MONOGRAM ZTSX1DPSNSS 30 Inch Built In Single Oven Owner’s Manual

MONOGRAM ZTSX1DPSNSS 30 Inch Built In Single Oven

FEATURE

THE MONOGRAM STATEMENT COLLECTION
Edge-to-edge handles, polished stainless steel, and hand-finished edges convey a sense of solidity and beauty

LCD CONTROLS
Allow you to adjust oven settings with little effort

WIFI CONNECT
Perfectly in sync with a busy lifestyle, Alexa or Google Home can be used to control an array of oven functions from both inside and outside the home

VOICE CONTROL
Once programmed, you can use your voice to preheat the oven and more, all without raising a finger

NO-PREHEAT AIR FRY
A must-have for health-conscious cooks, the No-Preheat Air Fry mode crisps food to crunchy perfection, without using oils or butter

PRECISION COOKING MODES
Master new recipes and perfectly execute favorite dishes using this ultra- smart system that automatically tracks cooking progress, modifies temperatures and adjusts cook times

SCAN-TO-COOK
Innovative and time saving, scan-to-cook technology ensures that packaged foods are always prepared correctly. A simple scan of the barcode with a smartphone delivers consistently, delicious results

TWIN CONVECTION WITH DIRECT AIR
Achieve beautifully cooked and delicious meals every time with this expertly designed, third heating element and fan combination

5.0 CUBIC FOOT CAPACITY
Easily accommodates even the largest meals

EXCLUSIVE SELF-CLEAN, (2 FULL-EXTENSION, 1 REGULAR) OVEN RACKS
Glide in and out smoothly on stainless steel ball bearings, and are designed to be left in the oven during the self-clean cycle

TEN-PASS BAKE ELEMENT
Covers more surface area for more even baking results

EIGHT-PASS BROIL ELEMENT
Provides complete coverage and even browning, even  for large dishes

SELF-CLEAN WITH STEAM CLEAN OPTION
Gives you flexible options for thorough oven cleaning

SPECIFICATIONS

(63.5 x 44.1 x 51.4 cm)

Minimum Cabinet Width| 30″ (76.2 cm)
Minimum Cabinet Depth| 24″ (61.0 cm)
Minimum Base Support| 220 lbs. (99 kg)

Cutout Width*

| 28 1/2″ (72.4 cm) Min

28 5/8″ (72.7 cm) Max

Cutout Height*

| 27 1/4″ (69.2 cm) Min

27 5/16″ (69.4 cm) Max

Cutout Depth*| 23 1/2″ (59.7 cm) Min
Volts/Hertz/Amps| 240/208 V AC, 60 Hz, 20A

Conduit Length

| 48″ (72″ available special order: WB18T10398)

Electrical Rating

| 3.4 kW at 208V

4.5 kW at 240V

Shipping Weight| 208 lbs. (95 kg)

ATTENTION ELECTRICIAN:
A 240/208V, 60Hz, 20 Amp circuit is required. An individual properly grounded branch circuit or circuit breaker is required. Hardware junction box is required for built-in product.

OVERALL DIMENSIONS

Dimensions in parentheses are in centimeters unless otherwise noted. Actual product dimensions may vary due to manufacturing tolerances.

WALL INSTALLATION

Allow 1/8″ (0.3) clearances from side edges of oven door.

UNDERCOUNTER INSTALLATION

For more details, refer to the installation instructions for this product on Monogram.com. Dimensions in parentheses are in centimeters unless otherwise noted.

HELPFUL TIPS

• Based on a user height of 5′ 6″ to 5′ 10″
• Junction box location (May also be located in adjacent cabinet.)
• Platform must be able to support 220 lbs (99 kg)
• Cabinet surfaces must be an appearance finished surface for flush installation.
• Cleats may be visible and should be finished to match cabinetry.
• If using optional flush install vent trim accessory ZX30VT1, please adjust cutout height to 28-5/8” and bottom cleat height to 1/4″.
• Minimum 31 1/4″ from the top surface of the countertop to the top surface of the wall oven support platform when installed beneath a certified cooktop.

INSTALLATION WITH ADVANTIUM AND WARMING DRAWER

SIDE BY SIDE INSTALLATION

UNDER COOKTOP INSTALLATION

For more details, refer to the installation instructions for this product on Monogram.com. Dimensions in parentheses are in centimeters unless otherwise noted.

HELPFUL TIPS

• Dimensions per Advantium or Microwave Oven requirements

• Dimension per Warming Drawer requirements

• Note this oven is only approved to be installed under specific models as labeled on this unit.

• Support platform made of 3/4″ (1.9 cm) wood is required. Must be capable of supporting 220 lbs (99 kg). Support Platform base to be same height as toe kick.

• Junction box location for wall oven. (May also be located in adjacent cabinet).

• Gas regulator and electric connections for cooktops must be located in an adjacent accessible location to the right

• Top and/or side fillers may be necessary if unit is positioned between existing cabinets. Be sure they are attached securely, since they will anchor the oven in the cabinet.

• For flush oven installations,
  the cooktop cutout must be set back 2 1/2″ (6.4cm) plus the cleat setback.

• Dimension varies based on model. Example:
  ZGU36 5 1/2″ (14.0cm) from wall ZGU30 4 5/16″ (11.0cm) from wall

• Dimension varies based on model. Example:

  • ZGU36 0″ (centerline)
  • ZGU30 12 1/16″ (30.6cm)  (centerline)

• Dimension varies based on model. Example:
  ZGU36 5 1/2″ (14.0)cm, requires use of 90° 1/2″ FPT x 1/2″ FL brass street elbow ZGU30 5″ (12.7cm)

• Minimum 31 1/4″ from the top surface of the countertop to  the top surface of the wall oven support platform when installed beneath a certified cooktop.

For questions about your  appliance, please call 1-800-626-2000.

References

• Monogram Appliances

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>