D-Link DGS-1100-16V2 Smart Managed Ethernet Switch Sepecifications And Datasheet

D-Link DGS-1100-16V2 Smart Managed Ethernet Switch

Description

The DGS-1100 Series is a range of switches designed to meet the requirements of small, medium, and enterprise businesses. Support for multiple PoE standards makes the DGS-1100 Series ideal for IP surveillance deployments. Advanced management features, a range of diagnostic and troubleshooting tools, and energy-efficient technologies provide a flexible solution to meet your networking requirements.

• D-Link Green/Power Saving Performance
  Compliant with IEEE 802.3az Energy Efficient Ethernet (EEE), the DGS-1100 Series consumes less energy by cutting down on power consumption when port utilization is low. By deploying compatible devices, users can cut operating costs and even cut down on additional cooling equipment, helping small and medium-sized businesses stay within their budgets. The DGS-1100 Series also features D-Link Green technology that helps save energy automatically. The switches monitor the link status of every port and significantly reduce the power consumption of the interface when there is no link or network traffic detected.

• Easy to Deploy
  The DGS-1100 Series supports an intuitive client-based utility (D-Link Network Assistant) and a web-based management interface. The client-based D-Link Network Assistant (DNA) discovers all D-Link Smart Managed Switches within the same Layer 2 network segment, making the initial setup quick and easy. This allows extensive switch configuration and basic administration of discovered devices, including password changes and firmware upgrades. The web-based interface provides a user-friendly way for network administrators to manage the switch down to the port level. The interface can be accessed from a web browser, allowing the switches to be controlled from any PC that is connected to the network.

• Surveillance VLAN and Bandwidth Control
  The DGS-1100 Series supports Surveillance VLAN for IP surveillance deployments. This gives video traffic a dedicated VLAN and higher priority through the switch, separating surveillance traffic from the rest of the network. This ensures security and guarantees the quality of the video traffic, sparing businesses the added cost of dedicated surveillance hardware. Bandwidth Control can reserve bandwidth on a per-port basis for important functions that require larger bandwidth or have higher priority.

• Advanced Features
  The DGS-1100 Series is equipped with advanced security features such as Static MAC, Storm Control, and IGMP Snooping. Static MAC allows users to create a MAC whitelist for specific ports, helping administrators limit network access to authorized devices only. Storm Control monitors broadcast, multicast, or unknown unicast traffic and will start blocking or discarding packets which could flood the network when the defined threshold is exceeded. IGMP Snooping is able to reduce the load of L3 multicast routers and save bandwidth in network throughput.

• Easy Troubleshooting
  The DGS-1100 Series features Loopback Detection and Cable Diagnostics to help network administrators find and solve network problems quickly and easily. Loopback Detection is used to detect loops created by a specific port and automatically shuts down the affected port. Cable Diagnostics helps network administrators quickly examine the quality of the copper cables, recognize the cable type, and detect cable errors.

• PoE Support
  The DGS-1100 Series P Model provides Power over Ethernet (PoE) support, reducing deployment time for IP cameras, VoIP phones, and access points. Dedicated power adapters are no longer required, as the DGS-1100-08PV2/24PV2 comply with IEEE 802.3af and 802.3at PoE standards and provide up to 30 watts per port. Additionally, the DGS-1100-05PD can be powered by a PoE switch or injector, allowing for more flexible installation in remote areas with no available power outlets.

• Lifetime Warranty
  D-Link offers a Lifetime Warranty and Next Business Day (NBD) hardware replacement for the DGS-1100 Series Smart Managed Switches to further its commitment to product quality and long-term customer confidence.

Features

Physical

• Available in multiple configurations, with or without PoE and fiber support
• Fanless design for silent operation

Green Technology

• Link status detection
• IEEE 802.3az Energy-Efficient Ethernet compliant
• Time-based PoE (PoE models excluding DGS-1100-08PV2)

Advanced Features

• IGMP Snooping

• Bandwidth Control

• IEEE 802.1Q VLAN traffic segregation

• Port-based VLAN
  IEEE 802.1p Quality of Service

• Surveillance VLAN

• Voice VLAN

Management Features

• Client-based utility or web-based GUI
• Built-in SNMP MIB1

Technical Specifications

General DGS-1100-16V2

• Hardware Version: A1
• Size: 11-inch desktop (rackmount kit included), 1U height
• Number of Ports: 16 x 10/100/1000 Mbps

Port Functions

• IEEE 802.3 for Ethernet
• IEEE 802.3u for Fast Ethernet
• IEEE 802.3ab for Gigabit Ethernet
• IEEE 802.3z for Gigabit fiber
• IEEE 802.3af/at (DGS-1100-24PV2 ports 1 to 12 only)
• IEEE 802.3az compliant
• Auto-negotiation
• Auto MDI/MDIX
• IEEE 802.3x Flow Control supports full-duplex mode
• Supports half/full-duplex operation (full/half at 10/100 Mbps, full at 1000 Mbps)

Performance

• Switching Capacity: 32 Gbps
• Maximum Forwarding Rate: 23.81 Mpps
• MAC Address Table Size: 8K Entries
• Packet Buffer: 4.1 Mbits
• Flash Memory: 16 Mbytes

PoE

• PoE Standard: –
• PoE Capable Ports: –
• PoE Power Budget: –

Power Consumption

• Standby Mode: 3.4 W
• Maximum Power Consumption: 10.1 W

Physical

• Power Input: 100 to 240 V AC, 50 to 60 Hz internal power supply
• MTBF: 710,519 hours
• Acoustics: 0 dB(A)
• Heat Dissipation: 34.46 BTU/hr
• Weight: 1.21 kg (2.67 lbs)
• Dimensions: 280 x 180 x 44 mm (11.02 x 7.08 x 1.73 inches)
• Ventilation: Fanless
• Operating Temperature: -5 to 50 °C (23 to 122 °F)
• Storage Temperature: -40 to 70 °C (-40 to 158 °F)
• Operating Humidity: 0% to 95% non-condensing
• Storage Humidity: 0% to 95% non-condensing
• EMI: FCC Class A, CE Class A, VCCI Class A, C-Tick, BSMI, CCC
• Safety: cUL, CE LVD, CB, BSMI, CCC

0 to 40 °C (32 to 104 °F)
Storage Temperature| • -40 to 70 °C (-40 to 158 °F)
Operating Humidity| •  0% to 90% RH, non-condensing
Storage Humidity| •  0% to 95% RH, non-condensing
EMI| •  FCC Class B, CE Class B, VCCI Class B, BSMI
Safety| •  cUL, CE LVD, CB, BSMI
Software Features (DGS-1100-16V2/24V2/24PV2)

VLAN| •  Port-based VLAN

•  802.1Q tagged VLAN

•  Auto Surveillance VLAN

•  Voice VLAN

•  Management VLAN

| •  Asymmetric VLAN

•  VLAN Group

•  Supports 128 static VLAN groups

•  Max. 4094 VIDs

L2 Features| •  Flow Control

•  802.3x Flow Control

•  HOL Blocking Prevention

•  Jumbo frames up to 10,000 Bytes

•  IGMP Snooping

•  IGMP Snooping V1/V2/V3 awareness

•  Supports 128 Groups

•  IGMP Snooping Querier

•  802.3ad Link Aggregation:

•  Support max 8 groups per device and 8 ports per group

•  Loopback Detection

| •  Cable diagnostics

•  LLDP

•                        Port Mirroring

•  One-to-One

•  Many-to-One

•  Statistics

•  Tx Ok

•  Tx Error

•  Rx Ok

•  Rx Error

•  Spanning Tree Protocol

•  802.1D STP

•  802.1w RSTP

Quality of Service (QoS)| •  802.1p Quality of Service

•  8 queues per port

•  Queue handling

•  Strict

•  Weighted Round Robin (WRR)

| •  Port-based bandwidth control (rate limiting)

•  Ingress: 16 Kbps

•  Egress: 16 Kbps

Security| •  D-Link Safeguard

•  Traffic segmentation

•  Broadcast/Multicast/Unknown Unicast Storm Control

| •  DoS attack prevention

•  SSL

Management| •  Web-based GUI (supports IPv4/IPv6)| •  Client-based D-Link Network Assistant (DNA)
Green Technology| •  Power saving by

•  Link status

•  LED shut-off

•  Port shut-off

•  System hibernation

| •  Compliant with IEEE 802.3az Energy Efficient Ethernet (EEE)

•  Compliant with RoHS 10

MIB/RFC Standards| •  RFC768 UDP

•  RFC791 IP

•  RFC792 ICMP

•  RFC793 TCP

•  RFC826 ARP

•  RFC1213 MIB II

•  RFC1493 Bridage MIB

•  RFC1907 SNMPv2 MIB

•  RFC1215 MIB Traps Convention

| •  RFC2233 Interface Group MIB

•  RFC2665 Ether-like MIB

•  RFC4363 IEEE 802.1p MIB

•  ZoneDefense MIB

•  Private MIB

•  RFC951 BootP client

•  RFC1542 BootP/DHCP client

•  RFC2236 IGMP Snooping

Warranty Information

Warranty| Lifetime Warranty2
Order Information|
Part Number| Description
DGS-1100-05V2| 5 x 10/100/1000 Mbps ports
DGS-1100-05PDV2| 2x 10/100/1000 Mbps PoE ports + 3 x 10/100/1000 Mbps ports with port 5 as PD port
DGS-1100-08V2| 8 x 10/100/1000 Mbps ports
DGS-1100-08PV2| 8 x 10/100/1000 Mbps PoE ports
DGS-1100-16V2| 16 x 10/100/1000 Mbps ports
DGS-1100-24V2| 24 x 10/100/1000 Mbps ports
DGS-1100-24PV2| 12 x 10/100/1000 Mbps PoE ports + 12 x 10/100/1000 Mbps ports

1. Supported by the DGS-1100-16V2/24V2/24PV2.
2. Lifetime warranty is available in the USA only. The warranty is void when not purchased from an authorized US D-Link reseller. Please visit us.dlink.com for a list of authorized US resellers.

For More Information

• Address: U.S.A. | 17595 Mt. Herrmann Street | Fountain Valley, CA 92708
• Phone: 800.326.1688
• Website: dlink.com

Trademark

Specifications are subject to change without notice. D-Link is a registered trademark of D-Link Corporation and its overseas subsidiaries. All other trademarks belong to their respective owners. ©2020 D-Link Corporation. All rights reserved. E&OE.

FAQs

What is the D-Link DGS-1100-16V2 Smart Managed Ethernet Switch?

The D-Link DGS-1100-16V2 is a smart managed Ethernet switch designed for small and medium-sized businesses, offering advanced network management features.

How many ports does this switch have?

The switch typically features 16 Ethernet ports, allowing you to connect multiple devices to your network.

What type of Ethernet ports are available on the DGS-1100-16V2?

The switch usually provides a combination of Gigabit Ethernet ports, including both Gigabit copper and Gigabit SFP fiber ports for versatile network connectivity.

Is this switch suitable for both small businesses and home use?

Yes, the DGS-1100-16V2 is designed for small businesses and can also be used in home network setups that require advanced features.

What is the maximum data transfer rate supported by this switch?

The switch typically supports data transfer rates of up to 1 Gbps, ensuring fast and reliable network performance.

Does it support Power over Ethernet (PoE)?

No, the DGS-1100-16V2 does not support Power over Ethernet (PoE). It provides standard Ethernet connectivity.

Can I manage this switch remotely?

Yes, the switch often includes remote management capabilities, allowing you to configure and monitor your network from a remote location.

What management features are available with this switch?

The switch typically offers various management features, including VLAN support, Quality of Service (QoS), and network monitoring, among others, for efficient network management.

Is the switch compatible with both IPv4 and IPv6 protocols?

Yes, the DGS-1100-16V2 often supports both IPv4 and IPv6, ensuring compatibility with modern networking standards.

What is the maximum power consumption of the switch?

The maximum power consumption may vary, but the switch typically has a power- efficient design, consuming a reasonable amount of energy.

Is there a fan in the switch for cooling?

No, the DGS-1100-16V2 often features a fanless design, providing silent and reliable operation.

What is the warranty period for this switch?

The D-Link DGS-1100-16V2 Smart Managed Ethernet Switch typically comes with a warranty of Limited Lifetime from the date of purchase.

Is this switch rack-mountable?

Yes, the D-Link DGS-1100-16V2 is often designed to be rack-mounted for convenient installation in network racks and cabinets.

References:D-Link DGS-1100-16V2 Smart Managed Ethernet Switch – Device.report

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>