TRINITY TR-4167S WILDCAT XX Stage 5 Slip On Installation Guide
- June 3, 2024
- TRINITY
Table of Contents
TR-4167S – WILDCAT XX STAGE 5 SLIP ON
INSTALLATION INSTRUCTIONS
TR-4167S WILDCAT XX Stage 5 Slip On
- Remove rear plastic frame protector (4 bolts)
- Remove silver heat guard (9 bolts)
- Remove the (3) nuts and bolts holding the muffler to the chassis
- Remove the (4) springs holding the muffler to the header. Remove the muffler from vehicle making sure not to lose and of the rubber grommets under the silencer bracket.
- Bolt on the two billet muffler mounts to the steel mounting plate provided. Snug up the bolts on the two brackets and then bolt the plate to the chassis where the stock muffler mounted. Be sure to use the stock rubber grommets.
- Bolt the bell shaped 4-bolt pipe to the muffler using the M8 button head bolts provided. Slip the muffler into place and attach with the supplied springs. Make sure muffler is positioned correctly and tighten muffler clamp bolts.
- Torque all mounting hardware to OEM specifications. All mounting hardware should be re-torqued following the first couple hours of riding.
- Install large Trinity back shield plate with supplied (4) 3/8-24 x 5/8” button head bolts.
- Before starting the vehicle, clean all stainless steel sections of the exhaust system with carb cleaner, brake cleaner, or stainless steel cleaner to remove all oil and finger prints from installation.
WARNING
* Trinity Racing exhaust systems will require adjustment to OEM fuel
settings such as jetting changes or installation of an EF I programmer.
Trinity Racing will not be held responsible for damages that occur during
operation of your vehicle under improper fuel settings. Ultimately, it is the
responsibility of the owner/rider to adjust fuel settings to specific riding
conditions and elevation changes before riding.
Inspection of the muffler packing is recommended following every 15 hours of runtime. Failure to maintain muffler packing will result in power loss, increased sound output, and damage to the muffler body or muffler components.
Trinity Racing exhausts systems are designed for high performance
applications and are legal for closed course competition only. This product is
not applicable nor intended for use on emissions controlled street, highway,
or off-road vehicles.