Trinity DSC WS4985 Flood Sensor User Guide
- June 5, 2024
- TRINITY
Table of Contents
Trinity DSC WS4985 Flood Sensor User Guide
OVERVIEW
The Flood Sensor monitors and provides early warnings of the ambient temperature and detects wet/dry flood conditions which will automatically turn on or off devices in response to too much or too little water.
Receive instant notifications through your Alarm.com app when there are any water changes before damage occurs.
REQUIREMENTS
Z-Wave Network
Compatible Z-W ave light devices or appliance modules and Z-W ave Hub or
Controller.
Mobile App
Download the latest Alarm.com Mobile App for iOS or Android (version 4. 4. 1).
Updated Firmware Version
- GC2 panel 1.14 or later
- GC3 panel 3.1 or later
DEVICE FEATURES
- 350 ft range
- Probe style water sensor for water level applications
- 3 minute delay allows for adjustment of water levels without sending a premature or false alert
- Wired probe allows for optimal positioning of the transmitter
BASIC OPERATION
Sends a flood alarm to the panel when water has been detected by the sensor probe
FLOOD CONDITIONS
Once the sensor probe detects the presence of water for 3 minutes, the integral transmitter will send a wet alarm transmission to the security/control panel. The probe will also send a restore (dry) report when the presence of liquid is no longer detected by the flood probe for 3 minutes.
For flood reporting, the sensor requires the installation of the supplied external flood probe. The sensor is capable of detecting clean or dirty fresh water, salt water, or tap water.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>