ABYSM GAMING AB218501 ATX 650W Plus Gold Full Modular User Manual

ABYSM GAMING AB218501 ATX 650W Plus Gold Full Modular

Specifications :

• Brand: ABY Gaming
• Model: ATX 850W PLUS GOLD
• Power Output: 850W
• Color Options : Black (AB218501) / White (AB218502)
• Connectors :
  • Main Power Connector (24 pin)
  • ATX 12 V Connector (4 + 4 pin)
  • PCI-E Connector (6 + 2 pin)
  • SATA Connector (5 pin)
  • Peripheral Connector (4 pin)
  • PCIE 5.1 16P Connector

Product Usage Instructions

Installation Steps

1. Make sure that your system is turned off and unplugged. Disconnect the AC power cord from your old power supply.
2. Open your computer case; Please refer to the directions in your case manual.
3. Install the PSU into the case with the four screws provided.
4. If your motherboard requires a 24-pin Main Power connector, connect the 20+4 pin Main Power connector to the motherboard. If your motherboard only requires a 20-pin Main Power connector, detach the 4-pin connector from the 20+4 pin Main Power connector and connect only the 20-pin connector to the motherboard.
5. For motherboards that require a single Spin EPS connector, use the 4+4 pin connector from the power supply.
6. Connect other peripheral power connectors to devices such as hard drives, optical drives, etc.
7. If your graphic card requires a PCI-E power connector, connect the corresponding PCI-E connector as instructed by your graphic card’s user manual.
8. Close your computer case and connect the AC power cord to the power supply AC inlet.

FAQ:

• Q: Can I use this power supply with a mini ITX case?
  • A: It depends on the dimensions of your mini ITX case. Ensure that the power supply fits within the available space in your case.
• Q: What is the efficiency rating of this power supply?
  • A: This power supply is rated as ATX 850W PLUS GOLD, indicating it has a Gold efficiency rating.
• Q: How many SATA connectors are available on this power supply?
  • A: This power supply comes with a total of 10 SATA connectors.

Warnings and Caution

1. Do not unplug the AC power cord when the power supply is in use. Doing so may cause damage to your components.
2. Do not place the power supply in a high humidity and/or temperature environment.
3. High voltages exist in the power supply. Do not open the power supply case unless you are an authorized service technician or electrician. Doing so will void the warranty.
4. PSU should be powered by the source indicated on the rating label.
5. All warranties and guarantees will be voided if failure to comply with any of the warnings and cautions covered in this manual.

Components Check

• Power supply unit
• Mounting screw x 4
• User manual
• Cable straps x 4
• AC power cord

Power Connector Introduction

Installation Steps

Note: Make sure that your system is turned off and unplugged. Disconnect the AC power cord from your old power supply.

1. Open your computer case; Please refer to the directions in your case manual.
2. Install the PSU into the case with the four screws provided.
3. If your motherboard requires a 24 pin Main Power connector, please connect the 20+4 pin Main Power connector to the motherboard. If your motherboard only requires a 20pin Main Power connector, please detach the 4-pin connector from the 20+4 pin Main Power connector then connect only the 20-pin connector to the motherboard.
   • For a motherboard that only requires a 4pin ATX 12V (CPU) connector, please detach a 4 pin connector from the 4+4 pin ATX 12V connector and connect it to the motherboard. (Either one of the 4 pin from the 4+4 pin ATX 12V connector will work).
4. For a motherboard that requires a single Spin EPS connector, please use the 4+4 pin connector from the power supply.
5. Connect other peripheral power connectors to devices such as hard drives, optical drives, etc.
6. If your graphic card requires a PCI-E power connector, please connect the corresponding PC lE connector as instructed by your graphic card’s user manual. Please note the power supply utilizes a unique 6+2 pin PCI-E connector that can be effectively used as a single Spin or 6-pin PCI-E connector. To use it as a 6-pin PCI-E connector, please detach the 2-pin connector from the 6+2-pin connector.
7. Close your computer case and connect the AC power cord to the power supply AC inlet.

Output Specification

Total Protection

• Over Voltage Protection
• Over Power Protection Protection at 115%-150% full load
• Short Circuit Protection Activated when any DC rails short +3,3 V +5,2V Max. short-circuited

EMI & SAFETY

UL/CUL, TUV, GOST, CE, FCC and BSMI.

Environments

• Operating temperature : +OºC to +40°C
• Operating humidity: 20% to 90%, non-condensing
• MTBF : > 120,000 hours

MEANING OF THE DUSTBIN SYMBOL

MEANING OF THE DUSTBIN SYMBOL

| Protect our environment: do not dispose of electrical equipment in your domestic waste. Please return any electrical equipment that you will no longer use to the collection points provided for their disposal. These simple steps can help to avoid the potential effects that incorrect waste disposal can cause on the environment and human health. This will contribute to recycling and other forms of re-use of electrical and electronic equipment. Information concerning where the equipment can be disposed of can be obtained from your local authorities.

MADE IN CHINA

• Imported by : COLORS Information Technology, SL.
• C/ Morse, 49 – Pol. Ind. San Marcos · 28906 Getafe (Madrid)
• CIF : B-84045574
• www.colors-it.es

www.abysmgaming.com

Please read this manual carefully before using the device. Save it for future reference.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>