ABYSM GAMING ARCTIC 360 ARGB Liquid PC Cooler User Manual
- June 12, 2024
- ABYSM GAMING
Table of Contents
LIQUID COOLER ARGB
AATIfr 94h
**AN baw a WY Py: 48833303
**
ARCTIC 360 ARGB Liquid PC Cooler
Supported Platforms / Plataformas Soportadas
INTEL
LGA2066/2011/1156/1155/1151/1150/1200/17XX
AMD
FM2+/FM2/FM1/AM4/AM3+/AM3/AM2+/AM2/AM5
| ® 120mm FAN| 3 PCS| ® BACKPLATE| 1 PCS
---|---|---|---|---
® RADIATOR 1 PCS
® Intel BRACKET 2 PCS| 0 AM4 BRACKET| 2 PCS| ® AM4 SCREW CLIP| 2 PCS
0 AM4 THUMB SCREWS 2 PCS| 0 M3.0 SCREWS| 4 PCS| ® M4.0 SCREWS| 4 PCS
0 LONG FAN SCREWS 12 PCS| 0 BRACKET SCREWS| 4 PCS| g CASE SCREWS| 12 PCS
® THERMALLY CONDUCTIVE SILICONE 1 PCS| 0 SPOON| 1 PCS| 15 CABLE SET| 1 PCS
-
Tear protective film I brush silicone
Guide
1. Tear the PE film from the water-cooled copper base
2. Apply proper amount of silicon grease on the CPU and evenly with a silicon spoon
-
Lock the bracket
Guide 1. Keep copper head upward, put bracket into the card groove then lock the bracket screw -
Lock product to the board
AM4/AM5 board install
1. Screws clip through the bracket then tighten the thumbs screws 2. Insert the AM4-5 screw clips and secure with the screws as shown
INTEL
Intel board install (Server X79/X58)
Guide
1. Tear off the backplate adhesive
2. Fix the backplate to the mounting hole on the motherboard
3. Align the backplate screw hole then lock the bracket screw
INTEL
‘Intel 2011 board install
Guide 1. Align the backplate screw hole then lock the bracket screw -
Conned Power to the Fans and Pump
CPU FAN is usually on the left side of the motherboard
Guide
1. Connect 2pcs fans to cable set, then plug into the Computer socket
2. Connect pump tach cable to the CPU FAN header on your motherboard -
Lock Fans and Radiator to the case
Guide 1. Fix the fan on the radiator with screws 2. Lock the radiator on the computer case
www.abysmgaming.com
Please read this manual carefully before using the device. Save it for future
reference.