EUROfase 46762 Chandelier Bees Lighting Instruction Manual
- June 13, 2024
- EUROfase
Table of Contents
EUROfase 46762 Chandelier Bees Lighting
Product Information
- You’ve just purchased a lighting product designed and built to provide you with years of enjoyment.
- This lighting fixture requires 9 bulbs with a maximum wattage of 40W each. The bulb type is B10, and it operates on 120V at 60Hz.
- Estimated Assembly Time: 20 minutes
Tools Required For Assembly (not included):
- Flathead screwdriver
- Phillips screwdriver
- Pliers
- Electrical tape
- Wire cutters
Product Usage Instructions
- Follow the assembly instructions by reading the numerical progression.
- Use a qualified electrician for the installation of this lighting fixture.
- Before installing the fixture, disconnect the power by turning off the circuit breaker or removing the fuse at the fuse box.
- All electrical connections must be in accordance with local and National Electrical Code or Canadian Electrical Code standards.
- Use CSA or UL-certified wire connectors suitable for the gauge, type, and number of conductors.
- If the junction box has a ground wire, attach the junction box grounding wire (green or bare copper) and the bare copper wire from the fixture together.
- If the junction box has no ground wire, attach the bare copper fixture wire to the green ground screw on the crossbar.
Thank You
You’ve just purchased a lighting product designed and built to provide you
with years of enjoyment.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
Safety Instruction
- Follow the assembly instructions by reading the numerical progression.
- Use a qualified electrician for installation of this lighting fixture.
- Before installing fixture, disconnect power by turning off the circuit breaker or by removing the fuse at the fuse box.
- All electrical connections must be in accordance with local and National Electrical Code or Canadian Electrical Code standards.
- Use CSA or UL certified wire connectors suitable for the gauge, type and number of conductors.
- Attach the junction box grounding wire (green or bare copper) and the bare copper wire from the fixture together.If junction box has no ground wire, attach the bare copper fixture wire to the green ground screw on the crossbar.
Estimated Assembly Time: 20 minutes
Tools Required For Assembly (not included): Flathead screwdriver, Phillips
screwdriver, Pliers, Electrical tape and Wire cutters. Helpful Tools (not
included): Wire strippers, Ladder.
Assembling Instruction
-
A-Outlet box screw x 2
-
B-Black wire (L) from junction box
-
C-White wire (N) from junction box
-
D-Green wire/bare copper (G) from junction box
-
E-Black wire (L) from fixture
-
F-White wire (N) from fixture
-
G-Green wire/Bare copper from fixture
-
H-wire connector x 3
-
A-Outlet box screw x 2
-
B-Black wire (L) from junction box
-
C-White wire (N) from junction box
-
D-Green wire/bare copper (G) from junction box
-
E-Black wire (L) from the fixture
-
F-White wire (N) from the fixture
-
G-Green wire/Bare copper from the fixture
-
H-wire connector x 3
Attached map
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>