TRINITY MX Series MX LCD Program Card User Manual

TRINITY MX Series MX LCD Program Card

MX LCD program card is only applied to MX series brushless ESC produced by Trinity. Users can choose their desired parameters at any time.

Specification

• Dimension: 91mm54mm18mm (LWH)
• Weight: 68g
• Power supply: DC 5.0V~ 12.0V

How to connect the LCD program card

1. Disconnect the battery from the ESC;
2. Connect the data wire to the “PGM” port, then plug it into the socket marked with( )
3. Connect the battery to the ESC and turn on the ESC.
4. If the connection is correct. the following message(Turbo +Version+Date) will be displayed on the LCD screen. Press any buttons. the following message (Ready to connect ESC) will be shown on the LCD Screen. It signifies that the data connection between LCD and ESC is established. If the data connection between LCD and ESC is failed. the LCD Screen is always showing (Ready to connect ESC); Please check whether the signal wire is connected correctly and repeat steps 2,3.
5. If the connection is established successfully, the first programmable item will be displayed on the LCD screen. It’s ready to set the parameters now.
6. Note, Please strictly connect according to the above sequence. The sequence of step 2 and step 3 can not be reversed. Otherwise. the LCD program card will not work properly. Working as an individual device to program the ESC. the function of the button is as follows;
7. Menu, Change the programmable items circularly:
8. Value, Change the parameters of each programmable item circularly
9. Note that keeping  the “Menu” or “Value button holding can select the desired parameters quickly.
10. Reset, Return to the default settings
11. OK, Save the current parameters into the ESC. If you don’t press the”‘OK button. the customized settings will not be saved and updated in the ESC. If you just press the Menu button. the customized settings are just saved into the program card, not into the ESC. For example, First, enter the interface of a customized programmable item (e.g., cut-off voltage 3.2/cell): Secondly, press the ”Value·· button to select the desired parameters: Thirdly. press ‘”ok”‘ button to save the parameters into the ESC.

WARRANTY AND SERVICE

All Team Trinity products are held to the highest standards of manufacturing and quality. We guarantee this product to be free from defects and poor workmanship for a total of 30 Days from purchase. Some things that are not covered are damage due to traverse polarity. operation different from that specified in this manual. or damage due to impact. This is a list of other damages that are not covered under Team Trinity’s 30-day warranty

• Cut off/Shortened wires
• Damage to case
• Damage to PCB or damage due to incorrect soldering
• Damage due to water or excessive humidity

If you feel that your ESC is not working properly please make sure that it is your ESC that is causing the problem. If you send in your ESC it is tested to be normal. the owner will be subject to a service fee. If your repair is not covered under warranty. the owner will be issued a service fee as well as a repair/ replacement fee. To ensure fast service completely fill out all warranty paperwork that can be found at www.teamtrinity.com. Please call us first at (407)-960-5080 Monday and Thursday between 8 a.m. and 6 p.m. so we can try to diagnose and possibly resolve the issue.

• Trincorp LLC 155 E. Wildmere Ave Suite 1001 Longwood, Florida 32750

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>