ACROMA 6409BG Agen 9-Light Satinbrass Farmhouse LED Dry Rated Chandelier Instruction Manual

June 12, 2024
ACROMA

ACROMA 6409BG Agen 9-Light Satinbrass Farmhouse LED Dry Rated Chandelier Instruction Manual
ACROMA 6409BG Agen 9-Light Satinbrass Farmhouse LED Dry Rated
Chandelier

Safety Information

  1. For your protection and safety,carefully read and understand the information provided in this manual completely before attempting to assemble,install,or operate this product.Failure to do so could lead to electrical shock,fire,or other injuries that could be hazardous or even fatal.

  2. Before touching any wire,use a voltage tester to make sure it not live.

  3. When replacing fuses,turn off the main power firs.Make sure your hands and feet are dry,and place one hand behind your back to prevent electricity from making a complete circuit through your chest.
    Touch the plug fuse only by its insulated rim.Remove cartridge fuses with a fuse puller.

  4. Use tools with insulated handles and ladders made of wood or fiberglass.

  5. To protect children,place a safely cover over any unused outlets.

Warning iconDANGER: Before staring installation of this fixture or removal of a previous fixture,disconnect the power by turning off the circuit breaker,removing the fuse at the fuse box,or tripping the breaker that controls that circuit.Tape a sign to the panel warning others to leave the circuit alone while you work.

Warning iconCAUTION: CONSULT A QUALIFIED ELECTRICIAN IF YOU HAVE ANY ELECTRICAL QUESTIONS. lf you have any non- electrical questions about this fixture please contact our customer service via the distributor where you purchased this product from. We will be more than happy to assist.

READ AND SAVE THESE INSTRUCTIONS

TOOLS REQUIRED (NOT INCLUDED)

  • Phillips Screwdriver

  • Wire Stripper

  • **Pliers

**

  • Safety Goggles

  • **Electrical Tape

**

Assembly Instructions

Assembly Instructions

Assembly of this fixture will be accomplished by first determining the length of stem or chain required, attaching the mounting plate to the junction box, making all necessary electrical connections, hanging the fixture from the ceiling and then installing the fixture.

Safety Warning
Read wiring and grounding instruction and any additional directions. Turn power supply off during installation. If new wiring is required, consult a qualified electrician or local authorities for code requirements

HARDWARE INCLUDED

  • Mounting plate
    HARDWARE INCLUDED

  • Support screw(long) x 2
    HARDWARE INCLUDED

  • Outlet box screw(short) x
    HARDWARE INCLUDED

  • Hex nut x 2
    HARDWARE INCLUDED

  • **Green ground screw (on mounting plate)

**

  • **Wire connector x 3

**

  • Canopy
    HARDWARE INCLUDED

  • Chain end Loop x 8 Chain end ~Loop x 8

  • **Flat washer x 2

**

  • **Finial x 2

**

  • Chain
    HARDWARE INCLUDED

  • Socket sleeves x 9Socket sleeves ~ x 9
    HARDWARE INCLUDED

  • **Connector ringConnector ~ring

**

Installation Instructions

STEP 1
Installation Instructions

STEP 2
Use the chain end look to connect side hanging rods to the wheel and wiring chamber.

STEP 3
Installation Instructions

STEP 4
Installation Instructions

STEP 5
Connect the lanyard to the mounting bracket to help hold the fixture in place while making the wire connections
Installation Instructions

Installation Instructions

Warranty

ONE (1) YEAR WARRANTY

WHAT IS COVERED
The manufacturer warrants this fixture to be free from defects in materialsand workmanship for a period of one (1) year from date of purchase.The warranty applies only to the original consumer purchaser and only toproducts used in normal use and service.
If this product is found to be defective,the manufacturer’s only obligation,andyour exclusive remedy,is the repair or replacement of the product at themanufacturer’s discretion,provided that the product has not been damagedthrough misuse,abuse,accident,modifications,alteration,way not in accordancewith the instructions supplied with the product.This warranty shall not apply toa failure of the product as a result of an accident,misuse,abuse,negligence,alteration,faulty installation,or any other failure not relating to faulty materialor workmanship.
This warranty shall not apply to the finish on any portion of the product,suchas surface and/or weathering,as this is considered normal wear and tear.

WHAT IS NOT COVERED
The manufacturer does not warrant and specifically disclaims any warranty,whether expressed or implied, of fitness for a particular purpose, other thanthe warranty contained herein. The manufacturer specifically disclaims anyliability and shall not be liable for any consequential or incidental loss ordamage, including but not limited to any labor/expense costs involved in thereplacement or repair of said product

ACROMA logo

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

ACROMA User Manuals

Related Manuals