TRIO 6712901XX Girona LED Light Instruction Manual

September 12, 2024
Trio

TRIO 6712901XX Girona LED Light

Product Information

Specifications

  • Model Number: 6712901XX
  • Input: 230V ~ 50Hz
  • Light Source: 1 x LED 48W

Product Usage Instructions

Safety Instructions
Before assembling or using the product, please read and adhere to the safety instructions provided in the manual.

Functionality
The light has three brightness levels: 100%, 50%, and 25%, all at 2700K. The selection is done by quickly turning the light on and off. The light has a memory function that recalls the last setting.

Remote Control Operation

  1. To turn the light on or off.
  2. Nightlight mode can be activated using this button.

Using the Light without Remote Control
If the lamp is switched on again via the main switch after more than 1 minute, the last lighting scenario set with the remote control is activated (memory function). If the lamp is switched off with the remote control and then turned on with the main switch, the dimmer switch function activates at the warmest light color.

Setting Up Remote Control
To pair the remote control with the lamp, disconnect the lamp from power for 10 seconds. Then switch it on using the wall switch and simultaneously press the pairing button on the remote control. The lamp will confirm successful pairing by flashing. The lamp is now ready to be controlled by the remote.

FAQ

Declaration of Conformity
Trio Leuchten GmbH located at Gut Nierhof 17, D-59757 Arnsberg, declares that this product complies with Directive 2014/53/EU. The full text of the EU declaration of conformity can be found at this link.

WARNING!
Before assembling, please read carefully the safety instructions!

TRIO Leuchten GmbH
TRIO International GmbH
Gut Nierhof 17
D-59757 Arnsberg
www.trio-lighting.com
Developed in Germany by Made in PRC
WEEE-Reg. Nr.: DE78273666
TRIO Lighting Ibérica s.l.: RAEE 4544
TRIO Lighting Italia s.r.l.: RAEE IT13020000007829
TRIO Lighting Scandinavia Oy: WEEE PIR2005Y354114/2114

DECLARATION OF CONFORMITY
Hereby, TRIO Leuchten GmbH, Gut Nierhof 17, D-59757 Arnsberg, declares that this product is in compliance with directive 2014/53/EU.

The full text of the EU declaration of Conformity is available at the following internet address:www.trio-lighting.com
This product contains light source(s) of energy efficiency class(es) F

Description of how the light works without the remote control unit

If the lamp is switched on again via the main switch/wall switch after more than 1 minute, the lighting scenario last set with the remote control is set (memory function).
If the lamp is switched off using the remote control and switched on again using the main switch/wall switch, the dimmer switch function comes into effect at the warmest light color by quickly switching it off and on again using the wall switch:

  • Brightness 100% 2700K
  • Brightness 50% 2700K
  • Brightness 25% 2700K

You can select it, with short turn on and turn off of the lamp.

Description of how the light works with the remote control unit
The most recently configured light settings is always displayed (memory effect) The synchronous control of several lights is not foreseen.

Operation of the remote control

  • On/Off
  • On/Off: Night light
  • 3 & 4. Light color: The regulation takes place in stages. The individual levels can be controlled by briefly pressing the button. The warmest or coldest color setting is reached more quickly by pressing the key continuously.
  • 5 & 6. Brightness regulator: The adjustment takes place in stages. By pressing for a short period, it is possible to control the individual stages. Pressing the button permanently results in the maximum or minimum brightness being reached.

Set up remote control
Please disconnect the lamp from the mains for 10 seconds. Then switch the lamp on using the wall switch and at the same time press the “B+” button on the remote control. After about four seconds, the lamp confirms the successful programming by flashing several times. Now the lamp can be controlled with the remote control. To disconnect the remote control, press the “B+” button three times while it is switched on.

Declaration of Conformity
Hereby, Trio Leuchten GmbH. Gut Nierhof 17, D-59757 Arnsberg, declares that this product is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://files.trio-lighting.com/ce-conformity/671290131.pdf

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals