Bushnell 74-0001C Magnetic Boresighter Instruction Manual
- May 15, 2024
- Bushnell
Table of Contents
74-0001C Magnetic Boresighter
Instruction Manual
74-0001C Magnetic Boresighter
Conuratulations on your purchase of a BUSHNE-LL Magnetic Boruighter. This
boresightcr is a precision instrument construeted of the finest materials and
assembled by highly skilled craftsmen for a lifetime of trouble-f-ree use.
The boeesighter is designed to quickly get your rifle, handgun or shotgun “on
the paper”. It works well with riflescopes, HOLO sights, firearms with the
BOSS system, and open sights and firearms of any caliber. Final sighting in
should be done by shooting the firearm and fine-tuning the adjustments.
BEFORE BORESIGHTING YOUR SCOPE, MAKE SURE THAT THE FIREARM is UNlOADED AND THE
MUZZLE IS POINTED IN A SAFE DIRECTION.
- Using the Bulit -in magnet on the attach the boss singhter of the barrel. the lens on the test Sigh ld be at roughly the same Heighets the bell of the scope.
- Look through the scope at the scope at the boresi ghter’s to hair. this broMt1:iir s. This borether is desgined to work at alJ magnification lf al though lagherm agnlfication well see more detail.
- Adjust your crosshairs so that they point at the center of the grid.
- Remove the boresighter from the firearm,
- Shoot your firearm and make any final adjustments
- Once you have zeroed your rifle, you can record your zero for reference by writing down where the crosshairs point on the grid. This way, if you ever want to check your zero without going to the range or if you installa different scope on that firearm, you can quickly get to exactly where that rile shoots.
WARRANTY / REPAIR
Documents / Resources
|
Bushnell 74-0001C Magnetic
Boresighter
[pdf] Instruction Manual
74-0001C Magnetic Boresighter, 74-0001C, Magnetic Boresighter, Boresighter
---|---