AO-EVDBL-019 Laser 3 In 1 Bluetooth Audio Bundle User Manual

AO-EVDBL-019 Laser 3 In 1 Bluetooth Audio Bundle

Product Information

3 in 1 Audio Bundle
Model: AO-EVDBL-019

Headphones

Controls and Ports:

• Play/Pause button
• Indicator light
• USB-C Charging port
• 3.5mm Aux port
• Microphone

Charging Instructions:
Fully charge the headphones before first use. Switch off headphones before recharging. Disconnect the cable when fully charged.

1. Use the supplied cable.
2. Connect the USB-C jack to the headphones.
3. Connect the other end to a USB power source.
4. The indicator light will turn red when charging; it will turn off when charging is done.

A USB power adaptor (5V 1A, not included) is recommended for charging, or a PC/laptop USB port can be used.

• Fully charge the headphones before first use.
• Switch off headphones before recharging.
• Disconnect the cable when fully charged.

Use the supplied cable. Connect the USB-C jack to the headphones. Connect the other end to a USB power source. The indicator light will turn red when charging; it will turn off when charging is done. A USB power adaptor (5V 1A, not included) is recommended for charging, or a PC/laptop USB port can be used.

Bluetooth Pairing:

1. Turn on the headphones by pressing and holding the Play/Pause button for 3 seconds.
2. Enable Bluetooth on your connecting device. It will search for nearby Bluetooth devices.
3. Select “AO-EVDBL-H”. If “AO-EVDBL-H” does not appear on your connecting device’s screen, try again from the beginning of step 1.
4. Audio played on your connected device can now be heard through the headphones.

Basic Operations

• Power On/Off: Press and hold the Play/Pause button for 3 seconds to turn on or off.
• Play/Pause music: Press the Play/Pause button to play or pause the music.
• Volume Up/Down: Press the + or – button to increase or decrease the volume.
• Select the next/previous Song: When listening to music, double press the + button to skip to the next song. Double press the – button to skip to the beginning of the song; double press again to skip to the previous song.
• Answer/Hang Up phone call: When there is an incoming call, press the Play/Pause button to answer the call. Press again to end the call.
• Reject phone call: When there is an incoming call, long press  the Play/Pause button to reject the call.
• Activate the voice assistant: Double press the Play/Pause button to activate voice assistant. Double press again to quit.
• Disconnecting/Unpairing

1. To disconnect, turn off your connected device’s Bluetooth or the headphones.
2. To unpair (remove the connection entirely), go to your connected device’s Bluetooth settings, find the headphones on the list of paired devices, and select “Forget” or “Unpair”.

• The headphones only connect to one device at a time.

To disconnect, turn off your connected device’s Bluetooth or the headphones. To unpair (remove the connection entirely), go to your connected device’s Bluetooth settings, find the headphones on the list of paired devices, and select Forget or Unpair. The headphones only connect to one device at a time.

AUX Input:

1. Plug one end of the auxiliary cable (3.5mm audio cable; not supplied) into the headphone jack of the external device.
2. Plug the other end to the AUX port of the headphones.
3. Start playing music from the external device.

Specifications

• Bluetooth version: v5.3
• Battery capacity: 200mAh
• Effective distance: 10M
• Play time: Up to 20 hours
• Charging time: Approximately 2 Hours

Earbuds

Controls and Ports:

• Case indicator light
• USB-C Charging Port
• Tap area
• Earbuds indicator light

Charging Instructions:
Fully charge the case and the earbuds before first use. Recharge the earbuds while the case is closed. Disconnect the cable when fully charged.

1. Use the supplied cable.
2. Connect the USB-C jack to the case.
3. Connect the other end to a USB power source.
4. The LEDs on the case and earbuds will flash when charging; they will turn off when charging is done.

Charging

• Fully charge the case and the earbuds before first use.
• Recharge the earbuds while the case is closed.
• Disconnect the cable when fully charged.

Use the supplied cable. Connect the USB-C jack to the case. Connect the other end to a USB power source. A USB power adaptor (5V 1A, not included) is recommended for charging, or a PC/laptop USB port can be used. When charging, the LEDs on the case and earbuds will flash; they will turn off when charging is done.

Basic Operations
Power On/Off

Method 1:
Open the charging case and remove the earbuds to turn them on automatically. Place the earbuds into the charging case and close it to automatically turn them off.

Method 2:
Press and hold the button for 3 seconds to turn on. Press and hold the button for 5 seconds to turn off. Play/Pause music Tap the left/right earbud twice to play or pause the music.

Play/Pause music
Tap the left/right earbud twice to play or pause the music.

Volume Up/Down
Double tap the left earbud to decrease the volume. Double tap the right earbud to increase the volume.

Select the next/previous Song
Tap the left earbud 3 times to go back to the beginning of the song and then quickly press 3 times again to skip to the previous song. Tap the right earbud 3 times to skip to the next song.

Answer/Hang Up phone call
When there is an incoming call. Tap the left or right earbud twice to answer the call. Tap twice again to end the call.

Reject
When there is an incoming call, press and hold the left/right earbud to reject the call.

Activate the voice assistant
Press and hold the left/right earbud for 2 seconds to activate voice assistant. Press and hold for 2 seconds to quit the voice assistant.

Bluetooth

Pairing

1. Turn on the earbuds.
2. Remove the earbuds from the box and wait for a few seconds until the two earbuds pair up (right LED flashes).
3. Once paired, enable Bluetooth on your connecting device. It will search for nearby Bluetooth devices.
4. Select “AO-EVDBL-T”.
   • If “AO-EVDBL-T” does not appear on your connecting device’s screen, try again from the beginning of step 1.
5. Now, audio you play on your connected device should come through the earbuds.

Disconnecting/Unpairing:

1. To disconnect, turn off your connected device’s Bluetooth or the earbuds.
2. To unpair (remove the connection entirely), go to your connected device’s Bluetooth settings, find the earbuds on the list of paired devices, and select “Forget” or “Unpair”.
   •  The earbuds only connects to one device at a time.

Specifications
Bluetooth version: v5.3
Playtime: 2-3 hours per charge
Working Range: 10m
Case’s battery capacity: 200mAh
Earbud’s battery capacity: 30mAh
Charge Time: about 2 hours

WHAT’S IN THE BOX

• Headphones
• Earbuds
• Speaker
• USB-C charging cable
• User manual

SPEAKER

Controls and Ports

Blue indicator light:
Flashing quickly: waiting for pairing
Flashing slowing: Music playing
Always on: Music on pause

Charging

• Fully charge the speaker before first use.
• Recharge the speaker when it is switched off.
• Disconnect the cable when fully charged.
  1. Lift the rubber flap next to the Power button.
  2. Use the supplied cable. Connect the USB-C jack to the speaker. Connect the other end to a USB power source.

A USB power adaptor (5V 1A, not included) is recommended for charging, or a PC/laptop USB port can be used.

Basic Operations
Power On/Off
Press and hold the On/Off button for 3 seconds to turn on or off.

Play/Pause music
Press the Power button to play or pause the music.

Volume Up/Down
Use the connected device to control the volume.

Answer/Hang up
When there is an incoming call. Press the Power button to answer the call. Press again to end the call.

Reject
When there is an incoming call, long press the Power button to reject the call.

Bluetooth
Pairing

1. Turn on the speaker.
2. Enable Bluetooth on your connecting device. It will search for nearby Bluetooth devices.
3. Select “AO-EVDBL-S”.
   • If “AO-EVDBL-S” does not appear on your connecting device’s  screen, try again from the beginning of step 1.
4. Now, audio you play on your connected device should come through the speaker.

Disconnecting/Unpairing:

1. To disconnect, turn off your connected device’s Bluetooth or the speaker.
2. To unpair (remove the connection entirely), go to your connected device’s Bluetooth settings, find the speaker on the list of paired devices, and select “Forget” or “Unpair”.

The speaker only connects to one device at a time.

Bluetooth True Wireless Stereo (TWS) Connection
Pair two AO-EVDBL-019 speakers to create a stereo experience (dependent on source), with one as the left channel and the other as the right channel.

TWS Pairing

• TWS pairing will not work if speakers are already connected to a device via Bluetooth.

  1. Turn off Bluetooth on the connecting device.

  2. Turn the two speakers on.

  3. Press the Power button on the speakers three times at the same time to automatically find and pair with each other. Once paired, a confirmation tone will play.
     Pair with your connecting device

  4. Turn on Bluetooth on your connecting device and select “ AO- EVDBL-S.”

  • At this time, only one instance of “AO-EVDBL-S” will appear on your connecting device’s screen. If the name does not appear, try again from the beginning of step 1.
  5. Now, audio you play on your connected device should come through the two speakers.

Unpairing TWS Connection
Press the power button on the speaker three times to disconnect from TWS pairing mode and use as two separate speakers.

Specifications
Bluetooth version: v5.3
Input power: 5V, 1A
Battery capacity: 400mAh
Effective distance: 10M
Speaker output: 3W
Play time: About 3 hours
Charging time: About 2 hours

TROUBLESHOOTING

Devices do not turn on

• The battery is completely discharged. Recharge the battery.
  No sound from the speaker

• The volume level is low or muted. Unmute or increase the the volume.

• There is no connected Bluetooth device. Pair and connect a Bluetooth device and try again.
  Cannot pair a Bluetooth device with the speaker

• The Bluetooth device is out of range. Bring the Bluetooth device closer to the speaker.

• Make sure the speaker is in Bluetooth mode. Turn off the speaker and turn it on again to switch to Bluetooth mode.

• If the device’s Bluetooth name is not found on the Bluetooth list, refresh the list, or search again and wait up to 1 minute for the device to appear.

• If the speaker is already paired with another device, disconnect or unpair before connecting to the second device.

Visit our website
www.laserco.com.au

Check us out at
www.youtube.com/lasercoau

References

• Laser: The Ultimate Tech Hub for Home Entertainment, Audio, ...

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>