KOSPET 2A4WC-TANK-M2 Tank M2 Smartwatch User Manual
- June 13, 2024
- KOSPET
Table of Contents
- KOSPET 2A4WC-TANK-M2 Tank M2 Smartwatch
- Product Information
- Packing List
- Charging Tips
- Pairing
- About Watch Keys
- Audio Settings
- Sports Modes with Smart Recognition
- Quality Warranty
- Key safety Tips
- About Special Substancesin the Product
- FCC Warning
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
KOSPET 2A4WC-TANK-M2 Tank M2 Smartwatch
Product Information
- Packing List: Watch (Strap Included), Magnetic Charging Base, Protective Film, User Manual
- Product Name: KOSPET
- User Manual: KOSPET User Manual
Packing List
- Watch (Strap Included)
- Magnetic Charging Base
- Protective Film
- User Manual
About the Watch
- Power Key
- Sports Key
- Charging Port
- Heart Rate Sensor
- Air Pressure Hole
- Speaker
Charging Tips
- Please use chargers with an output power of 5V/500mAh and above to fully charge the watch before using it.
- Please keep the magnetic charging base away from any metal conductor to avoid a short circuit.
Pairing
App
- Three Alternative Ways to Download the App
- Use your smartphone to scan the QR code below to download and install the App.
- Enter “KOSPET FIT” in Apple Store or Google Store to download the App.
- The smartwatch can also be paired via Glory Fit. Scan the QR code below or enter “Glory Fit” in Apple Store or Google Store to download the App.
Pair as Follows
- Turn on KOSPET FIT and grant all permissions. Register and log in to the APP.
- Tap “Connecting Device” in Device and select the corresponding watch model in “Searching”.
- Pair the watch and allow it to receive notifications from your phone as requested by the App.
- Select messages and notifications that need notifying.
- Once the watch is paired, more customized settings are enabled in the App.
About Watch Keys
Power key:
- Press and hold the power key for 3 seconds to turn on/off the watch.
- Short press the power key to return to the previous menu.
- Short press the power key to turn on/off the display.
Sports Key:
- Short press to access Sports Modes.
- Press and hold for 3 seconds to end sports mode and save sports record.
Return key:
- Return to the previous menu.
Audio Settings
Set Bluetooth Calling:
- Enter Settings and tap “ ” to enable (or disable) Bluetooth Calling.
- Tap “Bluetooth Call” in the App and sync Contact to the watch. A maximum of 100 contacts can be transferred to the App.
- Receive phone calls from your phone.
- Make phone calls from your phone on the watch.
Set Multimedia Audio
- Enter Settings and select “Sound & Vibration” to enable (or disable) media audio, which allows the music player of the watch to play music from your compatible phone.
- Note: Once the media audio is turned on, all multimedia audio from your compatible phone will be played on the watch.
Settings on Watch Faces & Themes
-
Set Watch Faces
Press and hold the watch face for 2 seconds to quickly switch between watch faces. More watch faces can be downloaded and customized in the App. -
Always-on Display
- The watch can display time continuously when its always-on display is on.
- Set Watch Faces for Always-on Display
-
Set Watch Menu
Sports Modes with Smart Recognition
- The watch enables smart recognition of 4 sports — walking, running, elliptical and rower.
- Walking can be activated by a continuous walk for 10 minutes.
- The elliptical can be activated by continuous exercises for 3 minutes on an elliptical trainer.
- Rower can be activated by continuous exercises for 3 minutes on a rowing machine.
Quality Warranty
- To lean about our latest warranty policy, please visit KOSPET official website (https://kospet.com/pages/returns-refund-policy) for our Returns & Refund Policy.
- Official After-sales Email: after-sales@kospet.com
FAQ:
- Enter KOSPET FIT and tap Help to view FAQ.
To Download Electronic User Manual
Scan the QR code below to enter KOSPET Official Community and download the
electronic user manual.
Key safety Tips
- Temperature condition for normal work of the smartwatch is-20 ºC ~+50; Temperature condition for storage (accessories included) is -40ºC~+70ºC. Please be noted that extreme temperatures may damage the device and cause malfunctions.
- Do not expose the device to extremely high-temperature environments like scorching sun rays or around high-temperature devices like heaters, ovens, microwave ovens, or water heaters. High-temperature environments may cause battery explosions or other safety accidents.
- The device includes an irremovable lithium-polymer battery, so non-professionals are not allowed to disassemble it in case of a safety accident.
- About product waterproof performance: The water-resistant capacity of all our products is tested under IEC 529 and U.S. MIL-STD-810H. Each smartwatch has passed the static waterproof testing before launch. Dynamic waterproof, which functions when users wear the smartwatch for swimming and diving, varies considerably in water quality, water temperatures and water pressure. Considering different using habits, internal parts of the smartwatch may experience wear and tear to some extent, affecting its sealing performance. In the long run, there is likely a risk of submersion. Hence, you can wear and use the smartwatch during swimming and diving, but avoid wearing it in a sauna room or for a hot shower.
- Our products do not belong to medical apparatus. Therefore, the heart rate, blood pressure and other health data collected by it are only for reference rather than clinical basis.
About Special Substancesin the Product
- This table is prepared in accordance with the provisions of SJT 11364.
- O: Symbolizes that content of a hazardous substance of all homogeneous materials in the particular part is lower than limits required in accordance with GB/T 26572.
- X: Symbolizes that content of a hazardous substance of at least one homogeneous material in the particular part is slightly higher than limits required in accordance with GB/T 26572. Although no mature alternative is yet available in the industry, the product still meets RoHS requirements for environmental protection.
Power and Frequency
Disclaimer
This user manual is published by KOSPET which owns the right of final
interpretation. We may make necessary changes to this manual due to
typographical errors or inaccurate up-to-date information. Necessary
adjustments may also be made in product appearance or software anytime without
notice. In case of major software and hardware upgrades, this manual will be
altered together with the newly improved products. All pictures for describing
functions are for reference only.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter.
Shenzhen Kospet Technology Company Limited
Add: Room 2201, Unite E, NO.7, Qingquan Road, Fukang community, Longhua
street, Longhua District, Shenzhen City, China.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>