MARS GAMING MHub True Wireless Earbuds User Guide
- June 4, 2024
- MARS GAMING
Table of Contents
GAMING MHub True Wireless Earbuds
User Guide
PRODUCT OVERVIEW
- Earbuds
- Charging case
- USB-C / USB-A charging cable
- 3 size ear tips
SETUP
Please fully charge the charging case and earbuds battery before you use it
for the first time with the included USB-C/USB-A cable.
SILICON EAR TIPS
MHIB includes 3-size silicon ear tips 1. M, S which helps to improve comfort,
sound isolation, sound quality, and grip. Choose the one it fits your ear
canal better by simply swapping the ear tips.
POWER ON
- The earbuds will switch ON when they are taken out from the charging case. If the earbuds have been previously paired, they will be automatically connected to the Bluetooth device.
- If the earbuds are not paired and they are outside the charging case for a few minutes they will automatically power OFF to save battery. Press and hold the touch sensor for 1,5 seconds to power ON the earbuds.
POWER OFF
- Put the earbuds back in the charging case and close the case, they will automatically power OFF.
- Press and hold both earbuds’ touch sensors for 5 seconds to power OFF.
BLUETOOTH PAIRING
- Take out the earbuds from the charging case, the LED will blink in red and blue when in pairing mode.
- Enable Bluetooth in the audio device and look for ‘MHIB” in the Bluetooth device list.
- When the device has been successfully paired, the earbuds LED will switch OFF.
- If you want to pair another device, make sure to switch OFF other Bluetooth-paired devices.
TOUCH SENSOR FUNCTIONS
| ACTION| FUNCTION
---|---|---
GENERAL| Press and hold 5s| Power OFF
Press and hold 1.5s| Power ON
Press and hold 1,5s| -Decrease/
Increase Volume
MULTIMEDIA| 2x Taps| Play/Pause
3x Taps| * Previous
Next Track
4x Taps| Voice Assistant
CALLS| 1x Tap| Answer
Hang Call
Press and hold for 1s| Reject Call
- Press the left earbud to decrease and the right to increase the volume
- Press left earbud to previous and the right to next track
CHARGING
Please fully charge the charging case and earbuds battery before you use it for the first time. Use the USB-C/USB-A cable included to charge the case connecting it to the computer USB or any USB charge plug adapter, the case and earbuds will be fully charged in 1,5 hours. Earbuds’ playtime may vary depending on the device, volume, and audio content played.
LED ALERTS
| LED STATUS| DESCRIPTION
---|---|---
EARBUDS| Blinking RED/BLUE| Pairing mode
No LED| Successfully paired
Static RED| Charging
No LED| Fully charged
CASH| Blinking RED| Case is charging
Static RED| Case fully charged
Static BLUE| Charging earbuds
No LED| Earbuds finished charging
TROUBLESHOOTING
Unsuccessful connection
- Make sure the earbuds are ON and the earbuds LED is blinking RED and BLUE.
- Make sure the earbuds are not already connected to another Bluetooth device.
- Put earbuds inside the case and take them out repeat the pairing process.
Stuttering audio
- Check if the Bluetooth device is too far from the earbuds.
- Check if there are any obstacles between the device and earbuds.
Earbuds don’t switch ON
- The battery is low
- Put them inside the case and charge them.
From the Mars Gaming team: we want to thank you for the purchase of this
product!
We try to improve every day to offer the best service and the best quality on
our peripherals. Thank you for your trust!
ARE YOU HAPPY WITH YOUR PURCHASE?
| YES | NO |
|---|---|
| Rate us in your marketplace and share your experience on your social media |
Please contact our technical support service by sending an e-mail to
@MarsGaming_
marsgaming
**** MarsGamingOfficial
| ****support@marsgaming.eu