harman kardon LUNA Bluetooth Speaker User Guide

June 13, 2024
harman Kardon

harman kardon LUNA Bluetooth Speaker

Product Information

  • Product Name: HK Luna
  • Features: Bluetooth pairing, music streaming, multi-point connection, stereo boost pairing, stereo boost control, charging
  • Waterproof & Dustproof Rating: IP67
  • Speaker Dimensions: 210 x 78 x 80 mm / 8.3 x 3.1 x 3.2 inches
  • Speaker Weight: 0.71 kg / 1.56 lbs
  • Woofer Size: 48 x 90 mm
  • Tweeter Size: 20 mm
  • Power Output: 1 x 25 W RMS + 1 x 15 W RMS
  • Battery Type: Li-ion polymer
  • Battery Capacity: 17.28 Wh (equivalent to 3.6 V / 4800 mAh)
  • Battery Charging Time: 2.5 hours (5 V / 3 A)
  • Battery Life: Up to 12 hours (dependent on volume level and audio content)

Product Usage Instructions

  1. Bluetooth Pairing:
    1. Go to the “Settings” menu on your device and select “Bluetooth”.
  2. Select “HK Luna” from the list of available devices.
  3. Wait for the connection to be established. The status should show “Connected”.
  4. Music Streaming:

To stream music to the HK Luna speaker, ensure that your device is connected via Bluetooth as mentioned in the “Bluetooth Pairing” section.

  1. Multi-Point Connection:
    1. Ensure that no more than 2 devices are already connected to the HK Luna speaker.
  2. If needed, disconnect any existing devices from the speaker.
  3. Follow the “Bluetooth Pairing” instructions for each device to connect them to the speaker.
  4. Stereo Boost Pairing:
    1. Ensure that the HK Luna speaker is connected to your device via Bluetooth.
  5. Press and hold the “Stereo Boost Control” button for more than 5 seconds.
  6. The left channel (L) LED should flash 5 times and the right channel (R) LED should flash once, indicating successful pairing.
  7. Stereo Boost Control:
    1. To swap the left and right channels, press and hold the “Stereo Boost Control” button for more than 5 seconds.
  8. To unpair the stereo boost pairing, press and hold the “Stereo Boost Control” button for more than 5 seconds.
  9. Charging:
    If the speaker will not be used for a long period of time, it is recommended to recharge the battery at least once every 3 months.

To charge the speaker:

  1. 1. Connect the provided USB-C charging cable to the speaker’s USB-C port.
  2. Connect the other end of the cable to a power source.
  3. The LED indicator on the speaker will show the charging progress.
  4. Once fully charged, disconnect the charging cable from the speaker.

WHAT’S IN THE BOX

BLUETOOTH PAIRING

harman-kardon-LUNA-Bluetooth-Speaker-FIG-2

MUSIC STREAMING

To reboot, press for more than 10 seconds.

harman-kardon-LUNA-Bluetooth-Speaker-FIG-4

MULTI-POINT CONNECTION

harman-kardon-LUNA-Bluetooth-Speaker-FIG-2

STEREO BOOST PAIRING

harman-kardon-LUNA-Bluetooth-Speaker-FIG-6

STEREO BOOST CONTROL

harman-kardon-LUNA-Bluetooth-Speaker-FIG-7

CHARGING

If the speaker will not be used for a long period of time, please recharge the battery at least once every 3 months. Battery life will vary due to usage patterns and environmental conditions.

harman-kardon-LUNA-Bluetooth-Speaker-FIG-8

IP67 WATERPROOF & DUSTPROOF

harman-kardon-LUNA-Bluetooth-Speaker-FIG-9

WARNING!
With USB-C charging protection, a reminder sound will alert you to unplug the cable if the connector detects water, salt, or any other chemicals. Charge your speaker after it is completely dry and clean.

harman-kardon-LUNA-Bluetooth-Speaker-FIG-10

TECH SPEC

  • Transducers: 48 x 90 mm woofer, 20 mm tweeter

  • Rated output power: 1 x 25 W RMS + 1 x 15 W RMS

  • Frequency response: 60 Hz – 20 kHz (-6 dB)

  • Signal-to-noise ratio: > 80 dB

  • Battery type: Li-ion polymer 17.28 Wh (equivalent to 3.6 V / 4800 mAh)

  • Battery charge time: 2.5 hours (5 V / 3 A)

  • Music play time: up to 12 hours (dependent on volume level and audio content)

  • USB port: USB-C (USB playback is available in US version.
    For other version, USB is for service only.)

  • Cable type: USB-C charging cable

  • Cable length: 1.2 m / 47.2″

  • Bluetooth® version: 5.3

  • Bluetooth® profile: A2DP 1.3, AVRCP 1.6

  • Bluetooth® transmitter frequency range: 2400 MHz – 2483.5 MHz

  • Bluetooth® transmitter power: ≤ 15 dBm (EIRP)

  • Bluetooth® transmitter modulation: GFSK, π/4 DQPSK, 8DPSK

  • Dimensions (W x H x D): 210 x 78 x 80 mm / 8.3″ x 3.1″ x 3.2″

  • Weight: 0.71 kg /1.56 lbs

  • Maximum operation temperature: 45 °C.

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

harman Kardon User Manuals

Related Manuals