EURofase 45723 Bordo Black w Acrylic Frosted White Shade Wall Mount Instruction Manual
- June 13, 2024
- EUROfase
Table of Contents
EURofase 45723 Bordo Black w Acrylic Frosted White Shade Wall Mount
Product Information
- Product Model: 45723
- Maximum Power: 30W
- Power Source: 120V~, 60Hz
- Light Source: LED
- Usage: Outdoor
- Additional Requirement: Silicone Gel (not included)
Product Usage Instructions
- Before installation, ensure that the silicone gel is available. Please note that the silicone gel is not included with the product.
- Carefully apply the silicone gel around the fixture body where it comes into contact with the wall. This will help provide asecure and waterproof seal.
- Connect the product to a power source with the provided 120V~, 60Hz electrical connection.
- Make sure to use a maximum power of 30W for the LED light source.
- This product is designed for outdoor use only. Do not use it indoors.
Thank You You’ve just purchased a lighting product designed and built to provide you with years of enjoyment.
INSTRUCTIONS
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
- Follow the assembly instructions by reading the numerical order.
- Use a qualified electrician for Installation of this lighting fixture
- Before installing the fixture, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box.
- All electrical connections must be in accordance with local and National Electrical Code or Canadian Electrical Code standards
- Use CSA or UL-certified Wire connectors suitable for the gauge, type, and number of conductors.
- Attach junction box grounding Wire (green or bare copper) and the bare copper Wire from the fixture together. If the junction box has no ground Wire, attach the bare copper fixture Wire to the green ground screw on the crossbar.
Estimated Assembly Time: 20 minutes
Tools Required For Assembly
(not Included):
- Flathead screwdriver,
- Phillips screwdriver,
- Pliers, Electrical tape,
- and Wire cutters.
Helpful Tools (not included):
- Wire strippers, Ladder
30W MAX,LED,120V~,60Hz
(Dimmable LED Included)
- 5 Apply the silicone gel(not included) around the fixture body where it comes into contact with the wall.
- A-Outlet Box screw x 2
- B-Black wire(L) from junction box
- C-White wire(N) from junction box
- D-Green wire/Bare copper (G) from the junction box
- E-Black wire (L) from the fixture
- F-White wire (N) from the fixture
- G-Green wire/Bare copper from the fixture
- H-Wire connector x 3
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>