avsl 151.598UK 24 x 3W LED Wall Bar User Manual
- June 13, 2024
- AVSL
Table of Contents
avsl 151.598UK 24 x 3W LED Wall Bar
Please read through this manual thoroughly before use, any damage caused by misuse of product will not be covered by warranty.
Effects bar with 12 high output RGB wash and 12 amber beam LEDs that provide amazing colour washes and patterns against walls, ceilings or even floors. The alternating RGB and amber LEDs can be controlled by auto or sound activated modes from preset internal colour sequences. Alternatively, the bar can be operated remotely by DMX in either 4, 6, 11, 48 and 54 channel modes and connected to more units if a larger effect is required. Supplied with professional twist and lock power connections and tilt-adjustable brackets for mounting to walls or ceilings.
In the box:
Your Wash & Beam should arrive with you in a single carton in good condition.
The carton should contain 1 x main unit, 2 fixing stand/brackets with
thumbscrews, 1 x twist and lock UK mains lead and 1 x user guide.
Warning:
To prevent risk of fire or electric shock, do not expose the unit to rain or
damp environments. In the event of a spillage, disconnect the mains and allow
the unit to dry out naturally. Qualified personnel should then check the unit
before continuing use. Please do not open cover, contains high voltage. This
product is not serviceable or repairable by the end user. Please refer to
qualified personnel for service and repair.
Placement:
- Use the included mounting brackets to fix to a stand or lighting truss.
- Use secondary safety fixings if mounting overhead.
- Keep away from damp or dusty environments.
- Ensure adequate airflow around the fixture housings.
- Ensure adequate access to controls and connections.
- Do not aim LED or laser output directly into line of sight, as this can result in eye injury.
Cleaning:
- Use a soft cloth with a neutral detergent to clean the casing as required.
- Do not use strong solvents for cleaning the unit.
Rear panel controls:
Manual control menu:
- Press the “MENU” button to enter the settings menu.
- Press “UP” and “DOWN” buttons to navigate through various setting functions.
- Press “ENTER” button to confirm the desired setting.
DMX mode:
The Wash & Beam can be controlled by DMX signal, simply connect the DMX signal
source to the DMX input on the unit via a balanced XLR lead. Extra fixtures
can be controlled by the same DMX signal by looping through the DMX out on the
unit. To enter DMX mode, select d001 from the menu and confirm the correct
start address and channel selection by using the “UP” and “DOWN” buttons and
“ENTER”. The “d” on the LED display will begin to flash once it’s received the
DMX signal from the controller. This unit has 4, 6, 11, 48 or 54 DMX channels
as indicated in the tables below:
4 Channel mode:
Channel | Value | Function and description |
---|---|---|
1 | 0 – 255 | Red dimmer (0-100%) |
2 | 0 – 255 | Green dimmer (0-100%) |
3 | 0 – 255 | Blue dimmer (0-100%) |
4 | 0 – 255 | Amber beam dimmer (0-100%) |
6 Channel mode:
Channel | Value | Function and description |
---|---|---|
1 | 0 – 255 | Master dimmer (0-100%) |
2 | 0 – 9 | No function |
10 – 255 | Strobe (slow to fast) | |
3 | 0 – 255 | Red dimmer (0-100%) |
4 | 0 – 255 | Green dimmer (0-100%) |
5 | 0 – 255 | Blue dimmer (0-100%) |
6 | 0 – 255 | Amber beam dimmer (0-100%) |
11 Channel mode:
Channel | Value | Function and description |
---|---|---|
1 | 0 – 255 | Master dimmer (0-100%) |
2 | 0 – 255 | Red dimmer (0-100%) |
3 | 0 – 255 | Green dimmer (0-100%) |
4 | 0 – 255 | Blue dimmer (0-100%) |
5 | 0 – 255 | Amber beam dimmer (0-100%) |
6 (strobe) | 0 – 9 | No function |
10 – 255 | Strobe (slow to fast) | |
7 (RGB) | 0 – 3 | Channels 2~4 control colour |
4 – 7 | RGB Effect 1 (channels 2~4 control colour) | |
8 – 11 | RGB Effect 1 (channels 2~4 control colour) | |
“” – “” | “” “” “” “” “” “” “” | |
124 – 127 | RGB Effect 31 (channels 2~4 control colour) | |
128 – 131 | RGB Effect 32 (built-in effect colors) | |
132 – 135 | RGB Effect 33 (built-in effect colors) | |
“” – “” | “” “” “” “” “” “” | |
196 – 199 | RGB Effect 49 (built-in effect colors) | |
200 – 203 | RGB Auto Effect (cycle 1-49) | |
204 – 207 | Sound to Light Mode 1 (channel 10 failure) | |
208 – 211 | Sound to Light Mode 2 (channel 10 failure) | |
212 – 255 | Sound to Light Mode 3 (channel 10 failure) | |
8 | 0 – 255 | RGB program speed (slow to fast) |
9 | 0 – 255 | RGB effect background colour select (see seperate table below for |
details)
10 (A beam)| 0 – 006| Channel 5 overall brightness
7 – 13| Built in effect 1
14 – 20| Built in effect 2
“” – “”| “” “” “”
231 – 237| Built in effect 33
238 – 255| Auto cycle (built in effects 1-33)
11| 0 – 255| Amber beam program speed (slow to fast)
48 Channel mode:
Channel | Value | Function and description |
---|---|---|
1 | 0 – 255 | Red 1 dimmer (0-100%) |
2 | 0 – 255 | Green 1 dimmer (0-100%) |
3 | 0 – 255 | Blue 1 dimmer (0-100%) |
4 | 0 – 255 | Red 2 dimmer (0-100%) |
5 | 0 – 255 | Green 2 dimmer (0-100%) |
6 | 0 – 255 | Blue 2 dimmer (0-100%) |
“” – “” | “” “” “” “” | |
34 | 0 – 255 | Red 12 dimmer (0-100%) |
35 | 0 – 255 | Green 12 dimmer (0-100%) |
--- | --- | --- |
36 | 0 – 255 | Blue 12 dimmer (0-100%) |
37 | 0 – 255 | Amber beam 1 dimmer (0-100%) |
“” – “” | “” “” “” “” | |
48 | 0 – 255 | Amber beam 12 dimmer (0-100%) |
54 Channel mode:
Channel | Value | Function and description |
---|---|---|
1 | 0 – 255 | Red 1 dimmer (0-100%) |
2 | 0 – 255 | Green 1 dimmer (0-100%) |
3 | 0 – 255 | Blue 1 dimmer (0-100%) |
4 | 0 – 255 | Red 2 dimmer (0-100%) |
5 | 0 – 255 | Green 2 dimmer (0-100%) |
6 | 0 – 255 | Blue 2 dimmer (0-100%) |
“” – “” | “” “” “” “” | |
34 | 0 – 255 | Red 12 dimmer (0-100%) |
35 | 0 – 255 | Green 12 dimmer (0-100%) |
36 | 0 – 255 | Blue 12 dimmer (0-100%) |
37 | 0 – 255 | Amber beam 1 dimmer (0-100%) |
“” – “” | “” “” “” “” | |
48 | 0 – 255 | Amber beam 12 dimmer (0-100%) |
49 (strobe) | 0 – 009 | No function |
010 – 255 | Strobe (slow to fast) | |
50 (RGB) | 0 – 3 | Channels 2~4 control colour |
4 – 7 | RGB Effect 1 (channels 2~4 control colour) | |
8 – 11 | RGB Effect 1 (channels 2~4 control colour) | |
“” – “” | “” “” “” “” “” “” “” | |
124 – 127 | RGB Effect 31 (channels 2~4 control colour) | |
128 – 131 | RGB Effect 32 (built-in effect colors) | |
132 – 135 | RGB Effect 33 (built-in effect colors) | |
“” – “” | “” “” “” “” “” “” | |
196 – 199 | RGB Effect 49 (built-in effect colors) | |
200 – 203 | RGB Auto Effect (cycle 1-49) | |
204 – 207 | Sound to Light Mode 1 (channel 10 failure) | |
208 – 211 | Sound to Light Mode 2 (channel 10 failure) | |
212 – 255 | Sound to Light Mode 3 (channel 10 failure) | |
51 | 0 – 255 | RGB program speed (slow to fast) |
52 | 0 – 255 | RGB effect background colour select (see seperate table below for |
details)
53 (A beam)| 0 – 006| Channel 5 overall brightness
7 – 13| Built in effect 1
14 – 20| Built in effect 2
“” – “”| “” “” “”
231 – 237| Built in effect 33
| 238 – 255| Auto cycle (built in effects 1-33)
54| 0 – 255| Amber beam program speed (slow to fast)
RGB background colour list:
Value | Colour | Value | Colour |
---|---|---|---|
0-6 | R:000 G:000 B:000 | 126-132 | R:153 G:153 B:000 |
7-13 | R: 51 G:000 B:000 | 133-139 | R:204 G:204 B:000 |
14-20 | R:102 G:000 B:000 | 140-146 | R:255 G:255 B:000 |
21-27 | R:153 G:000 B:000 | 147-153 | R: 51 G:000 B: 51 |
28-34 | R:204 G:000 B:000 | 154-160 | R:102 G:000 B:102 |
--- | --- | --- | --- |
35-43 | R:255 G:000 B:000 | 161-167 | R:153 G:000 B:153 |
42-48 | R:000 G: 51 B:000 | 168-174 | R:204 G:000 B:204 |
49-55 | R:000 G:102 B:000 | 175-181 | R255 G:000 B:255 |
56-62 | R:000 G:153 B:000 | 182-188 | R:000 G: 51 B: 51 |
63-69 | R:000 G:204 B:000 | 189-195 | R:000 G:102 B:102 |
70-76 | R:000 G:255 B:000 | 196-202 | R:000 G:153 B:153 |
77-83 | R:000 G:000 B: 51 | 203-209 | R:000 G:204 B:204 |
84-90 | R:000 G:000 B:102 | 210-216 | R:000 G:255 B:255 |
91-97 | R:000 G:000 B:153 | 217-223 | R: 51 G: 51 B: 51 |
98-104 | R:000 G:000 B:204 | 224-230 | R:102 G:102 B:102 |
105-111 | R:000 G:000 B:255 | 231-237 | R:153 G:153 B:153 |
112-118 | R: 51 G: 51 B:000 | 238-244 | R:204 G:204 B:204 |
119-125 | R:102 G:102 B:000 | 245-255 | R:255 G:255 B:255 |
Specifications:
Power supply | 110-240Vac, 50/60Hz |
---|---|
Power consumption | 80W |
LED type | 12x 3W RGB 3-in-1, 12x 3W CW CREE |
Beam angle | Beam 3°, Wash 35° |
Modes | Auto, DMX512, Sound, Master/Slave |
DMX channels | 4, 6, 11, 48 or 54CH |
Connections | Power in/out (twist and lock), DMX in/out (3pin XLR) |
Dimensions | 1000 x 65 x 55mm |
Weight | 2.4kg |
Troubleshooting:
No power (mains) | Check mains voltage is correct and outlet is switched on |
---|
Check twist and lock power lead is connected properly
No light output| Check control panel mode settings
Check DMX settings from controller (dimmer levels, blackout etc.)
Unresponsive to DMX
| Check that unit is in DMX mode and ensure the A on the DMX address flashes
to confirm it’s receiving a DMX signal
Check DMX controller is not set to black out
Check DMX controller is on correct fixture/page
Check master dimmer value
Check correct DMX address is set
Check DMX connection and leads
Overheating/Cutting out| Ensure adequate ventilation and unit is not too close
to a heat source
This product is classed as Electrical or Electronic equipment and should not be disposed with other household or commercial waste at the end of its useful life. The goods must be disposed of according to your local council guidelines.
Errors and omissions excepted.
Copyright© 2023 AVSL Group Ltd, Unit 2 Bridgewater Park,
Taylor Road, Trafford Park, Manchester. M41 7JQ.
www.avsl.com
Documents / Resources
| avsl
151.598UK 24 x 3W LED Wall
Bar
[pdf] User Manual
151.598UK 24 x 3W LED Wall Bar, 151.598UK, 24 x 3W LED Wall Bar, LED Wall Bar,
Wall Bar, Bar
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>