dji 02 Smart Controller User Guide

: June 13, 2024
: DJi

Table of Contents

02 Smart Controller
Product Information
Product Usage Instructions
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

02 Smart Controller

Product Information

The DJI Smart Controller is a remote controller designed for use
with aircraft that support OcuSync 2.0 technology. It features a
wide range of function buttons and can control the aircraft within
a maximum range of 8 km. The controller supports Wi-Fi and
Bluetooth connections, and it has a built-in microphone and speaker
for video and audio management. It is capable of displaying 4K
videos at 60 fps in both H.264 and H.265 formats and can be
connected to an external monitor via the HDMI port. The storage
capability of the Smart Controller can be expanded using a microSD
card, allowing users to store more images and videos and easily
export them to a computer. It is also compatible with various DJI
aircraft models, including the Mavic 2 Pro, Mavic 2 Zoom, Mavic Air
2, Mavic 2 Enterprise series, and Phantom 4 Pro v2.0. Additionally,
it supports viewing HDMI live broadcasts by connecting DJI FPV
goggles to the Smart Controller.

Product Usage Instructions

Preparing the Smart Controller:
- Charge the battery by following the instructions in the user
  manual.
- Attach the control sticks to the Smart Controller.
Turning the Smart Controller On and Off:
- To turn on the Smart Controller, press and hold the power
  button until the LED indicators light up.
- To turn off the Smart Controller, press and hold the power
  button until the LED indicators turn off.
Activating the Smart Controller:
- Follow the instructions provided by the DJI Assistant 2
  software to activate the Smart Controller.
Linking the Smart Controller:
- Refer to the user manual for detailed instructions on how to
  link the Smart Controller with your aircraft.
Controlling the Aircraft:
- Use the function buttons and control sticks on the Smart
  Controller to control the aircraft’s movements and perform various
  tasks.
Operating the Camera:
- Refer to the user manual for detailed instructions on how to
  operate the camera using the Smart Controller.
Dual Remote Controller Mode:
- If using dual remote controllers, refer to the user manual for
  instructions on how to enable and use dual remote controller
  mode.
Display Interface:
- Explore the homepage and quick settings of the Smart
  Controller’s display interface to access various features and
  settings.
DJI GO 4 App / DJI Pilot:
- To access additional features and settings, download and
  install the DJI GO 4 App or DJI Pilot on your mobile device or
  tablet.
Appendix:
- Refer to the user manual’s appendix section for information on
  changing storage locations, control stick navigation, DJI GO Share,
  status LED and battery level indicators, smart controller warning
  sounds, system update, button combinations, calibrating the
  compass, blocking third-party notifications, HDMI usage,
  after-sales information, and specifications.

DJI Smart Controller
User Manual v1.6
2021.01

Searching for Keywords
Search for keywords such as “battery” and “install” to find a topic. If you are using Adobe Acrobat Reader to read this document, press Ctrl+F on Windows or Command+F on Mac to begin a search.
Navigating to a Topic
View a complete list of topics in the table of contents. Click on a topic to navigate to that section.
Printing this Document
This document supports high resolution printing.

Using this Manual

Legends

Warning

Important

Hints and Tips

Explanation

Video Tutorials
Please watch the tutorial videos in the link below, which demonstrate how to use this product safely: https://www.dji.com/smart- controller?site=brandsite&from=nav
Download DJITM ASSISTANTTM 2
Download DJI Assistant 2 at http://www.dji.com/dji-smart-controller

1

Contents

Using this Manual

1

Legends

1

Video Tutorials

1

Download DJITM ASSISTANTTM 2

1

Contents

2

Product Profile

3

Introduction

3

Overview

4

Preparing the Smart Controller

6

Charging the Battery

6

Attaching the Control Sticks

6

Smart Controller Operations

7

Turning the Smart Controller On and Off

7

Activating the Smart Controller

7

Linking the Smart Controller

8

Controlling the Aircraft

8

Operating the Camera

12

Dual Remote Controller Mode

13

Display Interface

14

Homepage

14

Quick Settings

15

DJI GO 4 App / DJI Pilot

16

Appendix

17

Changing Storage Locations for Images and Videos

17

Control Stick Navigation

17

DJI GO Share (only available when using DJI GO 4)

17

Status LED and Battery Level Indicators Description

18

Smart Controller Warning Sounds

19

System Update

19

Button Combinations

19

Calibrating the Compass

20

Blocking Third-party Notifications

21

HDMI

21

After-sales Information

21

Specifications

22

Product Profile

Introduction

The DJI Smart Controller features OCUSYNCTM 2.0 technology and is compatible with aircraft which support OcuSync 2.0. With a wide range of function buttons, the remote controller can perform a variety of tasks and control the aircraft within a maximum range of 8 km. Dual transmission frequency support makes HD video downlink stable and reliable.
Ultra-bright Screen: The built-in 5.5 inch screen boasts a high brightness of 1000 cd/m² and a resolution of 1920×1080 pixels.
Multiple Connections: The Smart Controller supports Wi-Fi and Bluetooth connections.
Video and Audio Management: The Smart Controller has a built-in microphone and speaker, and is capable of displaying 4K videos at 60 fps both in H.264 and H.265 formats. In addition, the videos can be displayed on an external monitor by using the HDMI port.
Extended Storage Capability: The Smart Controller’s storage capability can be increased by using a microSD card. This allows users to store more images and videos and makes it easier to export them to a computer.
Reliable in More Environments: The Smart Controller can operate normally within a wide temperature range from -4° F (-20° C) to 104° F (40° C).
Compatible with More DJI Aircrafts: With the Aircraft Management feature of Smart Controller, users can add and manage more aircraft models. The Mavic 2 Pro, Mavic 2 Zoom, Mavic Air 2, Mavic 2 Enterprise series and Phantom 4 Pro v2.0 are supported.
Support DJI FPV Goggles: Support to view HDMI live broadcast by connecting the goggles (v01.00.05.00 or above) to the DJI Smart Controller (v01.00.07.00 or above). By connecting the goggles to the DJI Smart Controller using USB-C cable, users can see the camera view of the air unit on the screen of the Smart Controller, and then can transmit the live view from the Smart Controller to other display devices through an HDMI cable.
DJI GO Share: The brand new DJI GO Share function of the built-in DJI GO 4 App enable users to transfer images and videos to smart devices after they have been downloaded from playback in DJI GOTM 4.
SkyTalk: Go to DJI Lab under settings to enable. Once SkyTalk is enabled, the live view from the aircraft can be shared with friends via third-party social media apps. This feature is not available for enterprise aircrafts.
Maximum flight time was tested in windless conditions at a consistent speed of 15.5 mph (25 kph) using the MAVICTM 2. This value should be taken for reference only. Refer to Specifications to check compatible aircrafts models. To comply with local regulations, the 5.8 GHz frequency is not available in some countries and regions. 4K/60fps is supported for non HDR 10 bit videos. When selecting HDR 10 bit videos, only 4k/30fps is available. The main difference between linking the Smart Controller with the Mavic 2 Pro/Zoom//Mavic Air 2/Phantom 4 Pro v2.0 and the Smart Controller with the Mavic 2 Enterprise series, is the built-in app used for flight. The Mavic 2 Pro/Zoom and the Phantom 4 Pro v2.0 use the DJI GO 4 app, the Mavic Air 2 uses DJI Fly, and the Mavic 2 Enterprise series uses DJI Pilot. The general descriptions in this manual apply to all aircraft models that link to the Smart Controller.

3

DJI Smart Controller User Manual

Overview

1

78

23

4

10

11

5 69

102

103 14 15

1 Antennas Relays aircraft control and video signal.
2 Back Button / Function Button Press once to return to the previous page and press twice to go back to the homepage. Hold to view a guide to using button combinations. Refer to the Button Combinations section for more information.
3 Control Sticks Control the orientation and movement of the aircraft when the remote controller is linked to an aircraft. Go to Settings > Control Stick Navigation, to customize the navigation settings.
4 RTH Button Press and hold to initiate Return to Home (RTH). Press again to cancel RTH.
5 Flight Pause Button Press once to exit TapFly, ActiveTrack, and other Intelligent Flight Modes.
6 Flight Mode Switch Switch between T-mode, P-mode, and S-mode.
7 Status LED Indicates the linking status and warnings for the control sticks, low battery level, and high temperature.
4 © 2020 DJI All Rights Reserved.

8 Battery Level LEDs Displays the battery level of the remote controller.
9 5D Button The default configuration is listed below. The functions can be set in DJI GO 4 /DJI Pilot / DJI Fly. Up: Recenter gimbal/move gimbal downward Down: Focus switch/metering Left: Decrease EV value Right: Increase EV value Press: Open DJI GO 4 /DJI Pilot / DJI Fly Intelligent Flight Modes menu (not available for Mavic 2 Enterprise series. Phantom 4 Pro v2.0: This 5D button is not available when DJI GO 4 is in use. When the remote controller is not linked to an aircraft, the 5D button can be used to navigate on the remote controller. Go to Settings > Control Stick Navigation to enable this function.
10 Power Button Use to turn the remote controller on and off. When the remote controller is powered on, press the button to enter sleep mode or to wake up the controller.
11 Confirm Button / Customizable Button C3* When the remote controller is not linked to an aircraft, press to confirm a selection. When linked to an aircraft, the button cannot be used to confirm a selection. However, the function of the button when linked to an aircraft can be customized in DJI GO 4 /DJI Pilot / DJI Fly.

This Confirm button can be customized in future firmware.

DJI Smart Controller User Manual

16

22

18 19 20

17

21

23 24 25 26 27
28

12 Touchscreen Tap to select.
13 USB-C Port Use to charge or update the remote controller.
14 Microphone Records audio.
15 Screw Holes

Mavic Air 2/Mavic 2 Zoom/Mavic 2 Enterprise: Turn to adjust the zoom of the camera. Mavic 2 Enterprise Dual: Turn the dial to adjust the exposure compensation. Phantom 4 Pro v2.0: Use to control the camera’s roll.
23 Air Vent Used for heat dissipation. DO NOT cover the air vent during use.

16 Gimbal Dial Use to control the camera’s tilt.

24 Sticks Storage Slot Use to store a pair of control sticks.

17 Record Button Press to start recording video. Press again to stop recording.
18 HDMI Port For video output.
19 microSD Card Slot Use to insert a microSD card.
20 USB-A Port Use to connect external devices.

25 Customizable Button C2 The default configuration is playback. The configuration can be set in DJI GO 4 /DJI Pilot / DJI Fly.
26 Speaker Outputs sound.
27 Customizable Button C1 The default configuration is center focus. The configuration can be set in DJI GO 4 / DJI Pilot / DJI Fly.

21 Focus/Shutter Button Half press to focus, and then press to take a photo.

28 Air Intake Used for heat dissipation. DO NOT cover the air intake during use.

22 Camera Settings Dial/Gimbal Dial (Depends on connected aircraft type) Mavic 2 Pro: Turn the dial to adjust the exposure compensation (when in Program mode), aperture (when in Aperture Priority and Manual mode), or shutter (when in Shutter Priority mode).

5

Preparing the Smart Controller
Charging the Battery
There are two pairs built-in 2500 mAh Li-ion batteries in the remote controller. Please charge the remote controller using the USB-C port.
Charging Time: 2 hours (using a standard USB power adapter)

Power Outlet 100 ~ 240 V

USB Power Adapter

USB-C Cable

Please use a DJI offical USB power adapter to charge the remote controller. If not, a USB power adapter certified FCC/CE rated 12 V/2 A is recommended. The battery will deplete when stored for an extended period of time. Please recharge the battery at least once every three months to prevent over discharging.

Attaching the Control Sticks
Two pairs of control sticks are included in the packaging for the Smart Controller. One pair is stored in the sticks storage slot on the back of the remote controller. Follow the steps below to attach the control sticks stored in the sticks storage slot to the remote controller.

Lift the antennas

Remove the control sticks

Rotate to attach the control sticks

Smart Controller Operations
Turning the Smart Controller On and Off
Follow the steps below to turn the remote controller on and off. 1. Press the power button once to check the current battery level. Charge the remote controller if
the battery level is too low. 2. Hold the power button or press once and then hold the power button to power on the remote
controller. 3. Repeat Step 2 to power off the remote controller.

Activating the Smart Controller
The Smart Controller needs to be activated before using for the first time. Make sure the Internet remote controller can connect to the internet during activation. Follow the steps below to
activate the Smart Controller.
1. Power on the remote controller. Select the language and tap “Next”. Carefully read the terms of use and privacy policy and tap “Agree”. After confirming, set the country/region.
2. Connect the remote controller to the internet via Wi-Fi. After connecting, tap “Next” to continue and select the time zone, date, and time.
3. Log in with your DJI account. If you do not have an account, create a DJI account and log in. 4. Tap “Activate” on the activation page. 5. After activating, please select if you would like to join the Smart Controller Improvement Project.
The project helps to improve the user experience by sending diagnostic and usage data automatically every day. No personal data will be collected by DJI. 6. The remote controller will check for firmware updates. If a firmware update is available, you will be prompted to download the latest version.
Please check the internet connection if the activation fails. If the internet connection is normal, please try to activate the remote controller again. Contact DJI if the activation continues to fail.

7

DJI Smart Controller User Manual
Linking the Smart Controller
When the Smart Controller is purchased together with an aircraft, the remote controller has already been linked to the aircraft, and they can be directly used after activating the remote controller and aircraft. If the Smart Controller and the aircraft were purchased separately, follow the steps below to link the remote controller to the aircraft.
Method 1: Using Smart Controller Buttons 1. Power on the remote controller and the aircraft. 2. Press the customizable button C1, C2, and Record button simultaneously. The status LED blinks
blue and the controller beeps twice to indicate the linking has started. 3. Press the linking button on the aircraft. The remote controller’s status LED will be solid green if
the linking is successful.
Method 2: Using DJI GO 4 /DJI Pilot / DJI Fly 1. Power on the remote controller and the aircraft. Tap “Go” on the homepage and log in using a
DJI account. 2. Tap “Enter Device”, select “Connect to the aircraft”, and follow the prompts to start linking. 3. Select “Enter the Camera View” and tap in camera view. Scroll to the bottom, tap “Remote
Controller Linking” and tap “OK” to confirm. 4. The status LED blinks blue and the remote controller beeps twice to indicate the linking has
started. 5. Press the linking button on the aircraft. The remote controller’s status LED will be solid green if
the linking is successful.
Method 3: Using Quick Settings 1. Power on the remote controller and the aircraft. 2. Swipe down from the top of the screen to open Quick Settings. Tap to start linking. 3. The status LED blinks blue and the remote controller beeps twice to indicate the linking has
started. 4. Press the linking button on the aircraft. The remote controller’s status LED will be solid green if
the linking is successful.
Make sure the remote controller is within 1.6 ft (0.5 m) of the aircraft during linking. Make sure the remote controller is connected to the internet when logging in using a DJI account.
Controlling the Aircraft
The control sticks control the aircraft’s orientation (yaw), forward and backward movement (pitch), altitude (throttle), and left and right movement (roll). The control stick mode determines the function of each control stick. Three preprogrammed modes (Mode 1, Mode 2, and Mode 3) are available and custom modes can be configured in DJI GO 4 /DJI Pilot / DJI Fly. The default mode is Mode 2.

DJI Smart Controller User Manual

In each of the three pre-programmed modes, the aircraft hovers in place at a constant orientation when both sticks are centered. See the figures below to see the function of each control stick in the three preprogrammed modes.

Mode 1

Left Stick

Forward

Right Stick
UP

Backward

Mode 2

Turn Left

Turn Right

Left Stick
UP

Down

Left

Right

Right Stick

Forward

Down

Mode 3

Turn Left

Turn Right

Left Stick

Forward

Backward

Left

Right

Right Stick
UP

Backward

Down

Left

Right

Turn Left

Turn Right

The figure below explains how to use each control stick. Mode 2 has been used as an example.

9

DJI Smart Controller User Manual
Center position: Control sticks are centered. Moving the control stick: Control sticks are pushed away from the center.

Control Stick Mode 2 Left Stick

Aircraft
UP Down

Remarks
Moving the left stick up or down changes the aircraft’s altitude. Push the stick up to ascend and down to descend. The more the stick is pushed away from the center position, the faster the aircraft changes altitude. Push the stick gently to prevent sudden and unexpected changes in altitude.

Left Stick Right Stick Right Stick

Turn Left

Turn Right

Moving the left stick to the left or right controls the orientation of the aircraft. Push the stick left to rotate the aircraft counter-clockwise and right to rotate the aircraft clockwise. The more the stick is pushed away from the center position, the faster the aircraft rotates.

Forward Backward

Moving the right stick up and down changes the aircraft’s pitch. Push the stick up to fly forward and down to fly backward. The more the stick is pushed away from the center position, the faster the aircraft moves.

Moving the right stick to the left or right changes the

aircraft’s roll. Push the stick left to fly left and right to

fly right. The more the stick is pushed away from the

Left

Right

center position, the faster the aircraft moves.

Keep the remote controller away from magnetic materials to avoid it being affected by magnetic interference. To avoid damage, it is recommended that the control sticks are removed and stored in the storage slot on the remote controller during transportation or storage.
Flight Mode Switch Toggle the switch to select the flight mode. Choose between T-mode, P-mode, and S-mode.

DJI Smart Controller User Manual

PositionTT PositionPP PositionSS

Position T P S

Flight Mode T-mode (Tripod) P-mode (Positioning) S-mode (Sport)

T-mode (Tripod): The aircraft utilizes GPS and vision systems to locate itself, stabilize, and navigate between obstacles. In this mode, the maximum flight speed is limited to 2.2 mph (3.6 kph). The responsiveness to stick movements is also reduced for smoother, more controlled movement. P-mode (Positioning): P-mode works best when the GPS signal is strong. The aircraft utilizes GPS, Vision Systems, and an Infrared Sensing System to stabilize, avoid obstacles, and track moving subjects. Advanced features such as TapFly and ActiveTrack are available in this mode. S-mode (Sport): The handling gain values of the aircraft are adjusted to enhance aircraft maneuverability. Note that Vision Systems are disabled in this mode.
Regardless of the position the switch is in on the remote controller, the aircraft begins in P-mode by default. To switch flight modes, first go to camera view in DJI GO 4 /DJI Pilot / DJI Fly, tap and enable “Multiple Flight Modes”. After enabling multiple flight modes, toggle the switch to P and then to S or T to switch flight modes.
Refer to the flight modes section in the aircraft’s user manual for more information about flight mode features for different aircraft types.
RTH Button Press and hold the RTH button to start Return to Home (RTH) and the aircraft will return to the last recorded Home Point. Press the button again to cancel RTH and regain control of the aircraft. Refer to the Return to Home section in the aircraft’s user manual for more information about RTH.

11

DJI Smart Controller User Manual
Customizable Buttons There are three customizable buttons on the controller: C1, C2, and the Confirm button. When the remote controller is not linked to an aircraft, press the Confirm button to confirm a selection. When the remote controller is linked to an aircraft, the button cannot be used to confirm a selection. However, the function of the button when linked to an aircraft can be customized in DJI GO 4 /DJI Pilot / DJI Fly. The functions of the C1 and C2 buttons are set in DJI GO 4 /DJI Pilot / DJI Fly. The default configuration for the C1 button is center focus and the default configuration for the C2 button is playback.
Optimal Transmission Range The optimal transmission range of the Smart Controller is shown below:
80°
Make sure the antennas are facing towards the aircraft. When the angle between the antennas and the back of the Smart Controller is 80° or 180°, the connection between the remote controller and the aircraft can reach its optimal performance. Note that the illustrations above do not reflect the actual distances between the user and aircraft and are for reference only.
DJI GO 4 /DJI Pilot / DJI Fly will warn the user when the transmission signal is weak. Adjust the antennas to make sure that the aircraft is within the optimal transmission range.
Operating the Camera
Shoot videos and photos with the Focus/Shutter button and Record button on the remote controller. 1. Focus/Shutter Button
Press to take a photo. If Burst mode is selected, multiple photos will be taken if the button is continuously pressed. 2. Record Button Press once to start recording video and press again to stop. 3. Camera Settings Dial Mavic 2 Pro: Turn the dial to adjust the exposure compensation (when in Program mode), aperture (when in Aperture Priority and Manual mode), or shutter (when in Shutter Priority mode). Mavic Air 2/Mavic 2 Zoom/Mavic 2 Enterprise: Turn to adjust the zoom of the camera. Mavic 2 Enterprise Dual: Turn the dial to adjust the exposure compensation. Phantom 4 Pro v2.0: Use to control the camera’s roll. 12 © 2020 DJI All Rights Reserved.

DJI Smart Controller User Manual
Dual Remote Controller Mode
DJI Smart Controller supports Dual Remote Controller Mode when using with the Mavic 2 Pro/Zoom, which allows two remote controllers to connect to the same aircraft.

Both the Primary remote controller and the Secondary remote controller can control the orientation of the aircraft and the movement of the gimbal and camera operation.

Please note the different operations of the Primary and Secondary remote controller listed below.
1. Gimbal Dial Both the Primary remote controller and the Secondary remote controller can control the gimbal dial, but the Primary remote controller has priority. For example, the Secondary remote controller is unable to control the gimbal dial when the Primary remote controller is using the gimbal dial. After the Primary remote controller has stopped controlling the gimbal dial for two seconds or more, the Secondary remote controller can control the gimbal dial.
2. Control Stick Both the Primary remote controller and the Secondary remote controller can control the orientation of the aircraft using control sticks. The Primary remote controller has priority. The Secondary remote controller is unable to control the aircraft’s orientation when the Primary remote controller is operating the control sticks. After the control sticks are idle for two seconds or more, the Secondary remote controller can control the aircraft’s orientation. If the control sticks on the Primary remote controller are pushed down and inward, the motors of the aircraft stop. If the same action is performed on the Secondary remote controller, however, the aircraft does not respond. The control sticks on the Primary remote controller need to be released so that the Secondary remote controller can control the aircraft.
3. Flight Mode Switch The flight mode can only be switched on the Primary remote controller. The Flight Mode Switch is disabled on the Secondary remote controller.
4. DJI GO 4 Settings The display and parameter settings for the Primary and Secondary remote controllers in DJI GO 4 are the same. The Secondary remote controller can only configure the flight controller, vision system, video transmission, and Intelligent Flight Battery. Display and parameter settings for the Primary and Secondary remote controllers are the same in DJI GO 4.

13

Display Interface

Homepage

The screen displays the homepage when the Smart Controller is powered on. Example: Mavic 2 Pro
5

1

11:30

100%

2

GO

1 Time Displays local time.
2 DJI GO 4 /DJI Pilot / DJI Fly Tap to enter DJI GO 4 /DJI Pilot / DJI Fly. The button is blue if the remote controller is linked to the aircraft. Users can tap to enter camera view after logging in using a DJI account. If the remote controller is not linked to the aircraft, tap, and log in using a DJI account. Select “Enter Device” and follow the prompts to enter camera view.

3

4

3 Gallery Tap to check stored images and videos.
4 App Center Tap to check all applications including DJI GO 4 /DJI Pilot / DJI Fly, Settings, File Manager, and any third-party apps that users have downloaded and installed. Refer to the App Center section for more information.
5 Battery Level Displays the battery level of the remote controller.

Navigate on the remote controller by using the 5D button, the control sticks, or touching the screen. Confirm a selection by pressing the 5D button or touching the screen. Refer to the Control Stick Navigation section for more information. QuickFly can be enabled in settings. Once enabled, the remote controller automatically enters the camera view of DJI GO 4 after powering on if the remote controller is already paired with the aircraft. This feature is only availabe when using DJI GO 4.

DJI Smart Controller User Manual
App Center Tap to enter App Center. Users can find default system apps and third-party apps that have been downloaded.
Apps

DJI GO 4.0

DJI Pilot

Settings

Gallery

Camera

The App Center is subject to change in future
Press the icon to enter the app. To move an app, hold the icon and move the app to where you wish to place it. To delete the app, hold the icon and drag it to the top of this page to remove it. Note that default system apps cannot be deleted. Press Settings to be able to configure settings such as button combinations, control stick navigation, date & time, languages, Wi-Fi, and Bluetooth.
DJI bears no responsibility for the safe use of or compatibility support for third-party apps. If a third-party app is affecting the performance of the Smart Controller, try to delete the thirdparty apps or reset the Smart Controller to factory settings. To reset the Smart Controller to factory settings, go to Factory Data Reset under Settings.

Quick Settings
Swipe down from the top of the screen to open Quick Settings. 45

11:30

8:13 PM
Sat, Mar 30

99+ Darkpart

100%

1

Wi-Fi

SRE

Bluetooth

HDMI

Linking

Go-Share

Capture

Record

FN

Control Stick

Recent

Settings

Calibration

2

100%

3

100%

GO

15

DJI Smart Controller User Manual
1 Tap an icon to enable or disable the corresponding function. Hold the icon to enter the settings of the function (if available). : Tap to enable or disable Wi-Fi. Hold to enter settings and connect to or add a Wi-Fi network. : Tap to enable or disable SRE mode. Hold to enter settings and select an SRE mode. : Tap to enable or disable Bluetooth. Hold to enter settings and connect with nearby Bluetooth devices. : Tap to enable or disable the HDMI connection. Hold to enter settings and adjust HDMI resolution, rotation, output mode, and screen zoom. : Tap to start linking the remote controller to an aircraft. : Tap to activate DJI GO Share. Hold to enter settings and set a GO Share Hotspot. Refer to the DJI GO Share section for more information. : Tap to screenshot the screen. : Tap to start recording the screen. While recording, the screen displays the recording time. Tap “Stop” to stop recording. : Tap or hold to check the button combinations. : Tap to calibrate the sticks and wheels. : Tap to check recently opened apps. : Tap or hold to enter settings.
2 Adjusting Brightness Slide the bar to adjust brightness. The icon means auto brightness. Tap this icon or slide the bar, and the icon will turn to to switch it to manual brightness mode.
3 Adjusting Volume Slide the bar to adjust the volume. Tap to mute the volume.
4 Homepage : Tap to go back to the homepage.
5 Notifications : Tap to check system notifications.
SRE (Sunlight Readable Enhancement) allows users to bump up the highlights or shadows of an image individually or together. This helps users see particular areas of the screen more clearly when sunlight is strong. Quick Settings vary depending on the aircraft model linked and the firmware version of the Smart Controller.

DJI GO 4 App / DJI Pilot
To enter DJI GO 4 /DJI Pilot / DJI Fly, tap “Go” on the homepage or tap on the homepage, then tap DJI GO 4 /DJI Pilot / DJI Fly. In DJI GO 4 /DJI Pilot / DJI Fly, you can check the flight status and set flight and camera parameters. Since the Smart Controller is compatible with multiple aircraft models, and the interface of DJI GO 4 /DJI Pilot / DJI Fly may change based on the aircraft model, refer to the DJI GO 4 /DJI Pilot / DJI Fly app section in the aircraft’s user manual for more information.

Appendix
Changing Storage Locations for Images and Videos
After linking, you can use DJI GO 4/DJI Fly to select to store images and videos on the aircraft. Users can also use DJI GO 4/DJI Fly to select to store images and videos to the Smart Controller or on the microSD card in the Smart Controller.
Auto Sync HD Photos: Power on the remote controller and the aircraft, and make sure they are linked. Run DJI GO 4/DJI Fly, and enter the camera view. Tap > and enable “Auto Sync HD Photos”. All images will be stored in high resolution to the microSD card in the remote controller at the same when the microSD card in the aircraft stores the images.
Store to Smart Controller: Power on the remote controller and the aircraft, and make sure they are linked. Run DJI GO 4/DJI Fly, and enter camera view. Tap > : To cache images and videos to the remote controller, enable “Cache Locally When Recording”. To store images and videos to the microSD card in the remote controller, enable “Download Footage to External SD Card”. When “Download Footage to External SD Card” is enabled, all the selected images will be downloaded to the remote controller’s microSD card when downloading the images to the remote controller in playback.
The “Cache Locally When Recording” and “Download Footage to External SD Card” are disabled by default. To enable “Download Footage to External SD Card”, make sure a microSD card is inserted into the remote controller.

Control Stick Navigation
Tap Control Stick Navigation in Settings. Users can enable or disable the control sticks and 5D button to navigate on the remote controller. Control Stick Navigation is not available when the remote controller is linked to an aircraft, even if it is enabled beforehand. Control Sticks: Move up, down, right, or left to navigate. It is not possible to confirm a selection with the control sticks. 5D Button: Push up, down, right, or left to navigate. Press to confirm a selection.
As the control sticks and 5D button may not be compatible with third-party apps, it is recommended to use the touchscreen to navigate when using third- party apps.

DJI GO Share (only available when using DJI GO 4)

The videos and images downloaded to the Smart Controller from DJI GO 4 can be wirelessly transferred to other smart devices. Follow the steps below to use DJI GO Share.

1. Power on the remote controller and swipe down from the top of the screen to open Quick Settings. Tap and a QR code will appear.

17

DJI Smart Controller User Manual
2. Run DJI GO 4 on your smart device and scan the QR code using DJI GO 4. 3. Wait until the remote controller and the smart device are successfully connected. After
connecting, you can check all the images and videos downloaded to the remote controller on your smart device. 4. Select the images and videos you want to share and tap “Download” to download them to your smart device.
Only images and videos cached or downloaded to your remote controller in playback in DJI GO 4 can be shared using DJI GO Share.
Status LED and Battery Level Indicators Description

Status LED

Battery Level Indicators

The battery level indicators displays the battery level of the controller. The status LED displays the linking status and warnings for control stick, low battery level, and high temperature.

Status LED Solid Red Solid Green Blinks Blue
Blinks Red
Blinks Yellow Blinks Cyan

Description The remote controller is not linked to an aircraft.
The remote controller is linked to an aircraft. The remote controller is linking to an aircraft. The temperature of the remote controller is too high or the
battery level of the aircraft is low. The battery level of the remote controller is low.
The control sticks are not centered.

Battery Level Indicators

Battery Level 75%~100% 50%~75% 25%~50%
0%~25%

DJI Smart Controller User Manual
Smart Controller Warning Sounds
In certain scenarios that require a user warning, the Smart Controller will do so by vibrating and/or beeping. When the controller beeps and the status LED is solid green, this error may be related to the aircraft or flight status, and a warning will appear in DJI GO 4 /DJI Pilot / DJI Fly. If this error is related to the Smart Controller, the controller’s screen will display a warning or alert. To disable the beeping, power on the remote controller, select “Sound” in Settings, and turn off “Notification volume”.
System Update
Method 1: Wireless Update Make sure the remote controller is connected to the internet while updating. 1. Power on the remote controller. Tap and then . Scroll to the bottom of the page and tap
“System Update”. 2. Tap “Check for Updates” to check the firmware. A prompt will appear if a firmware update is
available. 3. Follow the prompts to finish the update. 4. The remote controller automatically restarts after the update is finished.
Method 2: DJI Assistant 2 1. Make sure the remote controller is powered off, and then connect the remote controller to a
computer using a USB 3.0 USB-C cable. 2. Power on the remote controller. 3. Launch DJI Assistant 2, and log in using a DJI account. 4. Click the Smart Controller icon, and then “Firmware Update”. 5. Select and confirm the firmware version you want to update. 6. DJI Assistant 2 will download and update the firmware automatically. 7. The remote controller will restart after update.
Make sure the remote controller has more than 50% power before updating. DO NOT disconnect the USB-C cable during the update. Make sure the remote controller or the computer is connected to the internet during the update. The update takes approximately 15 minutes.
Button Combinations
Some frequently-used features can be activated by using button combinations. To use button combinations, hold the back button and then press the other button.

19

DJI Smart Controller User Manual

Checking the available button combinations Hold the Back button until the controller vibrates to check button combinations:

11:30

Press

and then the corresponding button to perform an operation.

510%0%

Brightness Mode Screen Recording

Home

Recent

Apps

Quick Settings

Adjust Volume Screenshot

Button Combinations

Using Button Combinations The functions of the button combinations cannot be changed. The following table displays the function of each button combination.

Button Combinations Function Button + Right Wheel Function Button + Left Wheel Function Button + Record Button Function Button + Focus/Shutter Button Function Button + 5D Button (up) Function Button + 5D Button (down) Function Button + 5D Button (left) Function Button + 5D Button (right)

Description Adjust the system volume Adjust the screen brightness Record the screen Screenshot the screen Return to Homepage Open Quick Settings Check recently opened apps Open App Center

Calibrating the Compass
After the remote controller is used in places with electro-magnetic interference, the compass may need to be calibrated. A warning prompt will appear if the remote controller’s compass requires calibration. Tap the warning pop-up to start calibrating. In other cases, follow the steps below to calibrate your remote controller.
1. Enter the App Center, tap , and scroll down and tap Compass. 2. Follow the diagram on the screen to calibrate your remote controller. 3. The user will receive a prompt when the calibration is successful.

DJI Smart Controller User Manual
Blocking Third-party Notifications
To ensure safe flight, we recommend to disable third-party notifications before each flight. Follow the steps below to disable third-party notifications. 1. Enter the App Center, tap , and scroll down and tap Notifications. 2. Enable “Aerial Photography Do Not Disturb Mode”.
HDMI
A monitor can display the remote controller’s interface by connecting the remote controller to a monitor using a HDMI cable. Follow the steps below to enable the HDMI connection. 1. Swipe down from the top of the screen to open Quick Settings. 2. Follow the diagram on the screen to calibrate your remote controller. Tap HDMI to enable or
disable the HDMI connection. Hold to enter settings and adjust HDMI resolution, rotation, output mode, and screen zoom.
After-sales Information
Please visit http://www.dji.com/support for more information about after-sales service and warranty policies.

21

Specifications
OcuSync 2.0 Operation Frequency Range
Max Transmission Distance (Unobstructed, free of interference)
Transmitter Power (EIRP)
Wi-Fi Protocol Operation Frequency Range
Transmitter Power (EIRP)
Bluetooth Protocol Operation Frequency Range Transmitter Power (EIRP) General Battery Charge Type Rated Power Storage Capacity Charge Time Working Time Video Output Port Power Supply Current/ Voltage (USB-A port) Operation Temperature Range
Storage Temperature Range

2.400-2.4835 GHz; 5.725-5.850 GHz 2.400-2.4835 GHz: 8 km (FCC); 4 km (CE); 4 km (SRRC); 4 km (MIC) 5.725-5.850 GHz: 8 km (FCC) : 2 km (CE) : 5 km (SRRC) 2.400-2.4835 GHz: 25.5 dBm (FCC); 18.5 dBm (CE); 19 dBm (SRRC); 18.5 dBm (MIC) 5.725-5.850 GHz: 25.5 dBm (FCC); 12.5 dBm (CE); 18.5 dBm (SRRC)
Wi-Fi Direct, Wi-Fi Display, 802.11a/g/n/ac Wi-Fi with 2×2 MIMO is supported 2.400-2.4835 GHz; 5.150-5.250 GHz; 5.725-5.850 GHz* 2.400-2.4835 GHz: 21.5 dBm (FCC); 18.5 dBm (CE); 18.5 dBm (SRRC); 20.5 dBm (MIC) 5.150-5.250 GHz: 19 dBm (FCC); 19 dBm (CE); 19 dBm (SRRC); 19dBm (MIC) 5.725-5.850 GHz: 21 dBm (FCC); 13 dBm (CE); 21 dBm (SRRC)
Bluetooth 4.2 2.400-2.4835 GHz 4 dBm (FCC); 4 dBm (CE) 4 dBm (SRRC); 4 dBm (MIC)
18650 Li-ion (5000 mAh @ 7.2 V) Supports USB power adapters rated 12 V/2 A 15 W Rom: 16 GB + scalable (microSD**) 2 hours (Using a USB power adapter rated 12 V/2 A) 2.5 hours HDMI Port
5 V/ 900 mA
4° to 104° F (-20° to 40° C) Less than one month: -22° to 140° F (-30° to 60° C) One month to three months: -22° to 113° F (-30° to 45° C) Three months to six months: -22° to 95° F (-30° to 35° C) More than six months: -22° to 77° F (-30° to 25° C)

DJI Smart Controller User Manual

Charging Temperature Range Supported Aircraft Models***
Recommended microSD Cards
GNSS Dimensions Weight

5° to 40° C (41° to 104° F) Mavic 2 Pro, Mavic 2 Zoom, Mavic Air 2, Mavic 2 Enterprise, Mavic 2 Enterprise Dual, Phantom 4 Pro v2.0 Sandisk Extreme 32GB UHS-3 microSDHC Sandisk Extreme 64GB UHS-3 microSDXC Panasonic 32GB UHS-3 microSDHC Panasonic 64GB UHS-3 microSDXC Samsung PRO 32GB UHS-3 microSDHC Samsung PRO 64GB UHS-3 microSDXC Samsung PRO 128GB UHS-3 microSDXC GPS+GLONASS 177.5 × 121.3 × 40 mm (antennas folded, and the control sticks unmounted)
177.5 × 181 × 60 mm (antennas unfolded, and the control sticks mounted) Approx. 630 g

Local regulations in some countries prohibit the use of the 5.8 GHz and 5.2 GHz frequencies and in some regions the 5.2 GHz frequency is only allowed for indoor use.
** The Smart Controller supports microSD cards with a maximum storage capacity of 128 GB. *** The Smart Controller will support more DJI aircraft in future. Please visit the official website for
the latest information.

23

DJI Support http://www.dji.com/support
This content is subject to change. Download the latest version from http://www.dji.com/dji-smart-controller If you have any questions about this document, please contact DJI by sending a message to DocSupport@dji.com. © 2020 DJI All Rights Reserved.