SAMSUNG H3 3-in-1 Wireless Charging Station User Manual
- June 4, 2024
- Samsung
Table of Contents
3-in-1 Wireless Charging Station
User Manual
Model: H3
H3 3-in-1 Wireless Charging Station
Notice: to ensure the wireless charger work flawlessly, you’d better use the included QC 3.0 adapter and Type-C cable (If using an unqualified adapter or non-quick charging cable, the charger may not charge devices fast or may not charge 3 devices simultaneously. Worse still, it may get damaged)
Product Description
The 3-in-1 wireless charger, a compact charging station, powered by a single adapter, can charge 3 devices simultaneously. Just put your mobile phone, Apple Watch, and AirPods on when charging is needed, the wireless charger will automatically start. No more messy cords on the nightstand or desk. Simplify your life.
Indicator Instruction
- After the plugin, three indicators(Red, Green & Blue) all light on and go off after 2 seconds.
- The colors of the indicators from left to right are red, green, and blue.
- The red light turns on when charging the Apple watch; the Green light turns on when charging iPhone; the Blue light turns on when charging AirPods.
- Lights will automatically go off after charging for 30 seconds, to prevent continuous lights and night lights from disturbing your sleeping.
Applicable Devices
-Samsung Galaxy S22 Series/ S21 Series/ S20 Series
-Samsung Galaxy S8/ S8 Plus/ Note 8
-Samsung Galaxy S7/ S7 Edge/ S6 Edge Plus/Note 5
-iPhone 13 Series/12 Series/11/11 pro/11 Pro Max/XS/XS/Max/XR/X/8/8Plus
-More cell phones are compatible with QI wireless charge.
-Apple Airpods 2, AirPods Pro (Need to match wireless charging case)
-Apple Watch 7/6/5E/5/4/3/2
Product Specification
Phone Output: 15W/10W/7.5W/5W
iWatch Output: 3W
AirPods Output: 5W
Input Interface: Type-C port DC 5V 3A/9V 2A/12V 1.5A
Working frequency: 115-205KHz, 325KHz
Accessories List
1×3-in-1 Wireless Charger
1xType-C Power Cable
1 x 18W Adapter
1 xUser Guide
FCC warning:
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 20cm between the radiator & your body.
Please Note:
- The Watch Wireless Charging Area supports Apple Watch only.
- Please remove your phone case before charging if the thickness is greater than 3 mm.
- Only use a certified QC 3.0 Fast Charging Wall Adapter to power the device, do not plug it into the computer USB port.
- Please keep the charger away from water or any liquid.
- It is normal and safe to hear a humming noise when very close to the charger. It means that this wireless charger is adjusting its temperature to achieve a more efficient charging speed.
- If your device can not be fully charged, this may be due to high environmental temperature, please recharge after the temperature is lowered. Our charger has temperature control to safeguard your device when charging.