MATICA XID-M300 Retransfer Printer User Guide
- June 13, 2024
- MATICA
Table of Contents
- MATICA XID-M300 Retransfer Printer
- Product Information
- Product Usage Instructions
- Opening the printer box
- Contents checklist
- Power your printer
- Download and install driver
- Register your printer
- Installing the color ribbon and retransfer film into your printer
- Connecting the output hopper
- Card loading
- Set up complete
- Documents / Resources
MATICA XID-M300 Retransfer Printer
Product Information
The XID-M300 is a printer designed for card printing. It comes with various
accessories and components, including a power cord, USB cable, output hopper,
cleaning card, and cleaning swab.
The printer is capable of printing high-quality cards and requires the
installation of drivers and software.
Product Usage Instructions
- Opening the printer box:
- Remove all 4 plastic locking clips at the base of the printer box.
- Carefully slide the box upwards.
- Remove the accessories box.
- Remove the foam packing from the printer and lift the printer onto the desired desk location.
- Remove any plastic protective films from the printer.
- Retain and store all packing materials for future use. If there are any warranty returns, they should be sent in the original packaging.
- Contents checklist: Please make sure that all the components and accessories listed below are included in the box. If there are any missing or damaged items, please contact your dealer for assistance.
- XID-M printer
- Power cord
- USB cable
- Output hopper
- Cleaning card
- Cleaning swab
- Power your printer: Connect the power cord to the printer and a power source.
- Visit: www.maticagroup.com/install or scan the provided QR code using your computer’s webcam to access the installation page. Follow the online instructions for installation.
- Download and install driver: Follow the instructions provided during the driver installation process.
- Register your printer: Visit the provided website and follow the online instructions to register your printer.
- Installing the color ribbon and retransfer film into your printer:
- Open the printer.
- Release the color ribbon cassette (red).
- Release the retransfer film cassette (black).
- Install the color ribbon and retransfer the film according to the provided instructions.
- Connecting the output hopper:
- Attach the output hopper to the printer.
- Card loading:
- Unlock the cassette(s) by sliding left and lifting up and out.
- Open the lid and locate the cardholder slider.
- Load cards into the cassette(s) following the provided orientation.
- Adjust the card thickness using the slide adjuster located on the base of the cassette.
- Set up complete: You are now ready to start printing!
- Replacing input cassette:If needed, slide the input cassette to the far left, load the cards, and shut the lid.
For more information and detailed instructions, please refer to the XID-M300 Quick Start Guide available on www.maticagroup.com.
Opening the printer box
- Remove all 4 plastic locking clips at base
- Carefully slide box upwards
- Remove accessories box
- Remove foam packing from printer and lift printer onto desk location
- Remove plastic protective films
- Retain and store all packing materials for future use. Any warranty returns should be sent in original packaging
Contents checklist
- XID-M printer
- Power cord
- USB cable
- Output hopper
- Cleaning card
- Cleaning swab
Please make sure that all the components and accessories are included in the box. If there are missing or damaged items, please contact your dealer for assistance.
Power your printer
- Connect the power cord ****
- Power ON the printer
Visit
- www.maticagroup.com/install
- Or scan the QR code below using your computer’s webcam to the installation page and follow the online instructions.
Download and install driver
- Follow the online step-by-step guide to download and install the printer driver.
Connect USB cable
- Connect the printer to the computer using the USB cable when instructed during driver installation.
Register your printer
atwww.maticagroup.com/register
- Validate your warranty.
- Receive notifications of driver and firmware updates.
- Gain easy access to support.
- Register: via mobile
- Scan the QR code to the registration page and follow the online instructions.
Installing the color ribbon and retransfer film into your printer
- Open printer
- Release the color ribbon cassette (red)
- Release the RT film cassette (black)
- Installing ribbon and film
Inserting cassettes into printer
- Using the green knobs and circular apertures in the cassette as reference points, place the cassette into the channels and slide into place.
Connecting the output hopper
- Connect the output hopper to the left hand side of the printer.
Card loading
Removing input cassette
- Open top lid and locate card cassette(s). Dual input models have two cassettes.
- Loading cards
- Card thickness adjustment
- Located on base of cassette Slide adjuster to the correct card size
Replacing input cassette
- Push cassette into slot until it locks in place
Set up complete
You are now ready to start printing!
Documents / Resources
|
MATICA XID-M300 Retransfer
Printer
[pdf] User Guide
XID-M300 Retransfer Printer, XID-M300, Retransfer Printer, Printer
---|---
References
- Matica | Solutions for a changing world | Digital ID Card Personalization & Card Software Solutions
- Installation Guide | Matica
- Register Product | Matica
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>