POLARIS PR100-34-2NV High Efficiency Residential Gas Water Heater Instruction Manual
- June 13, 2024
- Polaris
Table of Contents
Polaris™ High-Efficiency
Residential Gas Water Heater
The perfect choice for combination systems
PR100-34-2NV High Efficiency Residential Gas Water Heater
Polaris™ has a high grade 444 stainless steel tank with brass connections for years of dependable, trouble-free service – no anode required. A submerged combustion chamber with spiral flue provides up to 96% thermal efficiency and ultra-low standby heat loss of approximately 1%.
SEALED COMBUSTION WITH WOVEN FIBRE PREMIX BURNER
- Metal bred burner is designed for clean combustion in high-intensity blue flame mode
- Uniform combustion provides excellent heat transfer
- Manufactured of refractory steel that resists corrosion and provides excellent resistance to thermal and mechanical shock, even at extreme temperatures
WHISPER QUIET OPERATION
- Ultra quiet blower and burner minimize noise
- Requires 120 volt 60Hz power supply and draws less than 5 Amps
POWER DIRECT VENT USING 2” OR 3” PLASTIC PIPE
- Direct vents up to 120’ using ULC S636 PVC or CPVC pipe either through the wall or through the roof
- Optional concentric vent kit available
SELF-DIAGNOSTIC CONTROL SYSTEM
- Three external LED lights indicate operational status of water heater
- A microprocessor monitors nine critical functions
- A LED troubleshooting light, visible through view port, signals heater operation status
FULL SERVICEABILITY FROM THE FRONT
- Removal of two front-located access panels exposes all serviceable components
- Modular components are easily removed
ENERGY STAR® QUALIFIED
- PR100-34-2NV model meets ENERGY STAR® requirements
OTHER FEATURES
- Thermistor temperature sensor
- 24-volt thermostat control
- Hot surface ignition
- Full flow brass drain valve
- Zero clearance to combustibles
- Factory installed T&P valve
- Factory provided condensate trap
- Multiple 1” brass tank connections
WARRANTY
- 10 year limited tank warranty
- 1 year limited parts warranty
Polaris™ High-Efficiency Residential Gas Water Heater
The perfect choice for combination systems
UP TO 96% EFFICIENT
- The quiet, brushless DC blower prep urges the submerged combustion chamber for 8 seconds and turns off.
- The hot surface igniter is energized and glows red hot.
- The blower turns on, precisely mixing air and gas for combustion. The mixture is forced through the metal bred burner and is ignited by the hot surface igniter. A blue flame is evenly distributed across the entire burner, resulting in clean combustion with low nitrous oxide emissions.
- The combustion chamber wall transfers high temperature heat from the flame to the water.
- The blower pushes hot combustion gases through the spiral coil, which scrubs the remaining heat from the hot gases.
- As combustion gas exits the bottom of the spiral coil, it is barely warm to the touch. Up to 96% of the heat from the flame is transferred to the water.
- Combustion gases are vented through ULC S636 plastic pipe.
- Condensation formed by cooled combustion air is captured by a condensate trap and drained through a drain line.
THE QUIET WAY TO EFFICIENTLY HEAT WATER
An ultra quiet radial blower is combined with a submerged burner for whisper quiet operation. Indicator lights illuminate when the power is on and when the igniter and burner are operating.
THE BEST CHOICE FOR HOT WATER
Polaris is ideal for large homes. For dishwashing, showers, baths, clothes washing, or hot tubs, Polaris is the best choice. Polaris models heat up to 192 GPH at a 90°F temperature rise, compared to 41 GPH for standard gas water heaters.
FORCED AIR HYDRONIC HEAT
Polaris can be used to combine an air handler for comfortable forced air hydronic space heating with potable hot water. Hot water is circulated through a coil in the air handler. Air from the home is warmed as it is blown across the coil. Warmed air is returned to the home through air ducts. With up to 199,000 BTUs, Polaris can heat most homes, large or small.
RADIANT HYDRONIC HEAT
Polaris works great for homeowners who prefer radiant hydronic heat. With radiant floor hydronic systems, potable hot water is circulated through tubes under the floor. The floor absorbs heat from the tubes and radiates it into the room. With radiant baseboard heat, potable hot water is circulated through finned tube baseboard. Heat rises from the baseboard heaters, warming the home. All water components must be approved for use with potable water.
PERFORMANCE
Model| Series| Capacity| Maximum Certified
Altitude| Input| Recovery Rate at 90°F Temperature
Rise| Thermal Efficiency| BC Compliant
---|---|---|---|---|---|---|---
USG| I L| FT (M)| BTU/h| GPH (LPH)
NATURAL GAS
PR100-34-2NV| N/A| 34| 129| 11,000 (3,353)| 100,000| 129 (488)| 96%| Nl
PR130-34-2NV| N/A| 34| 129| 11,000 (3,353)| 130,000| 168 (636)| 96%| Nl
PR150-34-2NV| N/A| 34| 129| 11,000 (3,353)| 150,000| 192 (727)| 95%| Nl
PR130-50-2NV| N/A| 50| 189| 11,000 (3,353)| 130,000| 166 (628)| 95%| NI
For propane models sub N for P. Input, output and recovery may vary depending
upon air inlet and exhaust outlet installations, consult manual for details.
*Model has side connections.
DIMENSIONS & SHIPPING WEIGHT
Model| Height to
Top of Tank| Tank
Diameter| Height to Heating System Return| Height to
Cold Water
Inlet| Height to Heating System Outlet| Height to T&P| Height to Gas
Supply| Height to
Air Inlet| Water
Connections| Gas
Connections| Vent
Diameter| Shipping
Weight
---|---|---|---|---|---|---|---|---|---|---|---|---
A
IN (CM)| B
IN (CM)| C
_ IN (CM)| C
IN (CM)| D
IN (CM)| E
IN (CM)| F
IN (CM)| G
IN (CM)| IN
NPT| IN
NPT| IN| LB (KG)
NATURAL GAS|
PR100-34-2NV| 48’/ (123)| 22 (56)| 15 3/4 (40)| 15 3/4 (40)| 401/2 (103)| 41
(104)| 6 78(16)| 6 V8(16)| 1| 1/2| 2 or 3| 150 (68)
PR130-34-2NV| 48’/ (123)| 22 (56)| 15 3/4 (40)| 15 3/4 (40)| 40’/ (103)| 41
(104)| 61/8(16)| 6 V8(16)| 1| 1/2| 2 or 3| 150 (68)
PR150-34-2NV| 48’/ (123)| 22 (56)| 15 3/4 (40)| 15 3/4 (40)| 40’/ (103)| 41
(104)| 61/8(16)| 6 73(16)| 1| 1/2| 2 or 3| 150 (68)
PR130-50-2NV| 62’/ (159)| 22 (56)| 15 3/4 (40)| 15 V4 (40)| 54’/ (138)| 55
(140)| 61/8(16)| 6 73(16)| 1| 1/2| 2 or 3| 176 (80)
OPTIONAL KITS
Description | Part Number |
---|---|
2” Concentric vent kit | 6911088 |
3” Concentric vent kit | 6911089 |
©2015 A. O. Smith Enterprises Ltd.
NRGSS01008 (06-15)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>