ABYSM AB128512 PC Case ATX Danube Sava BX203 Black User Manual

June 13, 2024
ABYSM

ABYSM AB128512 PC Case ATX Danube Sava BX203 Black

ABYSM AB128512 PC Case ATX Danube Sava BX203 Black

USER MANUAL

PRODUCT FEATURES

  • Dual U3 + Type-C, which supports fast interface updating.
  • Simple dual-glass design, which makes the product cooler.
  • Wide hardware design, which ensures better compatibility.
  • Efficient heat dissipation, which supports 10 fans at most.

• Product design and specifications may be revised to improve quality and performance without notice.

Product Features

CASE STRUCTURE

  1. Transparent glass side
  2. Mainframe
  3. Top dustproofmesh
  4. 1/0 components
  5. Hardware side plate
  6. Glass panel
  7. Hard disk support
  8. Bottom dustproof mesh

Case Structure

ACCESSORIES

Copper column x3

Power supply screw x6

Hard disk screw x9

Mainboard screw x 18

Band x5

 INSTALL HDD

  • Loosen screw to disassemble hard disk frame.
  • Install HDD.
  • Put hard disk back to frame.
  • Fasten it with screw.

Install Hdd

  • Loosen screw to disassemble hard disk frame.
  • Install SSD.
  • Put hard disk back to frame.
  • Fasten it with screw.

Install Hdd

1/0 PANEL

1/0 Panel

DISASSEMBLY STEPS

  • Loosen the screw to disassemble t transparent glass side.
  • Dismantle panel.

Disassembly Steps

INSTALL MAINBOARD

Applicable mainboards: ATX/MicroATX/ITX

  • Mount copper column based on mainboard hole.
  • Set mainboard at the case installation position.
  • Fasten screw.

Install Mainboard

INSTALL POWER SUPPLY

  • Set power supply to case installation posit ion.
  • Fix it with 4 power supply screws.

Install Power Supply

INSTALL GRAPHICS CARD

  • Loosen the screw to disassemble ftap

  • Set graphics card to case installation
    position and fasten it with screw

  • Mount and fasten ftap

Install Graphics Card

INSTALL FAN AND RADIATOR

The configuration of fan and water cooling radiator for this case is shown below:
Side:
120mm fan x 3
140mm fanx2
Top:
120mm fan x 3
140mm fanx2
360 mm radiator x 1
280 mm radiator x 1
Rear:
120 mm fan x 1
120 mm radiator x 1
Bottom:
120 mm fan x 3

Install Fan And Radiator

INSTRUCTIONS FOR DIMMING OF DAZZLING FAN

Synchronous interface of mainboard
Dimming switch interface
Connect power supply

Note: The standard three fans are in reverse blade design Wind direction is contrary to common fan

MEANING OF THE DUSTBIN SYMBOL

Protect our environment: do not dispose of electrical equipment in your domestic waste. Please return any electrical equipment that you will no longer use to the collection points provided for their disposal. These simple steps can help to avoid the potential effects that incorrect waste disposal can cause on the environment and human health. This will contribute to recycling and other forms of re-use of electrical and electronic equipment Information concerning where the equipment can be disposed of can be obtained from your local authorities.

MADE IN CHINA

Imported by: COLORS. Information Technology, SL
C Morse. 49 – Pol. Ind. San Marcos
28906 Getafe (Madrid)
CIF: B-84045574 · www.colors-it.es

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals