DoorBird D21X Light Push Buttons Installation Guide
- June 6, 2024
- DoorBird
Table of Contents
D21X Light Push Buttons
Installation Guide
INSTALLATION D21X LIGHT PUSH BUTTONS
INSTALLATION D21X LICHTTASTER
D21x rectangular light push button
D21x rechteckiger Lichttaster
Make sure that the light switch is aligned upwards according to the „UP“
marking and surrounded by the silicone seal.
Plug the enclosed yellow cable into the „Switch“ connection on the light
switch and then connect it to the yellow cable of the main unit.
The „Light Switch“ connection is a potential-free contact that can be used,
for example, to control a time relay (max. 24 VDC/VAC, 1 A) to switch the
staircase lighting. Use the enclosed pink cable for this purpose.
The round light switch provides a connection for the power supply of the
integrated LED of the button (12-24 VDC / VAC) and an open/closed potential-
free contact, which can be used e.g. for the control of a time relay (max. 24
VDC / VAC, 1 A) to switch the staircase lighting.
REL NO: Normally open.
REL NC: Normally closed.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>