MONOGRAM ZK4SN360VSS French Door Bottom Freezer Panel Kit Instruction Manual
- June 13, 2024
- MONOGRAM
Table of Contents
MONOGRAM ZK4SN360VSS French Door Bottom Freezer Panel Kit
Product Information
The Stainless Steel Door Panel Kit is designed for installation on specific refrigerator models. It includes various components such as top door panels, drawer panels, a toe kick, and screws. The kit is available in different configurations depending on the type of refrigerator and handle style.
Here are the available options:
- ZK3SN364VRH: Single Door Right-Hand Stainless Steel Door Panel Kit
- ZK3SN369VLH: Single Door Left-Hand Stainless Steel Door Panel Kit
- ZK4SN360VSS: French Door Stainless Steel Door Panel Kit
- ZKSB3H3CVSS: Single Door Minimalist Handle Kit
- ZKSB3H3PVSS: Single Door Statement Handle Kit
- ZKSB4H4CVSS: French Door Minimalist Handle Kit
- ZKSB4H4PVSS: French Door Statement Handle Kit
The kit includes all necessary components for installation, including screws and tools. The panels are made of stainless steel, giving your refrigerator a sleek and modern look.
Product Usage Instructions
- Panel Prep: Locate the panel brackets, which are shipped with the refrigerator in the middle drawer. Using the M4 machine screws provided with the stainless steel door panel kit, install the brackets onto the refrigerator. Do not tighten the screws at this point.
- Handle Installation: If you have purchased Monogram Statement or Minimalist handles, follow the instructions provided in the handle kit to install them on the door panels.
- Top Panel Installation: Align the top door panel with the refrigerator’s top section. Using the provided screws, attach the top door panel to the refrigerator. Use a small washer for each screw when installing certain brackets.
- Middle Panel Installation: Align the middle drawer panel with the refrigerator’s middle section. Using the provided screws, attach the middle drawer panel to the refrigerator.
- Bottom Panel Installation: Align the bottom drawer panel with the refrigerator’s bottom section. Using the provided screws, attach the bottom drawer panel to the refrigerator.
- Toe Kick Installation: Attach the stainless steel toe kick to the bottom of the refrigerator using the provided screws.
Following these installation instructions will ensure that the door panels are properly secured and aligned on your refrigerator, giving it a professional and stylish appearance.
Before you begin
Before you begin – Read these instructions completely and carefully.
WARNING: Tip Over Hazard.
These appliances are top-heavy, especially with any doors open, and must be
secured to prevent tipping forward which could result in death or serious
injury. Read and follow the entire installation instructions for securing the
appliance with the anti-tip system before installing the door panel kit.
WARNING: Door Trim Pinch Point Hazard
Improper installation can lead to a finger pinch point hazard between the side
door trim and the cabinets when operating the door, especially with children.
To minimize this risk you must follow the installation instructions for
cabinet dimensions, trim assembly, and door stop angle.
INSTALLATION
This kit provides for the installation of the Stainless Steel Door Panel Assemblies and Stainless Steel Toe Kicks
| ZK3SN364VRH | Single Door Right-Hand Stainless Steel Door Panel Kit |
|---|---|
| ZK3SN369VLH | Single Door Left-Hand Stainless Steel Door Panel Kit |
| ZK4SN360VSS | French Door Stainless Steel Door Panel Kit |
| ZKSB3H3CVSS | Single Door Minimalist Handle Kit |
| ZKSB3H3PVSS | Single Door Statement Handle Kit |
| ZKSB4H4CVSS | French Door Minimalist Handle Kit |
| ZKSB4H4PVSS | French Door Statement Handle Kit |
Components Included Quantity
- Stainless Steel Top Door Panel (Single Door Kit) 1
- Stainless Steel Right Top Door Panel (French Door Kit) 1
- Stainless Steel Left Top Door Panel (French Door Kit) 1
- Stainless Steel Middle Drawer Panel 1
- Stainless Steel Bottom Drawer Panel 1
- Stainless Steel Toe Kick 1
- M4 Phillips Screws 48
TOOLS REQUIRED
Tools and Materials Required:
Phillips #2 bit/driver, M4, M5 hex keys (included with the unit), or
bits/drivers.
Installation Instructions
PANEL PREP
- Panel brackets are shipped with the refrigerator in the convertible (middle) drawer. Use the M4 machine screws provided with the stainless steel door panel kit to install brackets. Do not tighten screws.
- Install Monogram Statement or Minimalist handles (sold separately). Follow the instructions provided in the handle kit.
TOE KICK INSTALLATION
- This kit provides a stainless steel toe kick for a single, integrated unit installation.
- Refer to the unit installation instructions for information on custom toe kicks and stainless steel standard and dual installation toe kicks.
- The toe kick attaches to the refrigerator by using a magnet that is provided with the refrigerator.
- Remove the toe kick magnet from the front access cover.
- Adhere a magnet to the back side of the toe kick. The surface of the toe kick where the magnet is to be placed must be clean and free of foreign material. Center magnet vertically and horizontally.
- Position to kick on the bottom portion of the front access cover.
Instructions for this kit are also included in the full installation
instructions included with the unit.
For the full owner’s manual, visit our website at
monogram.com.
- 31-1000727 Rev. 0
- 05-23 GEA
- Printed in the United States
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>