LASER HPS-KANC Active Noise Cancelling Headphones User Manual

: June 13, 2024
: Laser

LASER HPS-KANC Active Noise Cancelling Headphones

LASER HPS-KANC Active Noise Cancelling Headphones

WHAT’S IN THE BOX

Kids ANC Headphones
USB-A to USB-C charging cable
User Manual

CONTROLS AND PORTS

Controls And Ports

CHARGING

Fully charge the headphones before first use.
Recharge the headphones when it is switched off.
Disconnect the cable when fully charged.

Use the supplied cable. Connect the USB-C jack to the headphones.

Connect the USB-A plug to a USB-A power source. The indicator light will turn red when charging; it will turn blue when charging is completed.

An USB-A power adaptor (5V 1A, not included) is recommended for charging, or a PC/laptop USB port can also be used.

If the headphones are not used for 5 minutes, they will automatically turn off to conserve battery life.

BLUETOOTH

PAIRING

Turn on the headphones. The indicator light will blink red/blue.
Enable Bluetooth on your connecting device. It will search for nearby Bluetooth devices.
Select “HPS-KANC” to pair and connect. The indicator light will turn solid blue.
Note: If “HPS-KANC” does not appear on your connecting device’s screen, try again from the beginning of step 1.
Audio you play on your connected device should now be heard through the headphones.

DISCONNECTING/UNPAIRING

To disconnect, turn off your connected device’s Bluetooth or the headphones.
To unpair (remove the connection entirely), go to your connected device’s Bluetooth settings, find the headphones on the list of paired devices, and select “Forget” or “Unpair”.

Note: The headphones only connect to one device at a time.

BASIC OPERATIONS

POWER ON/OFF

Press and hold the Multi-function button for 3 seconds until the indicator light turns on. Press and hold the Multi-function button for 4 seconds until the indicator light turns off.

ANC (ACTIVE NOISE CANCELLING) ON/OFF

Double click the Multi-function button to turn ANC on.
Double click again to turn ANC off.

PLAY/PAUSE MUSIC

Press the Multi-function button to play or pause the music.

VOLUME UP/DOWN

Press and hold the + or – button to increase or decrease the volume.

You can also control the volume level using your connected device.

SELECT THE NEXT/PREVIOUS SONG

When listening to music, press the + or – button to skip to the next or previous song.

ANSWER/HANG UP

When there is an incoming call, press the Multi-function button to answer the call. Press again to end the call.

REJECT

When there is an incoming call, press and hold the Multi-function button to reject the call.

SPECIFICATIONS

Bluetooth version	v5.1
Effective distance	10m
Battery capacity	200mAh
Charging voltage	5V
Play time	Up to 10 hours at 50% volume
Charging time	Approximately 2 hours
Volume limit	85 dB

TROUBLESHOOTING

DEVICE DOES NOT TURN ON

The battery is completely discharged. Recharge the battery.

NO SOUND FROM THE HEADPHONES

The volume level is low or muted. Unmute or increase the volume.
There is no connected Bluetooth device. Pair and connect a Bluetooth device and try again.

CANNOT PAIR A BLUETOOTH DEVICE WITH THE HEADPHONES

The Bluetooth device is out of range. Bring the Bluetooth device closer to the headphones.
Make sure the headphones are in Bluetooth mode. Turn off the headphones and turn them on again to switch to Bluetooth mode.
If the headphones Bluetooth name is not found on the Bluetooth list, refresh the list, or search again and wait up to 1 minute for the device to appear.
If the headphones are already paired to another device, disconnect or unpair before connecting to your selected device.

Thank you for your purchase!

Laser Corporation is 100% Australian owned & operated. To get the most out of your product please read the user manual carefully and keep for future use.

For specific information relating to your product such as Spare Parts, FAQs, Warranty claims, and more, please scan the following QR code: