BUFFALO CE208 Induction Cooker Instruction Manual

CE208 Induction Cooker
**Instruction Manual

Induction Cooker
Instruction manual**

Safety Instructions

• Position on a flat, stable surface.

• A service agent/qualified technician should carry out installation and any repairs if required. Do not remove any components on this product.

• Consult Local and National Standards to comply with the following:
  – Health and Safety at Work Legislation
  – BS EN Codes of Practice
  – Fire Precautions
  – IEE Wiring Regulations
  – Building Regulations

• Caution! Hot surface!

• DO NOT immerse the appliance in water.

• DO NOT leave the appliance unattended during operation.

• DO NOT move the appliance during cooking or with hot cookware on top of it.

• DO NOT use cookware with a diameter of less than 12cm.

• DO NOT place empty cookware on the appliance.

• DO NOT place any magnetic objects on the glass surface during operation.

• DO NOT place metal objects/utensils on the appliance as they may become hot during operation.

• People with a pacemaker fitted should not use the appliance and keep a minimum of 60cm from the appliance during operation.

• Always switch off and disconnect the power supply to the appliance when not in use.

• Not suitable for outdoor use.

• If the glass surface is cracked disconnect from the power supply and consult your BUFFALO agent or recommended qualified technician.

• Keep all packaging away from children. Dispose of the packaging in accordance to the regulations of local authorities.

• If the power cord is damaged, it must be replaced by a BUFFALO agent or a recommended qualified technician in order to avoid a hazard.

• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience or knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.

• Children should be supervised to ensure that they do not play with the appliance.

• BUFFALO recommends that this appliance should be periodically tested (at least annually) by a Competent Person. Testing should include, but not be limited to: Visual Inspection, Polarity Test, Earth Continuity, Insulation Continuity, and Functional Testing.

• BUFFALO recommends that this product is connected to a circuit protected by an appropriate RCD (Residual Current Device).

Introduction

Please take a few moments to carefully read through this manual. Correct maintenance and operation of this machine will provide the best possible performance from your BUFFALO product.

Pack Contents

The following is included:

• BUFFALO Induction Cooker
• Instruction manual

BUFFALO prides itself on quality and service, ensuring that at the time of unpacking the contents are supplied fully functional and free of damage. Should you find any damage as a result of transit, please contact your BUFFALO dealer immediately.

Installation

Maintain a distance of 15cm (6 inches) between the appliance and walls or other objects.

Induction Cooking

Induction cooking is a very efficient method of cooking as it reduces heat loss between the pan and the atmosphere by as much as 40%. This makes it extremely energy efficient, as well as offers immediate heat-up, unlike traditional heating methods which require time to get to temperature.
The Induction cooker works by creating a magnetic field within suitable cookware, which causes an instant build-up of heat to cook the food.

Cookware

Suitable cookware includes:

• All magnetic pans
• Mild steel or plain steel (black iron) pans
• Enamelled/non-enameled cast iron and iron pans
• Cookware diameter: 12cm – 20cm

Unsuitable cookware includes:

• Cookware with a diameter of less than 12cm
• Ceramic or glass cookware
• Stainless steel with no/weak magnetism, aluminum, bronze, or copper cookware unless marked as suitable for induction cooking
• Cookware with feet
• Cookware with a rounded bottom (e.g. wok)

Operation

1. Connect the appliance to the main power supply.

2. Place suitable cookware on the center of the glass plate.
   Note: Never place empty cookware on the appliance.

3. Turn the dial to the desired power as indicated on the display.

4. If the pan is removed or the wrong type of pan is used, the appliance will make a beeping noise and switch off after approximately 60 seconds.

Cleaning, Care & Maintenance

Disconnect from the power supply and allow the appliance to cool before cleaning.

• Use warm, soapy water and a damp cloth to clean the appliance.
• DO NOT use abrasive cleaners or pads.
• Dry thoroughly after cleaning.
• There is a removable air filter on the bottom of the appliance. Pull it out of its slot and clean with a vacuum cleaner.

Troubleshooting

A qualified technician should carry out repairs if required.

suitable for induction cooking such as Vogue Stainless Steel Range
0.00E+00| Unit has overheated| Ensure the ventilation filter (located underneath the unit) is dean and unblocked. Allow the unit to cool. If an error code still appears after the unit has cooled, contact a qualified engineer
0.00E+00| Pan being heated is empty, the temperature of the pan is too high| Remove the pan from the unit. Allow the unit to cool. Ensure the pan contains the product to be heated. If an error code still appears after the unit has cooled, contact a qualified engineer
0.00E+00| Power input has risen/fallen below unit operating limits| Switch off the unit. Allow the unit to cool. If an error code still appears after the unit has cooled, contact a qualified engineer

Technical Specifications

Model| Voltage| Power (Max.)| Power range| Dimensions hxwxdmm| Weight
---|---|---|---|---|---
CE208| 220-240V- 50/60Hz| 3000W| 500 – 3000W| 105 x 430 x 328| 5.6kg

Electrical Wiring

This appliance is supplied with a 3-pin BS1363 plug and lead.
The plug is to be connected to a suitable main socket.
This appliance is wired as follows:

• Live wire (coloured brown) to the terminal marked L
• Neutral wire (coloured blue) to the terminal marked N
• Earth wire (coloured green/yellow) to the terminal marked E

**** This appliance must be earthed.
If in doubt consult a qualified electrician.
Electrical isolation points must be kept clear of any obstructions. In the event of any emergency disconnection being required, they must be readily accessible.

Compliance

The WEEE logo on this product or its documentation indicates that the product must not be disposed of as household waste. To help prevent possible harm to human health and/or the environment, the product must be disposed of in an approved and environmentally safe recycling process. For further information on how to dispose of this product correctly, contact the product supplier, or the local authority responsible for waste disposal in your area.
BUFFALO parts have undergone strict product testing in order to comply with regulatory standards and specifications set by international, independent, and federal authorities.
**BUFFALO** products have been approved to carry the following symbol:

All rights reserved. No part of these instructions may be produced or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior written permission of BUFFALO.
Every effort is made to ensure all details are correct at the time of going to press, however, BUFFALO reserve the right to change specifications without notice.

DECLARATION OF CONFORMITY

Application of Territory Legislation &
Council Directives(s)| Low Voltage Directive (LVD) – 2014/35/EU
Electrical Equipment (Safety) Regulations 2016
EN 60335-1:2012 +A11:2014 +A13:2017 +A1:2019 +A14:2019 +A2:2019
EN 60335-2-36:2002 +A1: 2004 +A2: 2008 +A11:2012
EN 62233:2008
Electro-Magnetic Compatibility (EMC) Directive 2014/30/EU – recast of 2004/108/EC
Electromagnetic Compatibility Regulations 2016 (S.I. 2016/1091)
EN 55014-1:2017 +A11:2020
EN 55014-2:2015
EN IEC 61000-3-2:2019
EN 61000-3-3:2013 +A1:2019
| Restriction of Hazardous Substances Directive (RoHS) 2015/863 amending Annex II to
Directive 2011/65/EU
Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic
Equipment Regulations 2012 (S.I. 2012/3032)
Producer Name| Buffalo

I, the undersigned, hereby declare that the equipment specified above conforms to the above Territory Legislation, Directive(s) and Standard(s).

Date…………………
Signature………………….
Full Name……………………
Position…………………………
Producer Address …………………

23rd June 2022

|
Ashley Hooper| Eoghan Donnellan
Technical & Quality Manager| Commercial Manager/ Importer
Fourth Way,
Avonmouth,
Bristol,
BS11 8TB
United Kingdom| Unit 9003,
Blarney Business Park, Blarney, Co. Cork
Ireland Unit 9003,
Blarney Business Park,
Blarney, Co. Cork
Ireland

+44 (0)845 146 2887http://www.buffalo-appliances.com/
CE208_ML_A5_v6_2022/06/24

References

• Buffalo Home Page

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>