TRINITY 80 QT Stainless Steel Cooler Owner’s Manual
- June 7, 2024
- TRINITY
Table of Contents
OWNER’S MANUAL
TRINITY 80 QT STAINLESS STEEL COOLER
W/ SHELF
Model # TXK-0802
Important
Intelligent Instructions
FOR QUICK & EASY 3D ASSEMBLY INSTRUCTIONS
DOWNLOAD THE FREE APP
PARTS LIST
Your TRINITY Stainless Steel Cooler should include the following parts. Please inspect box contents to ensure you have received all components.
If you are missing any parts, need assistance with assembly or have questions, please contact TRINITY Customer Service: 800.985.5506 or customerservice@trinityii.com. Parts can also be requested online via “Contact Us” section at www.trinityii.com.
You will need a Phillips screwdriver for assembly which is not provided.
A B C D
TUB (1) LID (1) SHELF (1) LEG (4)
E F G
SMALL SCREW (10) HANDLE (2) LARGE SCREW (12)
H I
CAP CATCHER (1) BOTTLE OPENER (1)
J K
DRAIN PLUG (1) LOCKING CASTER (2)
L M
NON-LOCKING CASTER (2) WRENCH (1)
1
ASSEMBLY INSTRUCTIONS
STEP 1
Align HANDLES (F) on each side of TUB (A). Attach HANDLE (F) with LARGE SCREW (G). Make sure to tighten securely. HANDLES (F) can be attached either angled up or down based on your preference.
STEP 2
Turn Cooler upside down. Align LEG (D) with holes on bottom of TUB (A). Attach LEG (D) with SMALL SCREWS (E). Make sure to tighten securely.
2
STEP 3
Align holes in SHELF (C) with bottom of LEG (D), making sure that Shelf Lip is facing TUB (A). Screw LOCKING CASTER (K) into bottom of LEG (D), securing SHELF (C) in between. Make sure LOCKING CASTERS (K) are installed on the same side. Screw NON-LOCKING CASTER (L) into bottom of LEG (D), securing SHELF (C) in between. Repeat for the other NON-LOCKING CASTER (L).
Tighten CASTERS (K, L) with the provided WRENCH (M).
Use provided caster wrench to tighten completely. Failure to do as instructed could result in caster stem breaking.
STEP 4
Turn the Cooler right side up.
Attach BOTTLE OPENER (I) to TUB (A) using SMALL SCREWS (E).
Attach CAP CATCHER (H) to TUB (A) by sliding it down on metal notch.
3
STEP 5
Unscrew DRAIN PLUG (J) assembly. Insert DRAIN PLUG (J) through the opening in TUB (A) from the inside. Make sure the rubber seal is on the inside of TUB (A).
From the outside , slide the Washer on first, then the second Washer with Chain, and then screw on the Nut. Be sure not to overtighten. Once DRAIN PLUG (J) is in place, screw on the Cap.
STEP 6
Set LID (B) on top of TUB (A).
Clean the inside of Cooler thoroughly before use.
4
SERVICE PARTS LIST – TXK-0802
TRINITY Customer Service provides the following replacement parts:
Part Number Description
- PBR-17-002-3115 Cooler Lid
- AMA-05-005-0150 Lid Knob
- XSV-01-010-0530 Knob Screw
- XST-18-015-3115 Cooler Tub
- XST-02-004-0001 Bottle Opener
- XST-02-005-0002 Cap Catcher
- ZSV-99-012-3010 Locking Caster
- XXX-97-002-0001 Wrench
- ZSV-99-011-3010 Non-Locking Caster
- PBR-03-028-2913 Shelf
- PBR-04-022-1625 Leg
- XSV-01-010-0416 Small Screw
- CGL-02-003-0001 Drain Plug
- XSV-05-001-0675 Handle
- XSV-01-010-0615 Large Screw
5
WARNINGS
- Read and understand all instructions. Failure to follow all instructions may result in injury and/or damage.
- The warnings, cautions, and instructions discussed in this manual cannot cover all possible conditions or situations that may occur. The user must always be aware of their environment and ensure that they use the product in a safe and responsible manner.
- Use the provided caster wrench to tighten completely. Failure to do as instructed could result in the caster stem breaking thereby causing the cooler to collapse.
- Do NOT modify the product in any way. Unauthorized modification may impair the function and/or safety of the product, and may affect the life of the product. Any modifications will void product warranty.
- Check for damaged parts. Before using this product, carefully check that all parts are in good condition, and that the product will operate properly and perform its intended function. Check for damaged parts and any other conditions that may affect the operation of this product. Replace damaged or worn parts, and never use this product with a damaged part.
- Lift cooler tub by side handles ONLY.
- Do NOT let children climb or play in the tub or on the shelf.
- Do NOT overload the product.
Volume Capacity | 20 gallons / 80 qt |
---|---|
Weight capacity per shelf (evenly distributed) | 75 lb |
Total weight capacity (evenly distributed) | 225 lb |
- Lock the casters when leaving cooler in stationary position.
- Do NOT push cooler with cart on uneven surface. Cooler tub may detach from the cart.
6
CARE AND MAINTENANCE
-
Remember to drain remaining water and remove un-melted ice after use. Wipe dry for storage.
-
Avoid harsh, abrasive cleaners, and other corrosive chemicals.
-
Do not use scouring pad for cleaning.
-
Keep dry and avoid damp environments.
-
Use a quality stainless steel cleaner and follow instructions that come with the cleaner.
Wipe ALONG the grain (NOT against). -
Cooler should not be left out unprotected in the elements. A protective Cooler Cover (UBK-24-001-3519) is available as an accessory through www.trinityii.com website.
7
PRODUCT REGISTRATION
Thank you for purchasing a TRINITY Stainless Steel Cooler. In order to register your product and receive streamlined customer service, please fill out the following Product Registration Form and (1) fax the form to 310.347.4134 (2) complete the Product Registration Form online at www.trinityii.com or (3) scan and email the form to customerservice@trinityii.com. Include a copy of your original receipt with your submission.
First Name: __ Last Name:__
Address: ____
City: ___ State: __ Zip Code:____
Email Address: ____ Phone: ____
Product Model #: _ _TXK-0802 Purchase Date: __/ __/___
Location of Purchase: ___
Please rate the importance of each feature (1=least important; 10=most important)
Quality _ Price Size/Capacity Appearance Other __
How did you hear about our product?
Magazine Ad Catalog Salesperson Word of Mouth
Internet Store Display Other
Marital Status: Single Married
Household Income: Below $50,000 $50,000-$150,000 $150,000+
Education: High School College Graduate School
Primary Residence: Own Rent
Comments/Suggestions:
8
9
1 YEAR LIMITED WARRANTY
TRINITY Stainless Steel Cooler
Model # TXK-0802
Trinity International Industries (“Trinity”) warrants to the original consumer purchaser (“Purchaser”) of the TRINITY Stainless Steel Cooler (“Product”) that each Product shall be free from defects in workmanship and materials for a period of 1 year from the date of original purchase. Trinity’s obligation under this warranty shall be limited to repair or replacement of, or adequate compensation for the Product which shall not be greater than the amount of the purchase price of the Product, at the option of Trinity, during the warranty period. All replaced parts and Products become the property of Trinity and must be returned to Trinity.
This warranty excludes normal wear and tear of the Product and its parts or components, and damage arising from any of the following: negligent use or misuse of the Product, use contrary to this User’s Manual, or alteration by any one other than Trinity. The warranty period of 1 year shall not be extended or renewed by the repair or replacement of, or compensation for, the Product. Any warranty implied by applicable law is limited in duration to one year from the date of purchase and is subject to the same conditions and limitations as is provided for our express warranty.
Except as set forth herein, and to the extent of applicable there are no warranties on this Product either express or implied, and Trinity disclaims all warranties including, but not limited to, any implied warranties of merchantability, infringement or fitness for a particular purpose. No warranty or guarantee given by any person, firm, or corporation with respect to this product shall be binding on Trinity.
If your Product is defective or otherwise requires service or parts, please call TRINITY Customer Service tollfree at 800-985-5506, between 5:00 a.m. and 5:00 p.m., PST. Please tell us which model you purchased, the date of the purchase, and the problem with your Product. A copy of your original purchase receipt must accompany your service request.
LIMITATION OF REMEDIES AND LIABILITY
Trinity (and its employees, officers, members, managers, affiliates and assigns) shall not be liable for any incidental, consequential, special, indirect, remote, special or punitive damages for breach of any warranty, express or implied, including, but not limited to, lost profits, lost savings, loss of anticipated benefits and attorneys’ fees, which arise out of the purchase, use or inability to use the Product, whether arising out of contract, negligence, strict tort, product liability, or any other legal theory on which a claim is based. As noted above, to the extent damages are allowed by our express warranty or by applicable law, those damages may not exceed the purchase price paid for the Product. Without limiting the foregoing Purchaser assumes all risk and liability for loss, damage or injury to Purchaser and Purchaser’s property and to others and their property arising out of the use, misuse, or inability to use this Product. This limited warranty shall not extend to anyone other than the original purchaser of this product, is nontransferable and states your exclusive remedy.
Some states do not allow the exclusion or limitation of incidental, consequential, special, or punitive damages, so the above limitation or exclusion may not apply to you. The above warranty gives you specific legal rights, and you may have other rights which vary from state to state
10
CONTACT US
QUESTIONS? NEED PARTS?
WE ARE HERE TO HELP!
**Please feel free to contact us. There are no questions too small, or any problems too big. We’re committed to providing our customers with the highest level of service.**
TRINITY Customer Service
TEL: 800.985.5506
FAX: 310.347.4134
EMAIL:customerservice@trinityii.com
Monday through Friday
5:00 AM – 5:00 PM (PST)
Documents / Resources
|
TRINITY 80 QT Stainless Steel
Cooler
[pdf] Owner's Manual
80 QT Stainless Steel Cooler, TXK-0802
---|---