moonki MA-TWS66 True Wireless Stereo Earbuds User Manual
- June 11, 2024
- moonki
Table of Contents
moonki MA-TWS66 True Wireless Stereo Earbuds User Manual
PACKAGING CONTENT
- 2 Earbuds
- Micro USB cable
- Charging case
- Cap spare parts * 3
- User manual
- Warranty card
Wireless Bluetooth Stereo Earbuds
- Stereo or mono mode Headphone. You can choose between left, right earbuds or stereo playback.
- True Wireless Stereo Sound (TWS)
- Charging case with compact configuration.
Before using
Before starting to use this product you must remove the protective plastic covering the charging contacts of the earbuds.
Functioning
Charging Base
- 1. Before using the earbuds for the first time, fully charge the base. Connect to USB port charging to a USB cable, and at the other end of it to a suitable charger or a PC. The level of charge is indicated by 4 LED lights (each light indicates 25% of the total charge). When the 4 lights are power on, please disconnect the base from the power supply.
- The full charge of the base takes approximately 1 Hr.
- The base functions both as a carrying case and as a charger for the earbuds.
Recharging the earbuds with the case
- Before using the earbuds, you must fully charge the battery of the earbuds.
- Charging the earbuds takes between 1 and 2 Hr.
- When the battery is charging, a red LED will stay on on the earbuds. When charging is complete it will turn off.
- When the battery charge is very low, a notification will be heard every one minute indicating that the battery must be recharged. When this happens, proceed to recharge the battery following the instructions in the previous step.
- If the earbuds has not been used for a long time and has been discharged for a long time, the indicator LED may take a few minutes to turn on.
- If the earbuds is not used or if it is not recharged for a certain period of time, the headset will turn off.
Product Overview
Placement mode
-
Place the earbud on your ear
-
Rotate the earbud and make sure it makes good contact with your ear
-
Accommodate the earbud for comfort
Bluetooth pairing
Open the case. Remove the earbuds. They will quickly pair with each other.
Call
- With the earbuds connected to your cell phone you will be able to answer calls from the earbuds .
- The earbuds will play the ID of the incoming call. Press the multi-function button to answer, or press and hold to reject the call.
- Press the multi-function button while on a call to end the call. Doing so will return the earbuds to the previous working state.
- The call volume must be adjusted from the cell phone.
Music Playback
- Turn on the earbuds and pair them with your playing device.
- When there is an incoming call, press the multi-function button to answer, or press and hold to reject the call.
- Press the multi-function button twice to skip to the next track, or press it three times to go back to the previous track.
COMPATIBLE WITH: Mp3, Android, iPhone, iPod, iPad y Bluetooth
Parameters
- Bluetooth version. 5.0
- Range Distance: 10 mtrs
- Working Frequency (bluetooth): 2.402 Ghz – 2480 Ghz
- SignaltoNoiseRatio: > 75dB
- Impedance: 16 Ohm
- Input Voltage: DC5V
- Charging Time: Less than 2 Hrs
- Playback Time: Up to 4.5 Hrs
- Profile Compatible: A2DP, AVRCP1.4, HFP
CAUTION
- Do not use this product in the shower or in the rain.
- Keep away from WIFI Routers or other Bluetooth devices to avoid signal interference
- Use this product within the range of 10 mtrs and without obstacles in between (such as walls)
- In case of abnormal operation, disconnect the pairing, reset the earbuds and follow the steps for a new pairing again.
Made in RPC
Read User Manual Online (PDF format)
Loading......