LASER BK-685 ENC Bluetooth Headphones User Manual

June 13, 2024
Laser

LASER logo

User Manual

LASER BK-685 ENC Bluetooth Headphones

Bluetooth Over-Ear Headphones with ENC
HPS-HEAD30- Bk – 685

WHAT’S IN THE BOX

  • Wireless Headphones
  • USB-A to USB-C Charging Cable
  • 3.5mm Audio Cable
  • User Manual

SPECIFICATIONS

Wireless range 10m (without obstacles)
Frequency response 20Hz-20kHz
Microphone sensitivity 99d5±3
Speaker impedance 320
Speaker size 40mm
Charging time ≈ 2h
Playback time (50% volume) ≈ 50h

PRODUCT DIAGRAM

LASER BK-685 ENC Bluetooth Headphones - Product

FEATURES

  • Bluetooth version 5.3 EDR+BLE.
  • Supports BT calls and BT music
  • Built-in lithium-ion battery.
  • USB-C charging port,
  • Intelligent power saving (automatically powers off after 5 minutes of pairing time has lapsed).

INSTRUCTIONS

A. Charging Function

  • Connect the supplied USB cable to the headset and to a power adaptor (or a PC/laptop USB port). The red LED light will turn on when charging and will power off once the battery is full
  • When the battery is low, a voice prompt will sound

B. Wireless Bluetooth Function (Bluetooth Pairing Method):

  • Press/hold power key 2 seconds until red and blue LED flashes intermittently, entering the pairing mode.
  •  Turn on Bluetooth on your connecting device.
  • Choose the headset model name: HPS-HEAD30
  • The BT device will show Bluetooth icon and battery capacity of headset.
  • The icon is different based on your BT device.

C. Bluetooth Playing:

  • Press “ ” key once to play music.
    Press again to pause music.
    Press ” ” key to answer the call
    Press again to end the call.
    Press and hold “ ” key 2 seconds to reject incoming call
    Press and hold 2 seconds for voice assistant function when connected.

  • (a) Press and hold + key for next frack. Short press to increase volume. When the volume is adjusted to maximum, a “max volume” prompt is heard.

  • (b) Press and hold = key for previous song. Short press to decrease volume,

LASER BK-685 ENC Bluetooth Headphones - Product 3

  • Key (c) “ is power key. Press and hold 2 seconds t0 power on, and press and hold 3 seconds o power off.
  • (b)  3.5mm jack for AUX Mode. Connect AUX cable to mobile phone or computer. Bluetooth will turn off and enter AUX mode,

LASER BK-685 ENC Bluetooth Headphones - Product 4

CAUTIONS

  • Do not put the headphone in damp, or dusty environment or expose to long periods of heat or sunlight.
  • Adjust to comfortable volume, high volume may damage hearing.
  • Clean with soft, dry cloth
  • Recharge with compatible DC 5.0V charger.
  • Do not allow your device to get wet- liquids can cause serious damage,
  • Never attempt to disassemble and reassemble.
  • Avoid exposing your device to very cold or very hot temperatures (below 0°C or above 45°C)
  • Extreme temperatures can cause deforming of the device and reduce the charging capacity and life of your device.
  • Please retain instruction manual for future reference.

TROUBLESHOOTING

No power:

  • Check battery level and charge if required.
  • A USB wall adapter up to 5V/1A is recommended for charging
  • Try charging the headphone with a USB wall adapter (like a smart phone charger) instead of a laptop or computer.
  • Leave the headphone charging overnight and try in the morning

Problem Connecting to Bluetooth:

  • Place the headphone next o the smart device you are pairing to eg., Smartphone.
  • If the Bluetooth name “HPS-HEAD30” does not appear on the list of available devices, then try refreshing the list or searching again
  • Allow up to 5 minute for the device to appear on the Bluetooth list.
  • Make sure the headphone is in Bluetooth mode (default mode when turning on) before searching on your smart device,
  • lf the headphone is already connected to another smart device, it will need to be unpaired from that device first, or it will need to be out of Bluetooth connection range of that device before it can be connected to another.

Thank you for your purchase!

Laser Corporation is 100% Australian owned & operated. To get the most out of your product please read the user manual carefully and keep for future use.
For specific information relating to your product such as Spare Parts, FAQs, Warranty claims, and more, please scan the following QR code:

https://www.laserco.com.au/support

Visit our website
www.laserco.com.au

Check us out at
www.youtube.com/lasercoau

LASER logo

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals