MONOGRAM ZKW30BV Brass And Titanium Top Plates Installation Guide
- June 1, 2024
- MONOGRAM
Table of Contents
MONOGRAM ZKW30BV Brass And Titanium Top Plates
Brass: ZKW30BV, ZKW36BV, ZKW60BV, ZKW66BV, ZKW72BV
Titanium: ZKW30TV, ZKW36TV, ZKW60TV, ZKW66TV, ZKW72TV
BEFORE YOU BEGIN
Read these instructions completely and carefully.
- Note to Installer – Be sure to leave these instructions with the Consumer.
- Note to Consumer – Keep these instructions with your Owner’s Manual for future reference.
Tip Over Hazard.
These appliances are top heavy, especially with any doors open, and must be
secured to prevent tipping forward which could result in death or serious
injury.
PRODUCT DIMENSIONS
| Designated Width | Actual Width |
|---|---|
| 30 | 29-1/2” |
| 36 | 35-1/2” |
| 60 | 59-1/4” |
| 66 | 65-1/4” |
| 72 | 71-1/4” |
FRONT VIEW
SIDE VIEW
ADDITIONAL PARTS PROVIDED
-
2x Upper Anti Tip Brackets
-
6x Screws
INSTALLATION INSTRUCTIONS
Prepare Column(s) for Installation as per Column Installation Instructions.
Tip Over Hazard.
These appliances are top heavy, especially with any doors open, and must be
secured to prevent tipping forward which could result in death or serious
injury.
Read and follow the entire installation instructions for securing the
appliance with the anti-tip system.
After installing the Column Anti-Tip Brackets as per the Column Installation
Instructions, follow these instructions to install the Upper Anti-Tip
Brackets.
This is not a replacement for proper column installation, be sure to follow
all column installation instructions carefully.
Install one Upper Anti-Tip Bracket to each side of the cabinet enclosure. Use three screws per bracket, drill 5/32” holes to aid installation.
See diagram at right for location.
Be sure to install all three screws in each Upper Anti-Tip Bracket and confirm they are tight before proceeding.
If installing into drywall, use correctly sized drywall anchors.
Prepare Column(s) for Installation as per Column Installation Instructions.
For Dual Integrated Installation:
- Continue Column installation up to the point of unification, right before pushing the Column into the opening.
- Go to Page 4 of these Installation Instructions to install the Top Plate.
- Return to the Column Installation Instructions to complete the installation.
For Single Integrated Installation:
- Continue Column installation up to the point of unification, right before pushing the Column into the opening.
- Go to Page 5 of these Installation Instructions to install the Top Plate.
- Return to the Column Installation Instructions to complete the installation.
For Dual Integrated Installation
STEP 1
Confirm the columns have been properly unified with the installation of all
unification brackets.
STEP 2
Loosen the 4 indicated screws on the top of the columns.
STEP 3
Place top plate keyhole slots over the screw heads on each side.
STEP 4
STEP 5
Confirm all screws are tight.
Return to the column installation instructions.
For Single Integrated Installation
STEP 1
Loosen the 4 indicated screws on the top of the column
STEP 2
Place top plate keyhole slots over the screw heads on each side.
STEP 3
STEP 4
Confirm all screws are tight.
Return to the column installation instructions.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>