANGER OF EXPLOSION
• GENERAL HAZARD
• DANGER OF CORROSIVE SUBSTANCES
• Symbol indicating separation of electrical and electronic appliances for refuse collection. The user is not allowed to dispose of these appliances as solid, mixed urban refuse, and must do it through authorised refuse collection centres.

INSTRUCTION MANUAL

WARNING: BEFORE USING THE BATTERY CHARGER READ THE INSTRUCTION MANUAL CAREFULLY.

GENERAL SAFETY RULES WHEN USING THIS BATTERY CHARGER

• During the charge the battery produces explosive gases, avoid the formation of
•  Ames and sparks. DO NOT SMOKE.
• Position the batteries to be charged in a well-ventilated place.
• Inexperience and untrained people should be properly instructed before using the appliance.
• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
• Children shall not play with the appliance.
• Cleaning and user maintenance shall not be made by children without supervision.
• Disconnect the mains cable before connecting to or disconnecting the charging cables from the battery.
• Do not connect or disconnect the clamps to or from the battery with the battery charger operating.
• Never use the battery charger inside the car or in the bonnet.
• Substitute the mains cable only with an original one.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualiÿed persons in order to avoid a hazard.
• Do not use the battery charger to charge batteries which are not rechargeable.
• Make sure the available power supply voltage corresponds to that shown on the battery charger rating plate.
• To avoid damaging the vehicle’s electronics, read, keep and take very careful note of the information supplied by the vehicle manufacturer, when using the battery charger either for charging or starting; the same applies to the instructions supplied by the battery manufacturer.
• This battery charger has components such as switches and relays which can cause arcs or sparks. Therefore when using it in a garage or in a similar place set the battery charger in a suitable case.
• Repair or maintenance of the inside of the battery charger can be executed only by skilled technicians.
• WARNING: ALWAYS DISCONNECT THE POWER SUPPLY CABLE FROM THE MAINS BEFORE CARRYING OUT ANY SIMPLE MAINTENANCE OPERATION ON THE BATTERY CHARGER.

INTRODUCTION AND GENERAL DESCRIPTION

• This battery charger is used to charge electrolyte free lead batteries used on motor vehicles (petrol and diesel), motorcycles, boats etc., and is designed for charging sealed batteries.
• Rechargeable accumulators according to the output voltage available: 6V / 3 cells; 12V / 6 cells.
• This model is a single phase 230V 50/60Hz battery charger, with constantly electronically controlled current and voltage. The charge voltage and current supplied by the device have a IU charge curve.
• Standard features:
• The device allows you to connect deferent types of output cables for the charging of batteries:
  • cables attached with eyelets (g. B-1);
  • cables attached with clamps (g. B-2).

DESCRIPTION OF THE BATTERY CHARGER

• Control, adjustment and indicator devices.
• Selecting the charge current/charge voltage: Press the button seen in fig . A-1 to set the charge levels to 1A – 6V, 1A ( )12V, 4A ( )12V: the LEDs seen in fig. A-2 will light up according to the selected charge current.
• Press and hold the button seen in fig. A-1 for 3 seconds to enable the “AGM ” and “RECOVERY ” (fig. A-4) functions:
• The “AGM ” function is useful for charging “AGM” type batteries: sealed lead batteries, with electrolyte on absorbent material, or for charging standard batteries in low temperature conditions below 0°C “COLD”.
• The “RECOVERY ” function, used at the start of the charging process is designed to recover sulphated batteries.

Warning indications:

• Yellow LED ( ) (fig. A-5): polarity reversal, Danger!!! Invert the charge clamp connections!
  

• Orange LED “25%” (fig. A-3): charge in progress.

• Orange LED “50%” (fig. A-3): charge in progress.

• Green LED “75%” (fig. A-3): charge in progress.

• Green LED “100%” (fig. A-3): charge completed.

INSTALLATION

BATTERY CHARGER POSITION

• Place the battery charger in a stable position during use.
• Do not lift the battery charger using the power cable or charge cable.

CONNECTION TO THE MAINS

• The battery charger must only be connected to a mains power supply with neutral conductor connected to earth.
• Make sure that the mains voltage is equivalent to the operating voltage.
• The power line must have a protection system, such as fuses or circuit breakers, that can support the maximum apparatus absorption.
• Use the relative power cable when connecting to the mains.
• Any power cable extensions must be of suitable size, never lower than that of the tofitian).

GUARANTEE

The manufacturer guarantees proper operation of the machines and undertakes to replace free of charge any parts should they be damaged due to poor quality of materials or manufacturing defects within 12 months of the date of commissioning of the machine, when proven by certificate. Returned machines, also under guarantee, should be dispatched CARRIAGE PAID and will be returned CARRIAGE FORWARD. This with the exception of, as decreed, machines considered as consumer goods according to European directive 1999/44/EC, only when sold in member states of the EU. The guarantee certificate is only valid when accompanied by an official receipt or delivery note. Problems arising from improper use, tampering or negligence are excluded from the guarantee. Furthermore, the manufacturer declines any liability for all direct or indirect damages.

CERTIFICATE OF GUARANTEE

• Date of buying__
• Sales company (Name and Signature)____
• The product is in compliance with:__

DIRECTIVES

LVD 2014/35/EU + Amdt.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>