Harry Potter 93272 V4 Colour Changing Mood Light Instruction Manual

Harry Potter 93272 V4 Colour Changing Mood Light

Product Information
The Harry Potter Mood Light is a potion bottle-shaped lamp that creates a magical ambiance in any room. It is designed to provide years of trouble-free operation and enjoyment. The lamp comes with a cork and an instruction manual.

Caution

1. For cleaning, use only a soft cloth. Do not use alcohol or chemical lacquer.
2. Remove the batteries before cleaning.
3. Keep bags and packing material out of reach of children and animals.
4. Do not remove the cover or touch electrical parts inside to reduce the risk of electric shock.
5. Avoid placing the mood light in direct sunlight, dusty areas, or hot/humid environments.
6. The mood light is intended for indoor use only.

Product Usage Instructions
Operation – Cork

1. Remove the cork from the plastic bag.
2. Ensure the potion bottle is clean and dry before placing the cork on top of the bottle.
3. If condensation appears on the bottle, remove the cork temporarily to allow air and condensation to dissipate. Replace the cork when the bottle is clear.

Operation – Batteries

1. Loosen the screw on the battery cover until roughly half is protruding, then pull to remove the battery cover.
2. Insert 3 x 1.5v AA alkaline batteries (not included) into the battery compartment, ensuring they are inserted correctly.
3. Screw the battery cover back onto the base unit securely to prevent access by small children.
4. Slide the ON/OFF button in the appropriate direction to turn the light on or off.
5. To change the batteries, follow steps 1-2, removing the used batteries and disposing of them safely and securely.

Note: This product is not a toy. Please dispose of the product at a designated collection point when no longer in use. Contact your local authority for information on recycling options.

WELCOME
We have taken great care to make sure that your Harry Potter potion lamp mood light was in perfect working order when it left our factory. It has been designed to give you many years of enjoyment and trouble-free operation. Read this manual before operating this unit to become familiar with its features and obtain the performance that will bring you continued enjoyment for many years. Please read the manual thoroughly before using this device. If the device is damaged in transit, do not install or use it and contact your dealer. Keep this manual for future use.

In the box

• 1 x Harry Potter potion lamp.
• 1 x Instruction manual.
• 1 x Cork.

CAUTION

1. For cleaning: use only a soft cloth. Never use alcohol or chemical lacquer.
2. Remove the batteries before cleaning.
3. Bags and packing material should be kept out of reach of children and animals.
4. To reduce the risk of electric shock, do not remove the cover and touch the electrical parts inside.
5. Do not place the mood light in direct sunlight, dusty areas, or hot/humid environments.
6. The mood light is intended for indoor use only.

OPERATION – CORK
In the box, you will find a cork in a plastic bag. Please remove the cork from the bag ready for use and dispose of the bag carefully. Please ensure the potion bottle is free from dirt and dampness and then place the cork on the top of the bottle. Please note, if the bottle shows condensation at any time, please remove the cork for a while to allow the air and condensation to dissipate and then replace it when clear.

OPERATION – BATTERIES

1. Begin to loosen the screw until roughly half is protruding, then pull to remove the battery cover (Fig.1). Insert 3 x 1.5v AA alkaline batteries (not supplied) into the battery compartment. Ensure batteries are inserted correctly.
2. Securely screw the battery cover back onto the base unit to prevent access to the batteries by a small child.
3. Slide the ON/OFF button (Fig.1) in the appropriate direction to turn the light on or off.
4. To change the batteries, follow steps 1-2 with the exception of removing the used batteries from the unit and disposing of them safely and securely, ensuring they are not accessible to small children.

WARNING! This is not a toy.

BATTERY INSTRUCTIONS

Requires 3 X AA, 1.5V batteries (not included)

HOW TO INSERT BATTERIES

Unscrew the battery cover using a screwdriver. Insert fresh batteries following the polarity marked on the product. Replace the cover and secure it with a screwdriver. Different types of batteries (i.e. alkaline and Zinc) or new and used batteries are not to be mixed. Only batteries of the same equivalent type as recommended are to be used. Batteries are to be inserted with the correct polarity. Exhausted batteries are to be removed from the product. If using rechargeable batteries, charge them under adult supervision and remove them before charging. Non-rechargeable batteries are not to be recharged. Rechargeable batteries are to be removed from the product before being charged. The supply terminals are not to be short-circuited. Do not throw batteries into a fire. Batteries should never be left in the product when not in use for a long period of time. For indoor use only. WEEE products should be disposed of by handing it over at a designated collection point. For more information about where you can drop off your waste product for recycling please contact your local authority.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>